基于遍历矩阵和混合密钥的验证和图像空域加密技术

由于图像与人感知外部世界的基本手段相吻合,因此相关的信息量有可能涉及到个人隐私、商业利益、军事机密等,所以多媒体信息的安全问题变得越来越重要。传统的加密系统,如RSA、DES、IDEA、SAFER和FEAL等,其加密速度慢而且不能有效去除相邻像素的相关性,不适合用于图像加密。经过二十多年研究的混沌加密系统具有良好的特性适合图像加密,但大部分是基于对称加密。对称加密比非对称加密速度更快,但是对于密钥的管理制约了其广泛的使用,为了弥补这一缺陷,文章提出混合密钥机制,不仅可用于图像加密,而且可用于验证。遍历矩阵在加/解密系统中不仅作为公开密钥存在,而且是图像置乱和扩散的关键参数。实验结果表明,与现有的混沌加密系统相比,文章提出的图像加密技术彻底置乱和扩散原始图像,并且拥有至少3.08＆#215;105898个密钥的巨大空间,因此足够抵制蛮力攻击。相比于现有的混沌密码系统,文章的实验测试结果更加乐观,在C语言下,置乱和扩散阶段的执行时间相当稳定（分别是1.9-2.0毫秒和2.0-2.1毫秒）。与Yang和Ismail所提出的算法相比,根据文章中的性能评估、敏感度分析和统计分析,文章所提出的算法具有更高的安全性,并且适用于网络传输。     

Dispirations,disclinations, dislocations,and chain twist in polyethylene crystals

It is proposed that the twist in polyethylene chains that can result from crystallization and subsequent deformation aggregates at boundaries and becomes a template for further reorganization that results in the long period observed in polyethylene fibres. The observed lower density at the boundaries requires the transport of free volume to the twist boundaries. Dispirations, disclinations and dislocations are crystallographic defects that are involved in the necessary transport mechanism. Twist and bend, derived from the Eulerian angles which are computed from the sets of chain internal coordinates, relate the orientation of different segments of a chain. Twist and bend are useful for the characterization of both crystallographic defects and arbitrary conformations of polymer chains. Defects, along with folds, chain ends, and ordinary edge and screw dislocations provide a basis for interpretation of structure-property relationships in solid polyethylene.     

A Thermo-Mechanical Study of Some Epoxy Adhesives Subjected to Combined Dynamic and Static Stresses

The object of the present study was to investigate the effect of superimposed dynamic and static stresses on mechanical and thermal properties of some epoxy adhesives. It was found that combinations of shear creep and torsional oscillations, applied simultaneously to adhesive joints at temperatures within the glassy range of the adhesive, led to strengthening of the joints in shear and to an increase in the glass transition temperature of the adhesive. Similar loading stresses applied at temperatures close to the T_g of the adhesive, led to opposite effects on the above mentioned properties of the joints. The width of the glassy-rubbery transition of the adhesives increased, in the whole range of temperatures used in this study and for all epoxy compositions, as a result of subjecting the joints to superimposed dynamic and static stresses. The broadening of the glass transition was interpreted as a result of the stiffening of polymer network during the combined stressing experiments. A linear relationship was found between the area of endothermal peaks in the first DSC scan of specimens subjected prior to test to superimposed dynamic and static stresses at temperatures below T_g, and the shear strength of the joints. In agreement with this observation and with literature data, a linear relationship was revealed also between the glass transition temperature of the resins (measured in the first DSC scan) and the shear strength of the joints. Based on experimental observations and on some literature information, it was suggested that the strengthening of the joint, as well as the changes in thermal properties of the adhesives, are mainly due to physical processes, such as short-range orientation of network chains and an increase in intermolecular interaction between highly polar sites of the network. The possibility that superimposed stressing led to changes in chemical crosslinking was discussed but it seems that no such reactions occurred.     

HOW LIQUIDS SPREAD ON SOLIDS

A theory of the wetting of solids by liquids is put forward. The theory accounts for capillary pressure gradient, gravitational potential gradient, surface tension gradient, disjoining pressure gradient driving forces of flow in thick thin-films and of surface diffusion in thin thin-films. Disjoining pressure stems from the way intermolecular forces aggregate in submicroscopically thin films. For thick thin-films of slowly varying thickness the lubrication approximation to velocity distributions is appropriate. With this approximation the spontaneous, unsteady, two-dimensional spreading of liquid is shown to be governed by a nonlinear convective-diffusion equation for the evolution of the film thickness profile. The predictions of the theory agree with Marmur and Lelah's (1980, 1981) observations of water drops spreading on glass and with Bascom, Cottington and Singleterry's (1964) and Ludviksson and Lightfoot's (1971) observations of oils spreading on high energy surfaces. The theory is used to analyze Derjaguin and co-workers' (1944, 1957, 1970) blowing-off experiments designed to measure thin-film rheology. The theory is also used to buttress the proposition that much contact angle hysteresis is due simply to slow attainment of equilibrium.     

Initial density dependence of experimental viscosities and of calculated diffusion coefficients of the binary vapor mixtures methanol-benzene and methanol-cyclohexane

The paper reports experimental results for the viscosity of the vapor mixtures methanol-benzene (five mole fractions with densities up to 1.5kg·m^–3 and 0.022 mol·L ^–1) and methanol-cyclohexane (four mole fractions with densities up to 1.9kg·m^–3 and 0.026 mol·L ^–1). In analogy to the pure components, the measurements on the mixtures were carried out with an oscillating-disk viscometer with small gaps, completely made of quartz, beginning as near as possible to room temperature and continuing to a maximum temperature of 630 K. A first evaluation by means of the Chapman-Enskog theory of dilute gases has shown differences in the resulting values of the interaction viscosity _ij ⁽⁰⁾ in the limit of zero density exceeding the experimental errors. Consistent results were obtained by taking into account the initial density dependence of the viscosity within the framework of the modified Enskog theory for gaseous mixtures. The values of _ij ⁽⁰⁾ were also used to estimate binary diffusion coefficients of the mixtures.     

一种适应光照多变的夜间前景提取方法

夜间前景提取是智能监控的必要处理过程,也是新时代下店铺防盗的高效手段。提出了一种在强弱光多变下具有检测鲁棒性的动态目标自动提取算法。在亮度通道上利用直方图均衡技术根据设置参数自适应灰度增幅,结合Canny边缘图像进行差分处理,最后给出前景提取算法。实验结果表明:在强弱光不同光照环境下,该方法可以很好的削弱不同光照对前景提取带来的多噪声、过度曝光等影响,提高前景对比度,相比其他方法,显示效果清晰完整,并满足实时性要求。     

基于反应扩散方程的水平集结构拓扑优化方法与实现

为实现更加先进的拓扑优化算法,研究采用反应扩散方程的水平集结构拓扑优化方法,通过理论推导给出算法中的参数选择建议.该方法允许在拓扑优化过程中生成新的孔洞,初始结构无须包含孔洞,不需要重新初始化步骤,从而可提高算法的收敛性.针对传统拓扑优化中主要采用体积约束、以柔度最小为目标和体积保留率设定存在一定主观性的问题,探究不同体积保留率下的结构应力水平的变化规律,结果显示可以依据结构最大应力水平与体积保留率的变化规律确定最优体积保留率.     

一类SP结构的不可能差分区分器证明

针对分组密码SP结构的不可能差分区分器轮数的下界进行证明,提出的方法使用线性代数的理论,对系数矩阵P及P-1进行分析,提出了系数矩阵部分子空间存在两个行向量线性相关时,可证明至少存在四轮不可能差分区分器。uBlock算法是SPN结构,提出的方法对uBlock算法进行了分析验证,说明了结论的正确性,进一步,使用该算法搜索到比uBlock算法设计文档更多的不可能差分区分器。针对SPN结构线性扩散层P,使用了本原指数的概念,使用线性扩散层P的本原指数对SPN结构不可能差分的轮数进行论证。分析结果表明,分组密码SP结构至少存在四轮不可能差分区分器。     

求解声波动方程的隐格式有限体积法

为研究声传播问题,提出一种声波动方程的隐格式有限体积法,该方法将格点型有限体积法与Newmark格式相结合.模拟平面波的传播过程,对比分析隐格式有限体积法和文献中显格式有限体积法的精度、稳定性及计算消耗等方面的性能.数值结果表明:当λ/Δx≥10时,两种算法均能得到满足精度要求的解;采用无条件稳定的隐格式算法,当满足ω0Δt≤0.3时,预测声压的相对峰值误差1%;当采用相同时间、空间步长时,隐格式算法精度高于显格式算法;隐格式算法对吸收边界的处理精度高于显格式算法,但对全反射边界的处理精度低于显格式算法;两种算法内存消耗比较接近,显格式算法的CPU耗时较少.     

Finite difference method for dynamic response analysis of anchorage system简

Based on some assumptions, the dynamic analysis model of anchorage system is established. The dynamic governing equation is expressed as finite difference format and programmed by using MATLAB language. Compared with theoretical method, the finite difference method has been verified to be feasible by a case study. It is found that under seismic loading, the dynamic response of anchorage system is synchronously fluctuated with the seismic vibration. The change of displacement amplitude of material points is slight, and comparatively speaking, the displacement amplitude of the outside point is a little larger than that of the inside point, which shows amplification effect of surface. While the axial force amplitude transforms considerably from the inside to the outside. It increases first and reaches the peak value in the intersection between the anchoring section and free section, then decreases slowly in the free section. When considering damping effect of anchorage system, the finite difference method can reflect the time attenuation characteristic better, and the calculating result would be safer and more reasonable than the dynamic steady-state theoretical method. What is more, the finite difference method can be applied to the dynamic response analysis of harmonic and seismic random vibration for all kinds of anchor, and hence has a broad application prospect.