CASE与MIS的开发

本文介绍ＣＡＳＥ技术的基本思想与构成，ＣＡＳＥ工具在ＭＩＳ开发中的作用，概要介绍国内流行的ＣＡＳＥ产品并对其作出评述。     

土钉支护结构水平位移安全监控模型研究

国内现行规范、标准是以极限变形值作为土钉支护结构水平位移安全监测报警值 ,但没有反映工程进度影响 ,不便指导工程实践。提出“过程控制”概念 ,以反正切函数为基本形式 ,基于历史经验建立“安全时程曲线”控制模型 ,要求施工过程中实测水平位移始终处在“安全时程曲线”之下 ,以确保最终变形在某一适当的阈值之内 ,已有实测结果可以为施工方案调整提供依据。通过实际案例 ,检验模型的可行性 ,表明过程控制模型较极限变形策略更具可操作性     

Undergraduate Summer Research in Structural Engineering

For the last seven years, a summer Research Experiences for Undergraduates site in structural engineering, funded by the National Science Foundation, has operated at the University of Alabama at Birmingham. During this time, 33 students from 22 colleges and universities have participated in the site. Participants are recruited nationally and have come from as far away as California and Puerto Rico. The program is intended to provide students interested in graduate studies with an introduction to research methods, and to provide students who will not continue their studies past a bachelor of science in civil engineering with a better understanding of how research provides the theoretical foundation of engineering practice. Students work individually with faculty on literature reviews, computer modeling, laboratory testing, and field research. Three students have researched structural failure case studies and the technical and ethical lessons to be learned from them. Participants also have the opportunity to tour construction sites and construction material manufacturers’ and fabricators’ facilities. During the past three years, an ethics seminar series has been added. At the end of the program, students prepare research papers and Web pages documenting their work and present their results to faculty, students, and other participants.     

基于B点磁探针膛内电枢电弧长度与速度分布测量的计算机控制系统的研究

基于B点磁探针的测量原理，建立了电磁轨道炮膛内三维等离子体电枢电弧长度和电弧运动速度测量的数学模型，通过对该模型的分析给出了用于测量膛内电枢电弧长度和运动速度分布的相应推论。开发了用于测量膛内等离子体电枢电弧长度和速度的多通道计算机控制诊断系统，并进行了相应的试验研究。     

Defect structure of gold introduced by high-speed deformation

The effect of deformation speed on defect structures introduced into bulk gold specimens at 298 K has been investigated systematically over a wide range of strain rate from ′=10⁻² to 10⁶ s⁻¹. As strain rate increased, dislocation structure changed from heterogeneous distribution, so-called cell structure, to random distribution. Also, stacking fault tetrahedra (SFTs) were produced at anomalously high density by deformation at high strain rate. The anomalous production of SFTs observed at high strain rate is consistent with the characteristic microstructure induced by dislocation-free plastic deformation, which has been recently reported in deformation of gold thin foils. Thus, the results of the present study indicate that high-speed deformation induces an abnormal mechanism of plastic deformation, which falls beyond the scope of dislocation theory. Numerical analysis of dislocation structure and SFTs revealed that the transition point of variation of deformation mode is around the strain rate of 10³ s⁻¹.     

Application of parallelized analogical planning to engineering design

Analogical planning provides a means of solving engineering problems where other machine learning methods fail. Unlike many machine learning paradigms, analogy does not require numerous previous examples or a rich domain theory. Instead, analogical planners adapt knowledge of solved problems in similar domains to the current problem. Unfortunately, the analogical planning task is an expensive one. While the process of forming correspondences between a known problem and a new problem is complex, the problem of selecting a base case for the analogy is virtually intractable.This paper addresses the issue of efficiently forming analogical plans. The Anagram planning system is described, which takes advantage of the massively parallel architecture of the Connection Machine to perform base selection and map formation. Anagram provides a tractable solution to analogical planning, with a complexity that is sublinear in the size of the plans.This paper describes the Anagram system and its parallel algorithms. The paper also presents theoretical analyses and empirical results of testing the system on a large database of plans from the domain of automatic programming.     

锆钡镧铝氟化物玻璃的分相研究

本文综述了氟化物玻璃中的分相研究。在前人研究基础上应用透射电镜，X射线能谱，电子能量损失谱及X射线衍射，差热分析等研究了锆钡镧铝氟化物玻璃中的液-液分相，发现此种现象普遍存在于该类玻璃之中。对玻璃成分与分相形貌及微观结构之间的关系、对析出晶相种类及分相与析晶的相互影响进行了研究。提出欲降低氟化物玻璃的光损耗，分相与析晶一样是不容忽视的因素。     

复合材料压缩破坏模式的缺陷敏感性

本文基于弹塑性分叉理论研究单向纤维增强复合材料的压缩破坏模式和压缩强度对缺陷的敏感性问题。对于常见复合材料,所得结论是:无缺陷或者小缺陷情况的破坏模式为倾斜破坏带;大缺陷情况的破坏模式为水平破坏带;形成水平破坏带的压力值小于形成倾斜破坏带的压力。