Change of the amorphous state by heat treatment below the glass transition temperature

This study was undertaken to elucidate the state of a polymer in the amorphous state through a change of motion of the molecular chain caused by heat treatment below the glass transition temperature. From dielectric measurements of amorphous poly(ethylene terephthalate) heat-treated below T_g, it was found that the average relaxation time, the distribution of relaxation time and the dielectric strength increase with increase of heat treatment. From these results, it was concluded that the amorphous state becomes more random by heat treatment.     

金安金沙江悬索桥隧道式锚碇变形破坏机制研究

隧道式锚碇的变形破坏机制涉及到结构与围岩的协同作用问题。以华丽高速公路金安金沙江悬索桥两岸隧道锚变形破坏机制为研究对象,利用工程类比法评价了其稳定性控制要素,设计了超载数值试验。根据塑性区的扩展过程确定了施工安全监测和需要采取预加固的重点部位,确定了隧道锚围岩的破坏模式。根据锚面监测点位移由mm到cm量级突变确定的两岸锚岩系统极限荷载均为6~8倍设计缆力,则锚岩系统的设计承载力取3倍设计缆力下变形安全是有保障的。丽江岸塑性区在10 P下贯通;华坪岸塑性区在14 P下贯通。设计缆力作用下,丽江岸锚碇最大位移1.5 mm、围岩1.2 mm、地表0.5 mm;华坪岸锚碇最大位移1.7 mm、围岩1.5 mm、地表0.7 mm,其响应顺序为后锚面监测点前锚面监测点锚碇中间岩体地表点,可作为后期结构及围岩安全监测布点和预警的参考,也证明当前设计缆力下变形和强度均是安全的。     

Sliding mode control for Markov jump linear uncertain systems with partly unknown transition rates

In this paper, based on sliding mode control approach, the robust stabilisation problem for a class of continuous-time Markovian jump linear uncertain systems with partly unknown transition rates is investigated. The transition rate matrix under consideration covers completely known, boundary known and completely unknown elements. By making use of linear matrix inequalities technique, sufficient conditions are presented to derive the linear switching surface and guarantee the stochastic stability of sliding mode dynamics. Then a sliding mode control law is designed to drive the state trajectory of the closed-loop system to the specified linear switching surface in finite time in spite of the existing uncertainties and unknown transition rates. Finally, an example is given to verify the validity of the theoretical results.     

Underactuated fingers controlled by robust and adaptive trajectory following methods

Choosing an appropriate control scheme to alleviate nonlinearities and uncertainties is not a trivial task, especially when models are not easily available and practical evaluation provides the only means for actual performance assessment. Various factors can contribute to these nonlinearities and uncertainties, such as friction and stiction. Thus, this article investigates four different control schemes, namely PID, adaptive, conventional sliding mode control (SMC) and integral sliding mode control (ISMC) which are implemented in the Bristol Elumotion Robot Hand (BERUL) to analyse and overcome the aforementioned problems. The hand has five fingers with 16 joints and all fingers are underactuated. The implementation of the proposed control schemes are challenging since the BERUL fingers have significant friction, stiction and unknown parameters. The fingers are light in weight and fragile. Comparative performance characteristics have shown that the ISMC is the most suitable candidate to provide good experimental trajectory following and positioning control for underactuated BERUL fingers.     

H.264/SVC mode decision based on mode correlation and desired mode list

Design of video encoders involves implementation of fast mode decision (FMD) algorithm to reduce computation complexity while maintaining the performance of the coding. Although H.264/scalable video coding (SVC) achieves high scalability and coding efficiency, it also has high complexity in implementing its exhaustive computation. In this paper, a novel algorithm is proposed to reduce the redundant candidate modes by making use of the correlation among layers. A desired mode list is created based on the probability to be the best mode for each block in base layer and a candidate mode selection in the enhancement layer by the correlations of modes among reference frame and current frame. Our algorithm is implemented in joint scalable video model (JSVM) 9.19.15 reference software and the performance is evaluated based on the average encoding time, peak signal to noise ration (PSNR) and bit rate. The experimental results show 41.89% improvement in encoding time with minimal loss of 0.02 dB in PSNR and 0.05% increase in bit rate.     

关于中压电缆网双环接线方式供电能力的分析

结合北京地区现阶段对相关技术的规定,以实际供用电方案为例,对中压电缆网双环接线方式的供电能力进行深入讨论。通过设计环网单元划分,发现某些条件下双环网供电能力可以得到进一步提升。     

关于软件对字符编码方式误判的研究

针对目前字符编码方式众多的现状,应用软件如何更好的判断文件编码属于何种字符集,并将其正确的解码成为不容忽视的问题。针对Windows记事本不能正常显示"联通"二字的Bug进行分析,利用Winhex软件解析文件获得16进制编码,根据得到的编码分析误判原因,通过注释记事本IsTextUTF8函数对分析得到的误判原因进行证实,进一步找到了更多Windows记事本无法正常显示的汉字。     

陕西秦岭山地体育旅游资源特征及开发模式分析＊

体育旅游作为一种新兴的旅游产品,正在慢慢走近人们的生活中。它将体育与旅游结合起来,在满足了人们休闲旅游需求的同时,也锻炼了身体,因此,受到了许多人的青睐。特别是山地体育旅游,它已经成为了广大旅游者的首要选择。在山地体育旅游蓬勃发展的大背景下,着重研究了陕西秦岭的山地体育旅游资源,分析了它的优势,并提出了合理的建议,以促进山地体育旅游的发展。     

大学论文评审系统的设计与实现

详细介绍了大学论文评审系统的应用开发背景、系统开发方案、系统功能结构设计、数据库设计以及系统功能的实现。系统基于B/S模式,采用DreamWeaverCS3、ASP和Access数据库开发,实现了用户登录验证,学生在线提交论文、查询论文评审信息、发表留言,专家在线查询、下载和评审论文以及回复留言,管理员后台数据管理等功能,提高了大学论文评审的效率,实现了大学论文评审和管理的高效性、数字化和网络化。