两级数据融合算法在木材干燥过程中的应用

本文提出了一种基于RBF神经网络和证据理论的两级数据融合方法。利用RBF神经网络实现特征层数据融合,建立基本信任分配函数,具有最佳一致逼近特性,同时解决了D-S证据理论确定基本信任分配函数困难的问题。基于D-S证据理论的传感器故障诊断方法的研究,可有效地判断工业现场传感器的工作状态。实验结果表明该方法可正确定位并准确分离出木材含水率检测系统中失效传感器。     

基于BP神经网络的故障诊断技术研究

分析了传统的故障诊断方法的特点和缺点,在此基础上选择BP神经网络应用于故障诊断,详细探讨了BP神经网络的建模方法,根据设备的层次结构和特点,将集成神经网络应用于故障诊断,有效地克服了单一神经网络故障诊断的一些缺点,大大提高了故障诊断的效率和准确率.     

隐核最小二乘分类器在故障诊断中的应用

作为一种基于正定核的学习方法,传统支持向量机(Support Vector Machine,SVM)能较好地解决小样本、非线性、过学习、维数灾和局部极小等问题,从而广泛应用于模式识别、回归估计等领域。当前,核方法及其在故障诊断中的应用引起了人们的广泛重视并成为研究热点。为解决传统支持向量对核函数正定性的限制及求解速度不高的缺陷,通过引入最小二乘支持向量机分类算法提高学习速度,采用隐核特征映射技术实现核函数的进一步扩展,提出了一种新的隐核最小二乘分类器(HKLSC)算法。将其应用于实际工业过程的故障诊断中并根据采集的滚动轴承数据进行了仿真。结果表明,该隐核分类器具有很好的故障诊断性能,为故障诊断提供了一种新的有效途径。     

多轴转向车辆转向杆系的受力分析

某采用机械式液压助力转向的多轴转向车辆,经常出现转向杆系损坏的现象.为了分析转向杆系损坏的原因,进一步提高系统的可靠性,通过大型工程分析软件ADAMS对转向杆系进行虚拟样机建模.利用模型对转向杆系进行了虚拟试验分析,给出了各杆件受力分析的仿真结果.仿真结果分析表明造成转向杆系损坏的原因是由于受力过大,并提出了相应的改进措施.通过改进后测试,对虚拟样机的仿真结果进行了对比,证明虚拟样机模型是正确的,改进措施是有效的.结果使整个杆系最大受力降低了30%.     

基于贝叶斯网络的复杂装备D-S诊断

利用D-S证据理论进行故障诊断时,首先需要确定出故障识别框架和基本置信分配.但在导弹武器等复杂装备中,存在着故障原因与故障征兆之间关联关系不确定的现象,增加了求取故障识别框架和基本置信分配的困难.文中提出了利用贝叶斯网络理论来解决难题的方法,使D-S证据理论能在复杂装备故障诊断中得到应用.文中首先给出了诊断贝叶斯网络的适应度函数,并利用改进的粒子群优化算法求解了诊断贝叶斯网络.然后分析了诊断贝叶斯网络中故障原因与故障征兆间的关联关系,给出了征兆集合、异因征兆集合概念.提出了求解故障识别框架和基本置信分配的方法.最后,通过实例的D-S诊断,验证了所提方法的正确性.     

多主体诊断系统的建模及应用

将智能主体技术引入复杂故障诊断领域,建立了一种基于多主体的复杂诊断系统结构模型,对诊断问题任务辨识、分解、各主体的内部诊断机制、多主体间的交互、协作、关联模型以及诊断决策问题等进行了深入研究,并重点描述了诊断问题的故障分解与控制策略。在某企业安全监控系统的应用中,该模型能快速、准确地进行故障成因分析,给出合理的决策意见,取得了很好的诊断结果,显著提高了企业的安全运行效率。     

舰载武器系统局部故障分析方法与研究

针对舰载电子与武器装备结构复杂、设备数量庞大、分布舱室多、检测点分散不集中等问题,在充分调研论证基础上,以系统局部故障分析研究为切入点,提出适用于舰船武器装备特点的局部故障的分析方法;对系统的局部故障我们采用故障树的方法进行界定,并通过核心路径跟踪技术来确定检测点;采用核心路径在线故障检测方法,有效地节省测试资源,提高测试效率。     

化工设备故障诊断仿真模型设计及计算分析

通过化工设备的结构模型、功能模型建立仿真模型,在对仿真模型分析的基础上得到症状与故障之间的数量关系并进行分析计算,推断出潜在的故障模式,为设计化工设备故障诊断专家系统奠定基础。     

Horizontal Voting Ensemble Based Predictive Modeling System for ColonCancer

Colon cancer is the third most commonly diagnosed cancer in the world. Most colon AdenoCArcinoma (ACA) arises from pre-existing benign polyps in the mucosa of the bowel. Thus, detecting benign at the earliest helps reduce the mortality rate. In this work, a Predictive Modeling System (PMS) is developed for the classification of colon cancer using the Horizontal Voting Ensemble (HVE) method. Identifying different patterns in microscopic images is essential to an effective classification system. A twelve-layer deep learning architecture has been developed to extract these patterns. The developed HVE algorithm can increase the system’s performance according to the combined models from the last epochs of the proposed architecture. Ten thousand (10000) microscopic images are taken to test the classification performance of the proposed PMS with the HVE method. The microscopic images obtained from the colon tissues are classified into ACA or benign by the proposed PMS. Results prove that the proposed PMS has ~8% performance improvement over the architecture without using the HVE method. The proposed PMS for colon cancer reduces the misclassification rate and attains 99.2% of sensitivity and 99.4% of specificity. The overall accuracy of the proposed PMS is 99.3%, and without using the HVE method, it is only 91.3%.     

CNN parameter design based on fault signal analysis and its application in bearing fault diagnosis

As a representative deep learning network, Convolutional Neural Network (CNN) has been extensively used in bearing fault diagnosis and many good results have been reported. In Prognostics and Health Management (PHM) field, the CNN’s input size is usually designed as a 1D vector or 2D square matrix, and the convolution kernel size is also defined as a square shape like 3 × 3 and 5 × 5, which are directly adopted from the image recognition. Though satisfying results can be obtained, CNN with such parameter specifications is not optimal and efficient. To this end, this paper elaborated the physical characteristics of bearing acceleration signals to guide the CNN design. First, the fault period under different fault types and shaft rotation frequency were used to determine the size of CNN’s input. Next, an exponential function was involved in fitting the envelope of decaying acceleration signal during each fault period, and signal length within different decaying ratios was used to define the CNN’s kernel size. Finally, the designed CNN was validated with the Case Western Reserve University bearing dataset and Paderborn University bearing dataset. Results confirm that the physics-guided CNN (PGCNN) with rectangular input shape and rectangular convolution kernel works better than the baseline CNN with higher accuracy and smaller uncertainty. The feasibility of designing CNN parameters with physics-guided rules derived from bearing fault signal analysis has also been verified.