结构-波浪-海床耦合系统中大圆筒结构的波压力响应

以沉入式大圆筒结构为对象，通过设计随机波浪水槽实验，测取了在单筒和连续筒两种结构型式、两种沉入深度和两种波谱输入下结构表面的动波压力分布。波面高度以及波压力历程均在领域进行分析。通过计算结构表面沿高程和沿环向的波压力谱及波压力传递函数，将单筒实测结果与基于线性绕射理论的解析解进行了比较，同时也详细对比了两种结构型式下的实测结果。文中汇报了在研究中获得的新发现及进行的相应分析，特别是在结构——波浪——海床动力相互作用下对波压力响应机理以及针对连续筒的研究，可为工程应用提供有价值的参考。     

Bayesian and Dempster-Shafer fusion

The Kalman Filter is traditionally viewed as a prediction-correction filtering algorithm. In this work we show that it can be viewed as a Bayesian fusion algorithm and derive it using Bayesian arguments. We begin with an outline of Bayes theory, using it to discuss well-known quantities such as priors, likelihood and posteriors, and we provide the basic Bayesian fusion equation. We derive the Kalman Filter from this equation using a novel method to evaluate the Chapman-Kolmogorov prediction integral. We then use the theory to fuse data from multiple sensors. Vying with this approach is the Dempster-Shafer theory, which deals with measures of “belief”, and is based on the nonclassical idea of “mass” as opposed to probability. Although these two measures look very similar, there are some differences. We point them out through outlining the ideas of the Dempster-Shafer theory and presenting the basic Dempster-Shafer fusion equation. Finally we compare the two methods, and discuss the relative merits and demerits using an illustrative example.     

A frequency domain approach to fault detection in sampled-data systems

This paper deals with fault detection problems in sampled-data (SD) systems. A tool is first introduced for the analysis of intersample behavior of SD systems in the frequency domain from the viewpoint of fault detection and isolation. Based on it, a direct design approach of fault detection systems for SD systems is proposed, and further the problem of full decoupling from unknown disturbances is studied.     

燕山石化巨型塔器整体液压连续平移技术

北京燕山石化两巨型塔器在国内首次使用整体液压连续平移技术安装成功。该项技术可缩短工期,降低费用,提高安装的平稳性。     

On integral equation approaches to the mechanics of fibre-crack interaction

The paper examines the problem of a penny-shaped crack which is formed by the development of a crack in both the fibre and the matrix of a composite consisting of an isolated elastic fibre located in an elastic matrix of infinite extent. The composite region is subjected to a uniform strain field in the direction of the fibre. The paper presents two integral-equation based approaches for the analysis of the problem. The first approach considers the formulation of the complete integral equations governing the associated elasticity problem for a two material region. The second approach considers the boundary integral equation formulation of the problem. Both methods entail the numerical solution of the governing integral equations. The solutions to these integral equations are used to evaluate the stress intensity factor at the boundary of the penny-shaped crack.     

自身相位噪声测量的分析

本文分析一种不需要参考（标准）信号源的相位噪声测量系统，该系统在被测通道里插入窄带晶体滤波器滤除被测信号的大部分噪声，作为参考信号再与被测信号进行比较，实现了信号源自身相位噪声的测量．本文还介绍一种自动相位噪声谱测量装置     

基于邻域统计特性的概率神经网络及其在自动目标识别中的应用

在概率神经的一种改进模型－ＦＤＯ网络的基础上，提出在设计网络收敛域时进一步考虑每一像素点周围８邻域的影响，对网络的作用函数加以修，使改进后的网络具有稳定性好且收敛速度快的优点。通过实验对改进前后网络的识别性能加以比较，证明改进后的网络特别适用于噪声图像的识别。     

A BOUNDARY INTEGRAL EQUATION AND ITS NUMERICAL SOLUTION OF POTENTIAL FLOW AROUND SURFACE-IRREGULA-RITIES

In this paper,using complex functional theory,the authors turn the potentialflow around the surface irregularities in a pressure conduit and semi-infinite platforms intoDirichlet problem.Based on Schwarz formula and by the application of Plemelj's formula,theauthors change the problem into the integration of a Cauchy boundary integral equation in theflow plane through the substitution of variables.Using numerical integration,the authors obtainthe velocity distribution and pressure coefficient along surface irregularities and platforms.Thephysical concept of this method is clear,the convergent speed is rapid and the computative effi-ciency is high.The calculated values agree well with the measured results.It is an effective andsimple method in solving potential flow.     

二维金属凹槽填充各向异性介质时散射的边界元方法:TE情形

由各向异性介质无界空间Green函数和Green恒等式出发，推导了TE波入射时二维任意截面金属凹槽填充各向异性介质时所满足的边界积分方程，并用边界元法和广义网络原理计算了金属凹槽填充各向异性介质时的散射。用文中方法退化计算了凹槽填充各向同性介质时的散射，计算结果与解析结果一致。并给出了凹槽填充各向异性介质时的散射算例。     

铁电体尺寸对其开关特性的影响

应用铁电体极化反转的Orihara Ishibashi理论 ,讨论了圆形铁电薄膜和球形铁电体的开关电流以及开关时间对系统尺寸的依赖性。数值计算表明 ,不论是二维还是三维铁电系统 ,其铁电畴反转过程中产生的开关电流都随系统尺寸减少而下降 ,开关时间随系统尺寸减少而缩短