提高硬质合金工具使用寿命的研究

通过改变硬质合金剩余应力类型和状态，改善了硬质合金的性能，提高了硬质合金工具的使用寿命。     

条形药包爆炸应力场试验研究

应用动态光弹性模型试验方法研究了条形药包的爆炸应力场分布特性。研究结果表明：起爆方式和位置影响着条形药包爆炸应力场的分布形态，并首次成功地记录了条形药包瞬间爆炸应力场的动光弹条纹，得到了理想成力场的分布形式。     

动载荷下应力强度因子的边界元计算

用Ｎａｒｄｉｎｉ－Ｂｒｅｂｂｉａ边界元法计算了动载荷下的应力强度因子，与解析解及有限元解相比较，效果较好。最后对计算结果进行了分析讨论。     

膨胀弯管在管道柔性设计中的定性分析

为防止管道因热胀冷缩、管道支撑或端点附加位移造成的应力问题,对管线中设置的膨胀弯管进行定性分析.通过2个参数的变化对膨胀弯管进行编号得到多种设计方案,用ANSYS建立管道的有限元模型,并分析各方案中膨胀管道的变形、应力和弯矩等;根据分析结果对膨胀弯管设计半径、设置位置和形状进行定性分析.该定性分析结果可为膨胀弯管概念设计和管道柔性设计提供参考.     

基于中值滤波和梯度锐化的边缘检测

实现一种基于中值滤波和梯度锐化的边缘检测方法。首先采用既能过滤噪声又能保护边缘信息的中值滤波对图像进行平滑处理。然后采用梯度锐化加强边缘像素强度,通过简单的二值化获得图像的初始边缘,系统采用连通区域标记的方法去除位于图像封闭边界内的残留黑块。最后通过实验结果与人工提取的结果比较,进行误差分析,找出本文算法的不足之处,以便对该算法进行改进。实践证明,本文的边缘检测方法对含有噪声点且灰度分布比较均匀的图像有很好的效果。     

The impact of risk and protective factors on online teaching experience in high school Italian teachers during the COVID-19 pandemic

The lockdown due to COVID-19 in Italy resulted in the sudden closure of schools, with a shift from traditional teaching to the online one. Through an online questionnaire, this survey explores teachers' experience of online teaching, the level of risk factors (e.g., stress) and protective factors (e.g., locus of control) and their impact on satisfaction levels during the social distancing. One hundred seven high school teachers from Lombardy, an Italian region very affected by the COVID-19 outbreak, participated. Results show that depression and stress are the main predictors of satisfaction levels for online teaching. In addition, coping, locus of control and self-efficacy emerge as important protective factors. Finally, although there is great satisfaction with the online teaching experience, critical elements emerged. This study is relevant because it describes the critical elements of the online teaching experience, and identifies some protective factors and the main risk factors in teachers operating in an area strongly marked by social restrictions imposed by the pandemic. High school teachers emerge as a sub-group of the general population with specific psychological reactions. Considering the results, it is possible to suggest providing high-quality educational support and crisis-psychological oriented services to teachers, and help to maintain the psychological well-being.     

AN EXPERIMENTAL-NUMERICAL METHOD FOR MEASURING CRACK PROPAGATING VELOCITIES UNDER STRESS WAVE LOADING

An experimental-numerical method for measuring dynamic crack propagating velocities under stress wave loading is established in this paper. The experiments of the three-point bend specimen are done on the improved Hopkinson bar. Deflection of loading point, dynamic load and instantaneous crack length are measured, then crack propagating velocities are calculated. Experiments on 40Cr steel show that the results given by this method have a good agreement with that obtained by the resistance fracture gage method. Therefore this method is feasible for measuring crack propagating velocities under high loading rate and will have wide application.     

基于邻域彩色变化矢量场的图像边缘检测技术研究*

首先进行了边缘检测系统结构设计,建立了图像邻域彩色变化矢量场的数理模型,提出了用图像邻域彩色变化方向锐度描述图像边缘,进而应用模糊聚类自适应检测边缘.实验表明:与基于梯度的边缘检测技术相比,该方法在噪声抑制以及边缘准确定位上均取得了好的效果,是一种应用广泛的优秀边缘检测算法.     

Q390高强抗震钢板残余应力检测方法对比及分析

利用盲孔法、X-Ray法、中子衍射法和超声法对Q390高强抗震板及U形弯曲件进行残余应力检测,并对这4种方法测试得到的应力结果进行分析研究。结果表明,以上4种检测方法均要考虑其特定的检测应用范围,X-Ray法针对钢板表面下微米级深度的微米级晶格尺度范围局部点应力进行检测,中子衍射法可在毫米级尺度局部区域进行应力检测,盲孔法反映的是因毫米尺度钻孔导致的钢板表面孔周边的应力变化,超声法则可以通过连续扫描检测整个钢板残余应力的宏观分布变化。因此,对于工业钢板,超声法测试残余应力更加科学、合理、准确。同时,通过U形试样建立稳定的应力应变场,利用超声设备使用不同参考态对Q390高强抗震板弯曲件及退火弯曲件进行测试,结果表明,测试参考态的选取对应力测试结果影响很大,材料各向异性的影响对应力测试结果不可忽视。     

Characterization of blasted austenitic stainless steel and its corrosion resistance

It is known that the corrosion resistance of stainless steel is deteriorated by blasting, but the reason for this deterioration is not clear. A blasted austenitic stainless steel plate (JIS-SUS304) has been characterized with comparison to the scraped and non-blasted specimens. The surface roughness of the blasted specimen is larger than that of materials finished with #180 paper. A martensite phase is formed in the surface layer of both blasted and scraped specimens. Compressive residual stress is generated in the blasted specimen and the maximum residual stress is formed at 50–100 μm from the surface. The corrosion potentials of the blasted specimen and subsequently solution treated specimen are lower than that of the non-blasted specimen. The passivation current densities of the blasted specimens are higher those of the non-blasted specimen. The blasted specimen and the subsequently solution treated specimen exhibit rust in 5% sodium chloride (NaCl) solution, while the non-blasted specimen and ground specimen do not rust in the solution. It is concluded that the deterioration of corrosion resistance of austenitic stainless steel through blasting is caused by the roughed morphology of the surface.