Alkylated ureas: mineralization and evaluation as N sources

An incubation experiment was conducted for 11 weeks to study the mineralization of ten alkylated ureas and urea in soil. Six of the alkylated ureas viz. methylurea(MU), 1,3-dimethylurea(1,3DMU), 1,1-dimethylurea(1,1DMU), ethylurea(EU), 1,3-diethylurea(1,3DEU) and butylurea(BU) and urea mineralized during the experiment. Urea mineralized immediately, while alkylated ureas mineralized after an incubation period ranging from less than a week to four weeks (delay period of mineralization). The delay period increased in the following sequence MU < 1,3DMU < EU < BU < 1,1DMU < 1,3DEU, but after the delay period was over the compounds mineralized almost as rapidly as urea. The delay period varied according to the number of carbon atoms in the alkyl group and their position with respect to each other on the molecule. It appeared to be specific for each compound and was apparently not influenced by the presence of urea or other alkylated ureas. This character can be used to develop mixture of various alkylated ureas to obtain N mineralization at the desired time. Rapid evolution of CO₂ and N₂O was observed during the mineralization of urea as well as alkylated ureas. Increase in soil pH was also observed during this period. The simultaneous ocurrence of these events suggested the formation of urea as an intermediate during the mieralization of alkylated ureas. None of the alkylated ureas showed adverse affect on emergence of wheat seedlings and except DEU and BU at high concentration no other alkylated urea showed any adverse effect on initial growth of wheat seedlings.     

动态信号分析系统的进展及应用

本文综述了动态信号分析仪器与系统的发展,并综合介绍了双通道动态信号分析仪的构成、性能与指标,以及由动态测量、数据采集、信号处理等硬件与相应软件组成的多通道动态信号分析系统的进展.     

奇异值分解对非定常约束多体系统的动力学分析

通过对约束方程的雅可比矩阵进行奇异值分解，定义组合坐标，从拉格朗日第一类方程出发，建立了非定常约束多体系统的纯微分方程，给出了动力学数值分析的过程，最后举了一个算例。     

动载荷下应力强度因子的边界元计算

用Ｎａｒｄｉｎｉ－Ｂｒｅｂｂｉａ边界元法计算了动载荷下的应力强度因子，与解析解及有限元解相比较，效果较好。最后对计算结果进行了分析讨论。     

SiH4＋CH4激光等离子体动力学时空特性

采用时间，空间分辨的等离子体光辐射诊断技术，研究了脉冲ＴＥＡＣＯ２激光诱发ＳｉＨ４＋ＣＨ４击穿产生的等离子体膨胀过程，得到不同空间位置，不同实验条件下等离子体发光的时间特性，证明了ＳｉＨ４＋ＣＨ４气体击穿产生爆燃波而后诱发激波是等离子体中基本宏观动力学过程，并在实验上分析了激波对等离体内化学反应的影响，为激光等离子体合成ＳｉＣ粉末微观反应动力学过程的研究提供了参考数据。     

动态交联热塑性弹性体增韧聚丙烯合金

用动态交联方法制备聚烯烃热塑性弹性体（ＴＰＯ）增韧聚丙烯，制备了具有低温冲击性能良好、综合力学性能比较均衡的聚丙烯合金。同时，研究了ＴＰＯ组成、工艺及基体组成与ＴＰＯ增韧聚丙烯共混物力学性能的关系。并通过差热扫描量热计和扫描电镜考察了共混物的形态结构。     

气体动压轴承动态参数测定原理

将气体动压轴压简化为转化气膜系统后，针对其动力特点，给出气膜在微幅振动下动压轴承的实用数学模型和测定动态参数的方法，并进行了测量误差的修正。     

A three-dimensional measurement system for robot applications

This paper presents a 3D noncontacting sensor system designed to measure the position and orientation of a robot end effector. This measurement system includes two parts: a tridimensional object including four spheres placed along the axes of a tetrahedron and a set of three orthogonally pointed cameras. The purpose is to design a measurement system characterized by easy relationships in order to satisfy real-time constraints. The system has been used in two experiments: first, to calibrate a parallel robot and validate the geometrical control performance, then as an exteroceptive sensor in an assembly task. The system computes position and orientation of the tetrahedron in 100 ms time. The position and orientation accuracy are, respectively, 0.6 mm and 0.2 deg in a workspace, being a cube with 0.3 m sides.     

原油换热网络Simulink动态仿真中提高运行速度的问题

提出状态空间离散化的思想,建立换热器的动态机理模型,然后通过Simulink模块化进行连接,对换热网络进行动态仿真。在大规模原油换热网络的仿真中,采用存储初值和切断代数环的方法,使换热网络的收敛速度得到了很大的提高,为复杂换热网络的动态仿真和实时优化打下了基础。这种方法,还可适用于一般石油化工过程装置的大规模动态仿真运行中。     

大型立式玻璃磨边机整机动态特性分析

大型立式玻璃磨边机的动态特性影响玻璃磨边质量和磨边效率。利用Solidworks软件建立某大型立式玻璃磨边机三维实体模型,导入ANSYS软件中,对整机结构有限元动力学分析,得到该磨边机前六阶模态参数,分析了各阶振型对磨边机动态特性的影响,为磨边机结构的改进设计提供了理论依据。