双机架可逆冷轧机张力控制系统的研究

文章针对双机架可逆冷轧机的特点和轧制工艺要求,采用间接张力与直接张力复合控制法以实现卷取恒张力控制;提出了机架间张力控制系统的组成,描述了两种调张法的控制原理与实现方法.     

基于FLANN的动态称重法

根据“逆模型”的思想 ,利用神经元网络良好的逼近能力 ,基于函数联接型神经网络 ( FLANN)的传感器动态补偿方法和最小二乘法 ,提出了一种车辆动态称重解决新方法     

基于多EBP网的案例匹配技术研究

为快速有效地实现案例推理，提出了基于多EBP神经网的案例匹配技术，设计了改进的德尔菲法来确定输出样本集．与传统的最邻近法的结果相比，对于复杂系统，该技术能够提高案例匹配的精确性，更适于解决案例属性权重难以确定或存在着耦合与非线性关系的问题．     

On the Transition from a Model to a Real Solid in the Course of Photoelastic Simulation of Problems of the Mechanics of Orthotropic Solids

We propose a method for the recalculation of dynamic stresses from a photoelastic model to a real solid in plane problems of the mechanics of orthotropic bodies. To estimate the accuracy of the method, we recalculate stresses for a problem with known theoretical solution.     

Generalized Deformation Curve for High-Strength Steel over a Wide Range of Strain Rates

Test results for different high-strength steel specimens in static and impact tension and compression over a wide range of strain rates were summarized. These data were used to calculate the generalized deformation curve. The calculations based on this curve were compared with the experimental data on impact indentation with the conical indenter to evaluate the applicability of this method for studying the behavior of metals at high strain rates.     

An Analytical Equation of State for Alkaline Earth Metals

In this work, an analytical equation of state based on statistical mechanical perturbation theory, which was initially developed for normal fluids and can be applied to predict the P–V–T data for saturated liquid alkaline earth metals, is presented. The equation of state is that of Ihm, Song, and Mason, and the temperature-dependent parameters of the equation of state are calculated from a corresponding-states correlation as functions of the reduced temperature. Two scaling constants are sufficient for this purpose, the surface tension and the liquid density at the melting point. The equation of state is used to predict the saturated liquid density of molten alkaline earth metals from the melting point up to 2000 K, for which experimental data exist, within an accuracy of 5%.     

基于固定参数轨道的动态精密解算精度

为了验证动态精密解算在地震等连续运动平台中的应用效果,使用采样率为1 Hz的双频GPS接收机,并利用参数已知的轨道进行了动态模拟实验.以地震模拟动态平台进行实验,并利用GAMIT软件中的Track模块进行实验分析,通过对GPS数据的精密处理及对不同距离基准站数据的分析,得到了运动轨道图.结果表明:Track模块可使测量点的水平和垂直方向解算精度达到毫米级,说明此种解算方法适合在实际动态测量中进行应用,可以用来反演在地震发生时的地表动态变化情况.     

预应力砼井字梁结构测试分析

在预应力双向网格井字梁屋盖施工中，对井字梁的预应力摩擦损失、锚具变形、钢筋内缩、弹性压缩和反拱及挠度进行了实测，以检验梁中建立的有效预应力能否达到设计要求，并与理论值进行比较。     

动态有限单元法对摩托车刚架的动力分析

本文采用了各阶动态约束模态函数而组成的平面刚架结构有限单元的各阶动态形函数矩阵及各阶单元特性表达式,利用它们可以准确地计算出摩托车的各阶动特性,进而可求出在各种载荷下的各阶动位移与动应力分量,最后将各阶动应力分量迭加,即可准确地求出动位移及动应力响应。无疑这对摩托车的优化设计是十分有意义的。     

Frequency-dependent dynamic effective properties of porous materials

The frequency-dependent dynamic effective properties (phase velocity, attenuation and elastic modulus) of porous materials are studied numerically. The coherent plane longitudinal and shear wave equations, which are obtained by averaging on the multiple scattering fields, are used to evaluate the frequency-dependent dynamic effective properties of a porous material. It is found that the prediction of the dynamic effective properties includes the size effects of voids which are not included in most prediction of the traditional static effective properties. The prediction of the dynamic effective elastic modulus at a relatively low frequency range is compared with that of the traditional static effective elastic modulus, and the dynamic effective elastic modulus is found to be very close to the Hashin-Shtrikman upper bound.