爆炸预处理提高D级船板(WD钢)模拟CGHAZ韧性的研究

运用示波冲击和维氏硬度试验、扫描电镜断口和电子探针能谱分析、图象仪测定等手段研究了爆炸预处理对WD钢模拟CGHAZ韧性的影响，发现爆炸预处理具有显著提高WD钢大线能量(50kJ／cm)模拟CGHAZ韧性的效果，提高幅度达118％，其原因在于细化原奥氏体晶粒，生成了较多的先共析多边铁素体，软化了组织。     

成品油储罐内的腐蚀及防护

对成品油储罐内各部位腐蚀情况进行了介绍，说明了产生腐蚀的原因和腐蚀机理。介绍了油罐内防护技术，采用节点加固，降低边缘应力，可减缓油罐金属腐蚀速度；对选用油罐内防腐涂料的原则进行了阐述。     

差动光栅在精密测试中的应用

提出差动光栅概念,举例说明差动光栅在光纤面板刀口响应测试和材料形变自动监测系统等精密测试中的应用。     

形态学边缘检测的新算法及其应用

提出了一种基于数学形态学的边缘检测的所算法，该算法具有简便和灵活可编程控制等优点，比原来主算法更国完善，在实际应用中有着很好的前景，并给出了实验结果。     

Effect of Lateral Cracks on Fracture Toughness Determined by the Surface-Crack-in-Flexure Method

The surface-crack-in-flexure (SCF) method uses a Knoop indenter to create small, semielliptical surface precracks in beam specimens. Lateral cracks may interfere with the primary median crack and cause errors of up to 10% in determination of fracture toughness, particularly for materials for which the fracture toughness is ∼3 MPa·m^1/2 or less. Although the residual-stress-damage zone is ground or polished away by hand by removing 4.5–5 times the indentation depth, this amount may not be sufficient to completely remove the lateral cracks in low-fracture-toughness materials. A series of tests were conducted on sintered alpha silicon carbide with different amounts of material removed after indentation. Once the lateral cracks were fully removed, the SCF results concurred with single-edged-precracked-beam and chevron-notched-beam data collected in accordance with ASTM Designation C1421. A simple remedy for the SCF method is to examine the outer ground surface for remnants of lateral cracks before fracture and to remove more material if necessary.     

下扬子北缘前陆盆地构造变形样式

下扬子北缘前陆盆地经历了印支、燕山、喜山等多期构造改造,构造环境经开裂扩张—碰撞拼合—拉伸断陷等多次转换,最终形成了上部拉伸、中部逆冲推覆、下部拆离滑脱的"三层楼阁"式分层构造变形组合的构造几何学模式.其构造变形主要受中三叠世扬子地块与华北地块的陆—陆碰撞造山作用控制,具有横向上强弱分带、垂向上形变分层的特征.可划分为伸展变形、冲断褶皱变形、拆离滑脱变形等3种构造变形样式.      

钻削中产生迷切现象的机理研究

随着科学技术的发展．对孔加工精度的要求越来越高．钻削过程中的速切现象对孔加工的形状精度、位置精度有很大的影响．本文用试验、观察、解析的方法分析了钻头迷切现象与各种因素的关系，对提高孔加工精度有了新的揭示．     

A method for quantifying cell size from differential interference contrast images: validation and application to osmotically stressed chondrocytes

An automatic image analysis method was developed to determine the shape and size of spheroidal cells from a time series of differential interference contrast (DIC) images. The program incorporates an edge detection algorithm and dynamic programming for edge linking. To assess the accuracy and working range of the method, results from DIC images of different focal planes and resolutions were compared to confocal images in which the cell membrane was fluorescently labelled. The results indicate that a 1‐µm focal drift from the in‐focus plane can lead to an overestimation of cell volume up to 14.1%, mostly due to shadowing effects of DIC microscopy. DIC images allow for accurate measurements when the focal plane lies in a zone slightly above the centre of a spherical cell. In this range the method performs with 1.9% overall volume error without taking into account the error introduced by the representation of the cell as a sphere. As a test case, the method was applied to quantify volume changes due to acute changes of osmotic stress.     

石油天然气长输管线用钢新进展

本文介绍了１９９０年以来国外在石油天然气长输管线用钢方面的最新成果，以获得较低的强度和韧性匹配为目的经轧后加速冷却工艺后的钢的强度的预测和控制；具有优良抗氢致裂纹的含硼、微碳、低硫、Ｎｂ－Ｔｉ微合金化、Ｘ６５－Ｘ８０级管线钢的开发，满足于特殊性能要求的ＴｉＯ处理技术及Ｘ８０级ＴｉＯ细化晶粒钢、低硬度和低屈强比钢，以及复合板加工耐腐蚀钢管的生产。     

型钢厂试轧美标H型钢性能分析研究

分析了型钢厂试制热轧美标H型钢低温冲击韧性偏低的原因，并在此基础上提出了对生产工艺的优化与改进。