人造金刚石用石墨片生产工艺的改进

为了适应国内金刚石市场对高质量金刚石的需要，对原有的人造金刚石用石墨片的生产工艺进行了改进。     

多标准视频编码器下的运动估计评估

运动估计是视频编码过程中最为复杂和耗时的阶段。为分析和优化其性能,从多个流行的开源视频编码器中提取出单独的运动估计算法模块,根据视频分辨率和视频内容的不同建立程序输入集,从而构成一套完整的测试程序集合。利用性能分析工具对算法性能和微体系结构性能进行量化分析,给出这些算法在当今主流处理器体系结构上的性能差异。实验结果表明,复杂视频和高分辨率视频下的运动估计算法耗时最长,且大部分算法的指令级并行性没有太大差异。算法最后一级高速缓存的缺失率和分支误预测率都较低,分别在0.01%和7%以下。     

The creation of the 3107 cm hydrogen absorption peak in synthetic diamond single crystals

The 3107 cm⁻¹ hydrogen related local mode was produced in HPHT grown diamonds after annealing at temperatures above 2100°C. A correlation was found between the intensity of the peak and the concentration of nitrogen at different locations of the same specimen. The peak position did not shift in ¹⁵N doped samples.     

Ru-doped nanostructured carbon films

Pure and Ru-doped carbon films are deposited on Si (100) substrates by electron cyclotron resonance chemical vapor deposition. The films are characterized by transmission electron microscopy, electron energy loss spectroscopy, energy dispersive X-ray spectroscopy and atomic force microscopy. In both the pure and Ru-doped samples, diamond nanocrystallites are formed in amorphous carbon matrices. The Ru-doped film contains much smaller diamond nanocrystallites (approx. 3 nm) than the pure samples (approx. 11 nm). Lower surface roughnesses are observed in both pure and Ru-doped samples as compared to other reported nanocrystalline diamond films. The conductivity of the Ru-doped film is significantly higher than that of the pure film. The results show that Ru-doped nanocrystalline diamond films have unique structures and properties as compared to pure nanocrystalline diamond films or metal doped diamond-like carbon films, which may offer advantages for electrochemical, optical-window, field emission or tribological applications.     

自清洁外墙涂料的研究与应用

如何提高外墙涂料的自清洁能力,并使之保持较长的装饰效果一直是涂料界关注的热点。本文综述了微粉化技术、荷叶效应、气球陶瓷理论、自分层技术以及光催化效应的原理,及其在改善外墙涂料自清洁性方面的应用。     

斜拉桥预应力混凝土索塔锚固结构受力性能分析

为了研究U形与直线预应力束混合布置索塔锚固结构的受力特性,以国内某姊妹塔斜拉桥的菱形桥塔为例,采用通用有限元程序建立索塔锚固结构的节段有限元模型,分析索塔锚固结构在预应力荷载与斜拉索水平力共同作用下的受力情况。结果表明:在索塔锚固结构中采用U形与直线预应力束混合布置能较好的满足设计要求,使锚固区整体处于较为合理的压力状态之下,除局部的应力集中外,基本消除了斜拉索作用下顺桥向塔柱的拉应力;在齿块与塔柱内壁的结合处存在应力集中现象,应当引起足够的重视,施工时应严格控制施工质量。     

单晶金刚石膜与多晶金刚石膜的制备工艺及性能

本文主要介绍了用微波等离子体化学气相沉积法(以下简称MP CVD法)以甲醇-氢气混合气和丙酮-氢气混合气为源气体,分别以单晶硅的(111)面和人造金刚石的(100)面为衬底材料,制备出了面积为20mm×20mm厚为10μm的多晶金刚石膜和面积为1.0mm×1.0mm厚为5μm的单晶金刚石膜。通过试验发现,源气体配比和衬底温度对薄膜质量起决定性作用。另外,衬底在反应腔中的位置对薄膜的生成也有很大影响。单晶金刚石膜制备过程中衬底金刚石的晶体取向与金刚石薄膜的生长及质量有密切的关系。在金刚石的(100),(110)和(111)面上分别获得了单晶金刚石膜和金刚石多晶粒子。选用扫描电镜、显微激光拉曼、反射电子衍射对多晶金刚石膜及单晶金刚石膜的性能进行了测试。     

EPR study of hydrogen-related defects in boron-doped p-type CVD homoepitaxial diamond films

Boron-doped p-type single crystalline chemical vapor deposition (CVD) homoepitaxial diamond films were investigated by electron paramagnetic resonance (EPR). Carbon dangling bond defects, which were accompanied by a nearby hydrogen atom, were observed in boron-doped p-type CVD diamond films on a IIa substrate similar to those observed in undoped diamond. This result suggested that the energy level position of the defects is located below the Fermi energy of boron-doped diamond, at around 0.3 eV above the valence-band top. The reason why the Fermi energy could be changed by the incorporation of boron atoms at low density (10¹⁶–10¹⁷/cm³) in the film in spite of the existence of the large defect density of EPR centers (10¹⁸/cm³) is thought to be that the singly occupied electron states of defects are located near the band edge. As for the thermal annealing effect of the defects, it was revealed that the concentration of the defects and the mobility of the p-type film did not change after annealing up to 1200 °C which is much higher than the temperature of boron–hydrogen pair dissociation.     

Structure of the Reaction Zone of a Steady Detonation Wave in Dinitrodiazapentane

The massvelocity profiles in 2,4dinitro2,4diazapentane samples of different densities were registered by a laser interferometer and the electromagnetic technique. The reaction time was shown to reach 300 nsec and weakly depend on density, while the pressure in the chemical spike can be twice as high as that at the Chapman–Jouguet point. No special features due to diamond formation were observed in the massvelocity profiles registered in the chemical reaction zone.     

激光焊接金刚石工具过渡层预合金粉末的试验研究

目前可以用于制备激光焊接金刚石工具过渡层粉末的方法主要有机械混合法、雾化法和化学共沉淀法。化学共沉淀法生产的粉末成分均匀,实现了粉末的预合金化,并且设备简单,生产成本低。此次试验采用草酸盐化学共沉淀法,成功制备了3种不同成分的激光焊接金刚石工具过渡层预合金粉末。焊接强度测试表明,3种粉末的焊接强度均满足欧盟EN13236安全标准,其中2#粉末的焊缝强度最高。X射线物相分析结果表明,3种粉末的主相都是Co3Fe7和CoFe。此外,固定Fe与Co的质量比,加入2wt.%的铜可以有效提高预合金粉末过渡层的焊接强度和稳定性。这是因为,Cu原子完全溶入到Co3Fe7或CoFe晶胞中并形成固溶体,产生了固溶强化。