Exact integration in the boundary element method for two-dimensional elastostatic problems

This paper derives the exact integrations for the integrals in the boundary element analysis of two-dimensional elastostatics. For facilitation, the derivation is based on the simple forms of the fundamental functions by taking constant, discontinuous linear and discontinuous quadratic elements as examples. The efficiency and accuracy of the derived exact integrations are verified against five benchmark problems; the results indicate that the derived exact integrations significantly reduces the CPU time for forming the matrices of the boundary element analysis and solving the internal displacements.     

金属包覆平板波导模式特性的有限元法分析

采用有限元法（FEM）分析了具有复数折射率的金属包覆介质波导的模折射率与模场分布情况。计算了具有损耗层的6层介质平板波导模折射率，并与解析解比较，二者有较好的一致性；分析了金属包覆3层平板波导中TM模折射率与波导芯厚度的变化关系，计算了金属包覆5层平板波导中TM模折秧经与金属层厚度的变化关系，并结合对模场分布的分析对模式进行了定性判断，给出了其模式演变过程。     

Boundary knot method for 2D and 3D Helmholtz and convection–diffusion problems under complicated geometry

The boundary knot method (BKM) of very recent origin is an inherently meshless, integration‐free, boundary‐type, radial basis function collocation technique for the numerical discretization of general partial differential equation systems. Unlike the method of fundamental solutions, the use of non‐singular general solution in the BKM avoids the unnecessary requirement of constructing a controversial artificial boundary outside the physical domain. The purpose of this paper is to extend the BKM to solve 2D Helmholtz and convection–diffusion problems under rather complicated irregular geometry. The method is also first applied to 3D problems. Numerical experiments validate that the BKM can produce highly accurate solutions using a relatively small number of knots. For inhomogeneous cases, some inner knots are found necessary to guarantee accuracy and stability. The stability and convergence of the BKM are numerically illustrated and the completeness issue is also discussed. Copyright © 2003 John Wiley & Sons, Ltd.     

Solution of large deformation contact problems with friction between Blatz-Ko hyperelastic bodies

The present paper is devoted to the analysis of the contact problems with Coulomb friction and large deformation between two hyperelastic bodies. One approach to separate the material nonlinearity and contact nonlinearity is presented. The total Lagrangian formulation is adopted to describe the geometrically nonlinear behavior. Nondifferentiable contact potentials are regularized by means of the augmented Lagrangian method. Numerical examples are carried out in two cases: rigid-deformable contact and deformable-deformable contact with large slips. The numerical results prove that the proposed approach is robust and efficient concerning numerical stability.     

腐蚀算法在重建一类特殊管道中的应用

针对一类特殊而不能直接对其观察的管道（如动物的血管），为了准确了解其内部特征和形态，借助计算机给出了一种用腐蚀算法来重建管道原形的方法。这种方法简单易行，而且精确度高。     

主动约束层阻尼板结构动力学建模研究

将有限元法和GHM法相结合，给出了建立主动约束层阻尼（ACLD）板结构动力学模型的新方法。建模时，考虑到粘弹材料（VEM）的纵向位移影响，采用GHM方法描述VEM的本构关系，解决了VEM的力学特性随温度和频率变化的难点，避免因VEM的复杂本构关系而产生的微分积分方程。算例表明本文给出的建模方法是准确的，ACLD结构能够有效控制结构振动。     

Finite elements in the analysis of pressure vessels and piping-a bibliography (1976–1996)

The paper gives a bibliographical review of the finite element methods (FEMs) applied for the analysis of pressure vessel structures/components and piping from the theoretical as well as practical points of view. The range of applications of FEMs in this area is wide and cannot be presented in a single paper; therefore the aim of this review is to give the reader an encyclopaedic view of the differnt possibilities that exist today for the finite element analysis in the fields of pressure vessels and piping. The bibliography at the end of the paper contains approximately 1900 references to papers, conference proceedings and theses/dissertations on the subject that were published in 1976–1996. These are classified in the following categories: linear and non-linear, static and dynamic, stress and deflection analysis; stability problems; thermal problems; fracture mechanics problems; contact problems; fluid-structure interaction problems; manufacturing of pipes and tubes; welded pipes and pressure vessel components; development of special finite elements for pressure vessels and pipes; finite element software; and other topics. Also finite element software, general purpose and special purpose codes, used for the analysis of pressure vessels and pipes are briefly discussed and presented.     

Implementation of multipoint connections in an ATM switching network

This paper presents the problems in the implementation of multipoint connections at switching level using the example of an ATM switching network. By choosing the proper routeing mechanism and the appropriate architecture of the switching element, a switching network can gradually be adapted to an increasing share of multipoint traffic. The first section describes the problems with the handling of multipoint connections within a multiple stage connection oriented switching network. In particular this refers to the routeing of the cells through the switching network. Several alternatives on this issue are discussed. Both, the selected approach based on a differentiated self-routeing mechanism and the corresponding cell format are introduced. In the second part of this article several switch architectures are compared in respect of their multipoint capability. It is demonstrated that at present the most promising solution are switching elements based on the principle of central buffering. A single chip solution using this concept is employed in the presented switching network.     

用边界元法提取VLSI版图电阻

介绍了ＶＬＳＩ版图验证中电阻提取的基本原理和主要方法，给出了一种新颖的基于边界元法的电阻提取算法。该算法采用变节点单元，较好地解决了实际问题中经常出现的角点问题。通过应用该算法对几个实例进行提取，证明使用本文的算法不仅在精度上而且在占用ＣＰＵ时间上都取得了令人满意的效果     

强激光的时间整形和空间整形——利用双折射透镜组实现激光束的空间整形

本文使用琼斯矩阵方法对双折射透镜组空间整形系统的光强透射率分布和工作特性进行了分析,并讨论了工程设计中参数的选择以及加工误差带来的影响等有关问题.