考虑加/卸载速率影响的Ti-Ni形状记忆合金简化本构模型

系统研究了Ti-Ni形状记忆合金丝(SMA)应力-应变曲线、特征点应力、耗能能力、等效阻尼比随材料直径、应变幅值、加载速率、加载循环次数的变化规律;针对SMA唯象Brinson本构模型无法描述SMA动态力学性能的缺点,结合前述试验结果,提出了一种可考虑加/卸载速率影响的SMA简化本构模型。应用该模型对试验用SMA丝进行模拟,所得应力-应变曲线各特征点平均误差仅为3%,结果表明:所建立的速率相关SMA简化本构模型可较为精确地描述SMA在应力诱发相变过程中的超弹性力学行为,同时可反映加/卸载速率和应变幅值等主要因素对其动力本构模型的影响;该模型结构形式简单,具有较好的工程应用前景。     

陶瓷中空纤维内表面动态水热合成NaA分子筛膜及其表征

采用动态水热法在氧化铝陶瓷中空纤维内表面原位合成了NaA分子筛膜。利用X射线衍射仪(XRD)、场发射扫描电子显微镜(FE-SEM)表征了分子筛膜的物相及微观形貌,通过渗透汽化测试考察了膜的乙醇/水分离性能,研究了合成工艺参数对成膜过程及膜质量的影响。结果表明,动态下合成的分子筛膜,晶体交联紧致,膜层薄且连续性好,厚度约4μm;提高动态速度有利于降低载体内外合成液的温差和浓度差,缩短晶化时间。在温度343K下,分离质量分数90%的乙醇/水体系,膜的渗透通量和分离因子可达1.03kg/(m2·h)和3 781,对乙醇/水表现出良好的分离效果和可重复性。     

灰岩和白云岩动态压缩力学性能的SHPB实验

为了得到爆破荷载作用下岩石的破坏特性及爆破振动波的传播特性,利用RMT-150C多功能实验机和改进后的ф50mm的分离式Hopkinson压杆装置,分别研究灰岩和白云岩试件的静态力学特性和在5种不同应变率等级下的动态力学性能。实验结果表明,随着平均应变率的增加,灰岩和白云岩试件的动态抗压强度、峰值应变、吸收能、比能量吸收值以及破碎程度都明显增加,表现出显著的应变率效应,而初始弹性模量对应变率的相关性不敏感。从岩石的动态抗压强度和能量吸收两个方面,对比分析灰岩和白云岩动态力学性能的共性和差异性,更合理地解释了岩石在动态冲击荷载下的破坏本质。     

Evaluation of rutting potential for asphalt concrete mixes containing copper slag

Copper slag (CS) is a by-product of the copper extraction process, which can be used as coarse and/or fine aggregate in hot mix asphalt (HMA) pavements. This study used CS as a replacement of the fine aggregate with a percentage of up to 40% by total aggregate weight. The objective of this study was to evaluate the effect of CS on the rutting potential of the asphalt concrete mix using two methods. One method is based on the Dynamic modulus |E*| testing result. Actual pavement temperature data from a test section were used with the developed |E*| master curves. EverStressFE finite element program was used to perform a linear elastic load-deformation analysis for a pavement section and to determine the vertical resilient strain in a 40-mm HMA surface layer. The M-E PDG permanent deformation model was used with and Excel Visual Basic for Applications code to predict the accumulated rutting for different CS mixes for 10 million ESALs. The other method used the data from the flow number (FN) test. Based on the |E*| approach, the results indicated that adding 5% CS in the mix increased the predicted rutting from 0.59 to 0.98 mm at 10 million ESALs (increase by 68%). When 40% CS was used, rutting increased by more than 700% compared with the control mix. After analysing the FN results with the Francken model, the results indicated a decrease in FN as CS content is increased, indicating higher rutting potential. The decrease in FN ranged from 9% for 5% CS to 95% for 40% CS. The mixes containing up to 10% CS satisfied the minimum FN criteria for rutting. A calibration process for the M-E PDG distress prediction models that allows the use of waste and by-product materials such as CS should be considered in the future.     

Light‐Activated,Multi‐Semiconductor Hybrid Microswimmers

Using a dynamic fabrication process, hybrid, photoactivated microswimmers made from two different semiconductors, titanium dioxide (TiO₂) and cuprous oxide (Cu₂O) are developed, where each material occupies a distinct portion of the multiconstituent particles. Structured light‐activated microswimmers made from only TiO₂ or Cu₂O are observed to be driven in hydrogen peroxide and water most vigorously under UV or blue light, respectively, whereas hybrid structures made from both of these materials exhibit wavelength‐dependent modes of motion due to the disparate responses of each photocatalyst. It is also found that the hybrid particles are activated in water alone, a behavior which is not observed in those made from a single semiconductor, and thus, the system may open up a new class of fuel‐free photoactive colloids that take advantage of semiconductor heterojunctions. The TiO₂/Cu₂O hybrid microswimmer presented here is but an example of a broader method for inducing different modes of motion in a single light‐activated particle, which is not limited to the specific geometries and materials presented in this study.     

热压缩过程中2205双相不锈钢的组织演变和软化机制

在不同变形温度和应变速率条件下对2205双相不锈钢进行高温压缩实验,研究了变形温度、应变速率和变形量对其显微组织中铁素体和奥氏体两相的影响,分析了高温变形软化机制。结果表明：随着变形温度的提高这种钢的峰值应力及其对应的应变逐渐减小。随着变形温度从850℃提高到950℃,2205双相不锈钢显微组织中的铁素体向奥氏体的转变占主导地位;变形温度高于950℃时,随着变形温度的提高铁素体与奥氏体之间的强度水平之差逐渐减小,显微组织中的奥氏体向铁素体的转变占主导地位。在本文的热变形条件下2205双相不锈钢的显微组织中铁素体呈现出与奥氏体不同的软化机制,铁素体的软化机制为动态回复和动态再结晶,而奥氏体因层错能较低其软化只能通过有限程度的动态回复进行。     

频闪白光干涉技术

频闪白光干涉技术（SWLI）能够对被测系统进行动态模式的重建和表征,在微机电系统（MEMS）或微光机电系统（MOEMS）等振动样品测量中具有很高的实用性。传统频闪方法不能预先检测或分析具有单个振动激励源的微结构,而频闪白光干涉技术则解决了这一问题。为了全面了解这一新开发的技术,本文介绍了理论、技术方法和该技术各种应用的实验结果及分析。该技术为MEMS、MOEMS甚至微纳尺度生物体动态行为的重建和分析提供了一种有效的方法。实验结果和分析表明所开发的技术在实际应用中具有良好的可行性和准确性。     

可伸缩复合材料悬臂梁的非线性动力学建模及分析

首先,根据Reddy给出的考虑高阶剪切效应的层合理论,气动弹性活塞理论,利用Hamilton原理,对考虑采用基于活塞理论的一阶非线性气动力和面内参数激励的联合作用下的轴向可伸缩复合材料悬臂梁进行非线性动力学进行建模,得到其偏微分动力学控制方程.然后对控制方程无量纲化,利用Galerkin方法对控制方程进行了截断,得到三个可反映可伸缩悬臂梁横向振动的无量纲形式的常微分非线性动力学方程,只要选取适合的复合材料及其相关参数,使用数值方法就对模型在外伸和回收过程中的相关振动特性进行了分析.     

基于粒子群优化算法的船舶动力定位云模型控制器设计

云模型控制理论是智能控制学科的新兴领域,因此如何扩展云模型的应用范围并使其走向工程化和实用化成为其研究重点;针对船舶运动模型具有不确定性和外部扰动随机性等特点,尝试将云模型应用于船舶动力定位的控制过程中;由于云模型控制器存在参数难以整定的问题,提出了基于粒子群算法的优化设计方法;针对标准粒子群优化算法容易出现早熟收敛的问题,引入自适应粒子群优化算法;仿真研究表明云模型控制及粒子群优化的可行性和有效性。