Differentiating visual and kinesthetic imagery in mental practice.

Through two experiments, the study sought to emphasize the usefulness of the visual and kinesthetic imagery in mental practice. In Experiment 1, it was hypothesized that when the task to be learned through mental practice necessitates the reproduction of a form by drawing, the visual image, which provides a wide span of apprehension, is more suitable than the kinesthetic image. On the other hand, the kinesthetic image that supplies inputs from the muscles' positions and movements should be more appropriate for the acquisition of the duration of the drawing. In Experiment 2, it was hypothesized that the task, transformed into a motor task necessitating minute coordination of the two hands, would benefit more from kinesthetic imagery. To have optimal control over what was actually experienced during mental practice, the participants' imagery skills were measured. The participants also benefited from prior imagery training. The results demonstrate that when using mental practice to initially acquire a task, visual imagery is better for tasks that emphasize form while kinesthetic imagery is better for those tasks that emphasize timing or minute coordination of the two hands. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Working Memory Capacity and the Antisaccade Task: Individual Differences in Voluntary Saccade Control.

Performance on antisaccade trials requires the inhibition of a prepotent response (i.e., don't look at the flashing cue) and the generation and execution of a correct saccade in the opposite direction. The authors attempted to further specify the role of working memory (WM) span differences in the antisaccade task. They tested high- and low-span individuals on variants of prosaccade and antisaccade trials in which an eye movement is the sole requirement. In 3 experiments, they demonstrated the importance of WM span differences in both suppression of a reflexive saccade and generation of a volitional eye movement. The results support the contention that individual differences in WM span are not exclusively due to differences in inhibition but also reflect differences in directing the focus of attention. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

应用在地下工程施工中的新技术（Ⅱ）

为有效保护地面上的生态环境，开发利用地下空间资源并营建新世纪的地下水城，在新的21世纪里将会建造更多的地下工程以满足人们生产生活的各种需要。文中介绍了地下工程施工中采用的逆作法、盾构法、新奥法、沉管隧道、顶管工程和大型沉井施工新技术，供同行们参考应用。     

外焊缝自动跟踪系统

介绍了外焊缝自动跟踪系统的组成及工作原理，简述了传动部分ＧＴＲ－ＰＷＭ调速系统，给出了系统的硬件电路。该跟踪器具有结构简单，体积小，性能稳定等特点，在生产线上获得了成功的应用。     

涂层材料的断裂分析(英文)

和基体厚度相比,涂层很薄,因此细观力学模型可把基体作为半无限弹性体。由于涂层和基体材料的膨胀系数及弹性系数不匹配,涂层材料中残余热应力的解析解为 E_c/(1-γ_c)·(α_s-α_c)△T。用有限元法校核,该应力和解析解吻合得好。通过对涂层产生裂纹驱动力和断裂韧性的讨论,提出了抗裂涂层厚度公式。     

弱凝胶调驱降维数值模拟方法研究

目前用于弱凝胶调驱的化学驱软件大多存在计算速度慢、数值弥散现象严重的问题,为了提高弱凝胶调驱数值模拟的速度和精度,提出了降低维数的模拟方法。利用追踪流线的方法,将弱凝胶调驱的三维渗流问题,转化为沿流线计算饱和度的一维问题,大大降低了求解饱和度方程组中方程的数目,从而提高了计算速度。利用该方法,模拟了玉门老君庙油田一个试验井区的水驱开发历史,优化了弱凝胶调驱的注入浓度、注入速度及注入体积等参数,并预测了弱凝胶调驱的动态,预测该方案可提高采收率7.6%。     

红外焦平面器件脉冲驱动电路的小型化设计

代表着红外器件发展的主流方向的红外焦平面器件，其正常工作时需要驱动脉冲信号多达十几路，为了使红外焦平面阵列处于最佳工作状态，就必须设计出相应的驱动电路。提出了一种红外焦平面器件驱动电路的设计方法。该电路具有体积小、功率低及灵活性好等特点，为驱动电路以及成像系统的小型化提供了良好的技术基础。     

MOS功率驱动高速脉冲激光器的研究

运用经典电路理论,对MOS功率管的开关特性、驱动原理进行了分析,导出了应用MOS功率管实现高速大电流开关应遵从的原则和方法,并成功地实现了光脉冲上升时间小于5ns、下降时间小于10ns,驱动电流达10～50AP-P激光器电源的要求.     

基于L298N芯片对离子渗氮中压强的控制

离子渗氮工艺对炉体内压强的控制要求比较高，本文设计了一种基于L298N芯片驱动直流电动机控制的气体流量控制器，可用于控制反应炉的抽气气体流量，提高了炉体压强控制精度，降低了生产成本。