A polynomial dynamic system approach to software design for attractivity requirement

Because of the widespread increasing application of Web services and autonomic computing, self-adaptive software is an area gaining increasing importance. Control theory provides a theoretical foundation for self-adaptive software. In this paper, we propose the use of the supervisory control theory of discrete event dynamic systems (DEDS) to provide a rigorous foundation for designing software for reactive systems. This paper focuses in particular on design of software with an attractivity requirement. It studies this problem using the polynomial dynamic system (PDS) model of DEDS. A necessary and sufficient condition for software existence and two algorithms for such software design are presented.     

起落架落震试验飞机机轮三向冲击位移的动态测量

为了研究飞机起落架受冲击载荷时的功量吸收状况，须在起落架落震试验中，对飞机着陆瞬间起落架机轮在空间三个方向上冲击位移的动态变化量进行测量。为此，本文设计了四自由度空间定位装置，并使其与计算机连接，实现了落震试验过程中，起落架在高速冲击状态下机轮三向位移的有效测量与记录。     

厦门市气源转换的技术分析

分析了气源转换时原有输配系统的管道、调压设备、计量设备、用气设备与天然气系统相适应的问题，提出了相应的措施。     

Prediction of the effects on dynamic response due to distributed structural modification with additional degrees of freedom

The aim of this study is to investigate means of efficiently assessing the effects of distributed structural modification on the dynamic properties of a complex structure. The dynamic properties of the modified structure can be determined by experimental testing or numerical simulation, both of which are complex, expensive and time-consuming. Assuming that the original dynamic characteristics are already established and that the modification is a relatively simple attachment, the modified dynamic properties may be determined numerically without solving the equations of motion of the full-modified structure. The frequency response functions (FRFs) of the modified structure can be computed by coupling the original FRFs and a delta dynamic stiffness matrix for the modification introduced. The validity of this approach is investigated by applying it to a cantilever beam to which a smaller beam is attached as modification. The original FRFs were obtained experimentally as well as numerically. The delta dynamic stiffness matrix was determined numerically by modeling the attachment and part of the original structure including the attachment points. The FRFs of the modified beam were then computed. Good agreement is obtained by comparing the results to the FRFs of the modified beam determined experimentally as well as by numerical modeling of the complete modified structure.     

Dynamic averaging and foraging decisions in horses (Equus callabus).

The variability of most environments taxes foraging decisions by increasing the uncertainty of the information available. One solution to the problem is to use dynamic averaging, as do some granivores and carnivores. Arguably, the same strategy could be useful for grazing herbivores, even though their food renews and is more homogeneously distributed. Horses (Equus callabus) were given choices between variable patches after short or long delays. When patch information was current, horses returned to the patch that was recently best, whereas those without current information matched choices to the long-term average values of the patches. These results demonstrate that a grazing species uses dynamic averaging and indicate that, like granivores and carnivores, they can use temporal weighting to optimize foraging decisions. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

基于GPS的高层建筑环境激励动态特性研究及应用

本文结合重庆大学主教学楼工程实例,对GPS技术在环境激励下的动态特性进行监控的情况进行了分析和论述。研究结果表明,在高层建筑施工中,应用GPS技术进行建筑物环境激励动态特性监控是一种行之有效的方法。     

南桐矿区龙潭煤系热演化及煤变质研究

川东地区二叠系龙潭煤系煤变质分带与褶皱关系密切，背斜部位变质浅，向斜部位变质深，且变化急剧．在对南桐矿区重点研究的基础上，用沉积速率比值法和沉积趋势法恢复了川东地区各时期的沉积厚度以及褶皱运动前后龙潭煤系的热演化史，并用Ｈｏｏｄ法确定了煤变质阶段，对川东的煤变质规律作出了合理的解释。     

利用Love波特性计算地基动力响应

本文利用Love波弥散特性在频域上对地基出平面振动及扭振问题进行了研究。在计算区域内结构将采用有限单元划分,而在边界上则根据Love 面波特性使用传递边界有限单元。本文同时讨论了不同模态波对结构动力响应的贡献。本文方法也适合于静力分析。     

等温脉冲自由射流压力场动态特性的实验研究

针对冶金工业过程脉冲燃烧及脉冲流技术所进行研究的基础部分,借助于计算机辅助信号分析手段,运用湍流统计理论,对等温脉冲自由射流压力场动态特性进行了系统的实验研究。实验的Re范围为19486～93936,st范围为0～0.057,所对应的射流脉冲频率为0～25Hz。研究结果表明;脉冲射流极大地提高了射流区压力波动水平,任何受气体的动量、热量和质量传递制约的工业过程均可望通过适当地采用脉冲流技术加以强化.     

Frequency response function of magnetic bearings using high-temperature superconductor

A high-temperature superconductor YBa₂Cu₃O_7-x with strong pinning force has allowed stable magnetic suspension with no control to be developed. Two types of superconducting magnetic bearings (SMB) using YBCO and permanent magnet were assembled. The two types are radial and axial. The dynamic stiffness of each SMB as it was cooled down under a magnetic field by liquid nitrogen was measured both radially and axially. As a result, it was found that the spring constants of these SMBs were almost as large as a practically desirable value; however, their damping coefficients were lower than the practical level. These findings are useful as one of the data bases for development of an optimum SMB design to support the weight of rotors in an axial direction.