荧光染料用于涤纶织物染色的荧光性能研究

在实验条件下，染色织物的荧光反射率随荧光染料的浓度增加而增加，超过一定浓度后，有下降趋势；在pH=5左右，荧光反射率最高；荧光增白剂会提高染色织物的荧光反射率，在荧光黄2GFL中，当荧光增白剂的浓度由0.1％增加到5％时，荧光反射率由8．43增加至18．59，而对非荧光染料只有增艳的作用，不产生荧光。荧光染料染色织物的荧光反射率随着加入非荧光染料量的增加而减弱。     

镁盐对印染废水脱色处理研究

用镁盐对印染工业酸性染料和混合活性染料废水脱色处理。考察了pH值和镁盐添加量等对脱色效果的影响，同时将镁盐和亚铁盐的脱色效果进行了比较。实验结果表明：镁盐具有良好的脱色效果，在镁盐添加量为600mg/L，pH值11．0－11．5的条件下，脱色率达91％以上，说明镁盐是一种安全、无毒、无害的“环境友好型”绿色水处理剂。     

Modeling of solid—liquid adsorption: Effects of adsorbent loads on model parameters

The adsorption of cobalt phthalocyanine dye onto activated carbon in a continuous stirred tank adsorber was studied. The variables investigated were: adsorbent mass, adsorbent particle size and fluid flowrate. Several models based on film, pore and surface diffusion were constructed and fitted to the experimental data. Experimental results showed: (i) the increasing importance of the film mass transfer resistance for increasing adsorbent loads; (ii) the increasing importance of the surface diffusion mechanism for increasing adsorbent loads; and (iii) the better discrimination among different models for higher adsorbent loads and lower flowrate.     

Reactive dye removal in dye/salt mixtures by nanofiltration membranes containing vinylsulphone dyes: effects of feed concentration and cross flow velocity

In this study, DS5 DK type nanofiltration membranes were tested to recycle the reactive dye bath effluents. Reactive black 5 (RB5), reactive orange 16 (RO16), reactive blue 19 (RB19) and NaCl were used in the experiments to prepare the synthetic dye and salt mixtures. Effects of feed concentration, pressure and cross flow velocity on the permeate flux and color removal were investigated. Permeate flux increased with increasing pressure for all NaCl solutions. Dye concentration had a significant effect on flux values. Under the fixed NaCl concentrations the flux decreased with increasing dye concentrations. Dye rejections greater than 99% were achieved. Permeate was almost colorless. A gel layer formed by the rejected dye on membrane surface operates as a resistance to the permeation of dyes due to complete rejection of high molecule weight dyes, especially for the low salt concentrations. The presence of salt concentration has an interesting effect on color removal. Color removal decreased with increasing salt concentration. Cross flow velocities had also a significant effect on flux values. The dye formed agglomerates at high NaCl concentrations. High cross flow velocities decreased this effect.     

超声波/铁-炭微电解耦合处理直接大红4BE染料废水

对超声波/铁-炭微电解耦合处理直接大红4BE染料废水进行了研究。结果表明,超声波与铁-炭微电解耦合可产生协同效应,4BE染料废水的去除率可超过90%,理论分析了协同机理。4BE染料废水的去除过程经历了快反应和慢反应两个阶段,两阶段均符合零级动力学模型,速率常数分别为3.56×10-2nmol/min和3.88×10-3nmol/min。反应主要受到溶液pH的影响,pH为2.4时有利于4BE的去除。     

无隔膜槽中ACF电极成对电解脱色活性艳蓝KN-R

采用恒电流模式,同时以活性炭纤维(ACF)为阳极和阴极,在无隔膜电解槽中研究了不同电流密度下蒽醌染料活性艳蓝KN-R的电化学脱色。结果表明在1.0~1.5mA.cm-2时,电解槽中发生阳极电氧化和阴极电还原同时进行的成对电解脱色。成对电解的发生,可以提高电解槽的工作处理能力。当电流密度为1.1mA.cm-2时,脱色率达到87%。     

改良MEA脱碳技术在小氮厂变换气脱碳中的应用

介绍了改良MEA脱碳技术的基本原理、工艺特点以及在工业中的应用情况，实践表明，改良MEA提高了溶液的吸收能力，降低了再生热耗，解决了MEA易降解损耗等问题。     

Preparation and properties of deep dye fibers from poly(ethylene terephthalate)/SiO2 nanocomposites by in situ polymerization

In this study, poly(ethylene terephthalate) (PET)/SiO₂ nanocomposites were synthesized by in situ polymerization and melt‐spun to fibers. The superfine structure and properties of PET/SiO₂ fibers were studied in detail by means of TEM, DSC, SEM, and a universal tensile machine. According to the TEM, SiO₂ nanoparticles were well dispersed in the PET matrix at a size level of 10–20 nm. The DSC results indicated that the SiO₂ nanoparticles might act as a marked nucleating agent promoting the crystallization of the PET matrix from melt but which inhibited the crystallization from the glassy state, owing to the “crosslink” interaction between the PET and SiO₂ nanoparticles. The tensile strength of 5.73 MPa was obtained for the fiber from PET/0.1 wt % SiO₂, which was 17% higher than that of the pure PET. The fibers were treated with aqueous NaOH. SEM photographs showed that more and deeper pits were introduced onto PET fibers, which provided shortcuts for disperse dye and diffused the reflection to a great extent. According to the K/S values, the color strength of the dyeing increased with increasing SiO₂ content. It is found that the deep dyeability of PET fibers was improved greatly. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

近红外吸收功能染料的合成

以缩合剂1，5-二苯胺-戊-1，3-二烯盐酸化物与1，3，3，5-四甲基-2-亚甲基吲哚啉为主要原料合成了1，3，3．5，1’，3’，3’，5'-八甲基吲哚三碳菁近红外吸收染料，收率达61．5％，采用熔点测定、元素分析、IR验证了产品的结构。通过电子吸收光谱测得其最大吸收波长为760nm。     

某些硫碳菁染料在溴碘化银乳剂中聚集态的研究

本文应用三种不同晶形的溴碘化银乳剂(立方体、八面体和T-颗粒)和八种硫碳菁染料(大部分为内铵盐结构染料)进行了染料的聚集态的研究。试验结果表明,染料的J-聚集态的形成主要取决于染料的结构,其次依赖于卤化银的晶形。三种不同结构的表面活性剂对染料聚集态的形成均有影响,其中两性的表面活性剂最强,阴离子的表面活性剂次之,中性的表面活性剂最弱。二种中位甲基取代的硫碳菁染料的聚集态受表面活性剂影响最为明显,形成较强的J-态,而对其它六种染料的聚集态影响较小,J-聚集态稍有增强。