基于粒子群三次样条优化的图像边缘描述算法

针对手工选点生成的三次样条曲线无法准确地描述图像边缘的问题,以粒子群三次参数样条曲线优化算法为基础对现有的图像边缘算法进行了改进。在图像边缘上取若干点作为样条曲线的型值点,利用粒子群算法对这些型值点进行优化,使得到的样条曲线对图像边缘有很好的贴合。实验表明,该算法不仅能够快速拟合样条曲线,而且优化后的样条曲线形态能较好地贴合图像边缘轮廓。     

Zernike矩结合Sigmoid曲线拟合边缘检测方法

为了改进Zernike矩边缘检测方法对非直线边缘检测精度低的弱点,提出了一种改进的基于Zernike矩方法和Sigmoid拟合法的边缘检测方法。用Zernike矩边缘检测方法检测边缘,然后用Sigmoid拟合方法检测边缘,根据边缘类型对两种方法检测的边缘结果进行加权求和,所得结果为边缘位置。分别利用理想图像和实际工业CT图像进行了实验验证,实验结果表明对非直线边缘的检测,该方法检测精度相对于Zernike矩方法提高了一个数量级。     

基于敲击声振法的风机叶片脱层检测系统设计

脱层是风机叶片的主要损伤形式,根据风电叶片的材料特性及外形特点,分析和研究了敲击声振检测原理和现场检测的可行性。叶片出现脱层时,缺陷处刚度下降,敲击应力持续时间增大。依据此检测原理,计算出合理的等效锤头质量,利用压电薄膜作为动态冲击力传感器进行了力锤的结构设计;利用FPGA设计了便携式检测仪,对敲击信号进行信息提取和处理,计算敲击力脉冲信号的宽度,具有结果图形显示和串行通信的功能。经过实验,验证了脉冲宽度与损伤深度的关系。     

应力型微悬臂梁生化传感器响应机理研究进展

针对静态微悬臂梁表面特异性结合产生表面应力信号的响应机制问题,介绍了微悬臂梁生化传感器的工作原理,阐述了应力响应机制的简化模型,从纵向界面上和横向分子间2个方面对特异性吸附引起的悬臂梁表面应力的变化进行了剖析,讨论了界面能变化、位阻作用、静电力、氢键作用等与表面应力大小及方向之间的关系,总结了应力型微悬臂梁生化传感器的响应机理的研究。     

冷却器盘管失效分析及防范措施

本文介绍了冷却器盘管破裂泄漏的情况，分析了失效破坏的原因，并提出防止冷却器盘管破裂泄漏的措施。     

对边缘不突出的显微镜影像进行边缘特征提取与Hough直线检测

文章主要介绍如何对边缘不突出的显微镜进行边缘特征提取与Hough直线检测,其中涉及到数字图像处理中的边缘检测、图像二值化及Hough直线检测算法。     

MgO／Ni系梯度功能材料的设计与制备

对ＭｇＯ／Ｎｉ系梯度功能材料（ＦＧＭ），分别用实验和微观力学模型测定和计算了用于热应力缓和设计的各物性参数。讨论了两种结果之间存在差异的原因。用有限元方法模拟了制备过程中ＦＧＭ的热应力，得到ＭｇＯ／Ｎｉ系ＦＧＭ的综合设计准则。按设计结果进一步调整粉末工艺性质，成功地烧制出ＭｇＯ／Ｎｉ系ＦＧＭ。     

Slow stable crack growth in high density polyethylenes

The phenomenon of slow stable crack growth in polyethylene is investigated using notched specimens subject to constant load and the concepts of fracture mechanics. The effect of specimen geometry and dimension, the loading and the mode of loading on the applied stress intensity factor versus crack speed ($\text{K}{}_{\mathrm{c}}\text{-}\text{a}\text{?}$) curves has been studied to demonstrate that K_c is the controlling stress parameter for crack growth under suitable conditions. $\text{K}{}_{\mathrm{c}}\text{-}\text{a}\text{?}$ curves are obtained for a high density polyethylene homopolymer in distilled water and in a diluted detergent solution at four different temperatures. Results are also obtained for a much tougher medium density polyethylene copolymer whenever possible. Several mechanisms can be identified from the form of the $\text{K}{}_{\mathrm{c}}\text{-}\text{a}\text{?}$ curves. Two, in particular, have been observed but not explained before: (i) crack growth with a time dependence of 0.25, and (ii) the high $\text{K}{}_{\mathrm{c}}\text{-}\text{a}\text{?}$ slopes for crack growth in a tough copolymer. With the help of scanning electron microscopic studies of the fracture surfaces, (i) is postulated to be due to diffusion controlled void growth process and (ii) is considered to be the result of crack tip blunting effects. From the temperature dependence of crack growth, the activation energy of the diffusion controlled crack growth process is found to coincide with that of the x-relaxation process in polyethylene implying that diffusion controlled crack growth may be related to the motion of main chains in the polymer.     

Switch on to games: Can digital games aid post-work recovery?

Recovery is a necessary factor in avoiding work-related strain and in feeling prepared for the next day of work. In order for recovery to be successful, an individual must experience psychological detachment from work, relaxation, mastery experiences and a sense of control, all of which have been argued to be assisted by digital game use. However, it is unclear whether these associations will be greater for certain digital game genres, or whether this would extend to other recovery-related outcomes, for instance work home interference (WHI), where the stress from work interferes with home-life. These factors may be vital in determining whether interventions aimed at improving recovery using digital games would be effective, and what form these should take. The present research surveyed 491 participants and found that the total number of hours spent playing digital games per week was positively correlated with overall recovery. Correlations varied with genre, highlighting the importance of game characteristics in this relationship: first person shooters and action games were most highly correlated with recovery. Moreover, digital game use was not related to a reduction in work–home interference. When restricting the analysis to gamers who report to have developed online relationships, online social support mediated the relationship between digital game use and recovery. Results are discussed in terms of how digital games may be utilised to improve recovery and reduce work-related stress.     

Creep and Creep Fracture in Hot-Pressed Alumina

The creep and creep fracture behavior of two hot-pressed aluminas are presented, for both flexural and tensile testing. Steady-state power-law creep is observed with a stress exponent of about 2 for each material. Three distinct fracture regimes are found. At high stress in flexure, fracture occurs by slow crack growth with a high stress dependence of the failure time. At intermediate stresses, in both flexure and tension, creep fracture occurs by multiple microcracking after modest strains. Failure times exhibit a modest stress dependence (stress exponent of 2.5 in tension and 3 in flexure), with a constant failure strain equal to 0.09. The failure times are considerably longer in flexure than in tension, because of the constraint imposed on crack growth by the bending geometry. We conclude that flexure cannot be used for creep lifetime assessment, even in simple, single-phase materials such as Al₂O₃. At low stresses, in tension, failure also exhibits a modest stress dependence but with a much higher failure strain. The material shows the onset of super-plastic behavior.