Surface modification of macroporous Al2O3 tubes with carbon-doped TiO2 intermediate layer and preparation of highly permeable palladium composite membranes for hydrogen separation

ABSTRACT

To prepare H₂-permeable palladium composite membranes, a novel carbon-doped microporous TiO₂ intermediate layer was introduced to modify the surface of macroporous Al₂O₃ substrates. The Pd/TiO₂–C/Al₂O₃ membrane was prepared via electroless plating, and thereafter, carbon residue in the intermediate layer was removed by calcination in air, yielding a Pd/TiO₂/Al₂O₃ membrane. Experimental results indicate that the carbon residue shrinks the pore size of the intermediate layer and facilitates a decrease of membrane defects. Additionally, carbon removal induces a higher effective membrane area at the permeate side, which enhances hydrogen permeability. Furthermore, the apparent activation energy (E_A) and stability of the as-prepared Pd/TiO₂/Al₂O₃ membrane were investigated.     

利用鸡粪为原料生产保水有机肥

从国内肥料使用的发展趋势和养鸡业的现状和发展出发，分析了当前大型养鸡场中鸡粪产生的环境污染问题及鸡粪肥料化利用的可能性，介绍了一种以新鲜鸡粪为原料，经EM菌群发酵，添加一定量的保水剂生产保水有机肥的生产工艺，产品经使用效果良好。     

稠油污水深度处理技术研究

以胜利油田草南污水深度处理站污水为对象，选用最新研制开发的HL－005高效除油剂为处理剂，研究药剂浓度及复合比例对污水的净化效果。结果表明，在现有工艺条件下，使用该药剂于最佳复配浓度下加入，在技术上是可行的，满足深度水处理的要求。     

提高84消毒液稳定性的试验

介绍了利用次氯酸钠生产84消毒液的方法。加入稳定剂后，提高了次氯酸钠中有效氯的稳定性。     

开裂混凝土有效导热系数研究:三维模拟与试验验证

利用三维的细观数值模拟,研究了混凝土在单轴拉伸和压缩破坏过程中有效导热系数(ETC)的变化规律,并分别给出拉伸应变、压缩应变与ETC的定量关系。研究发现:(1)拉伸过程中,混凝土试件的ETC在塑性阶段显著下降(23%),但在软化阶段变化很小;(2)压缩过程中,混凝土试件的ETC在塑性强化阶段前期显著下降(30%),在塑性强化阶段后期趋于稳定,而在下降阶段又开始缓慢地减小;(3)骨料与砂浆间界面开裂所形成的界面热阻是导致混凝土ETC在塑性阶段急剧下降的主要原因;(4)开裂强化了混凝土导热性能的各向异性。随后,对单轴压缩破坏混凝土垂直于裂纹方向ETC(C-ETCV)进行了试验测量。数据表明:在单轴压缩过程塑性强化阶段前期,C-ETCV急剧下降20%~25%;在塑性强化阶段后期逐渐趋于稳定。随后利用模拟结果拟合确定了王家俊模型中的界面热阻因子,比较了王家俊模型与试验结果,两者比较吻合,证明了数值方法和王家俊模型的正确性。     

高效优势降解菌处理樟脑废水

针对樟脑废水,从活性污泥中筛选出降解樟脑废水的高效优势菌,通过分离纯化,优选出3株适应能力强、生长旺盛的菌株,分别为ZH-1、ZH-2、TZH-2。经初步鉴定分别为动胶菌属、假单胞菌属、短杆菌属。试验测定了樟脑混合菌最佳生长条件的优化组合为:葡萄糖质量浓度20 g.L-1,温度30℃,pH值为7,转速为125 r.m in-1,培养时间55 h。并测定了单株菌和混合菌对樟脑废水的降解效果,结果表明混合菌的降解效果最为明显,降解率为75.23%。     

Mixing in the transition flow regime with helical ribbon agitators

The effects of the non-Newtonian properties on the effective deformation rate, mixing and circulation times and flow behaviour have been investigated in the transition flow regime of mixing systems. Based on the equivalent Couette flow, three models are proposed and are shown to predict similar and drastic increases of the effective deformation rate with the impeller rotational speed in the transition regime. The predictions are shown to fit very well data obtained for various non-Newtonian fluids mixed with helical ribbon agitators, and with literature data for anchor, blade turbine and flat disc agitators. The elasticity along with shear-thinning properties appear to have slight effects on the dimensionless mixing and circulation times in the transition regime, whereas their effects in the laminar regime are quite drastic, as reported by others.     

基于模态Petri网的行为有效区间寻找最优路径的方法

为满足客户需求,在行为约束下的业务流程中寻找行为执行的最优路径具有一定的实际意义。已有的研究是建立在静态分析基础上,通过优化算法或是行为分析来寻找最优执行路径,忽略了行为约束条件对执行行为有效性的影响,所得结果具有一定的局限性。文中在已有方法的基础上,利用Petri网行为轮廓序关系描述约束条件并确定行为有效区间,提出了基于模态Petri网分支有效区间的业务流程最优路径选择方法。该方法以行为有效区间替代已有的固定值方法,以便更好地描述业务流程的行为约束以及约束下的有效行为。通过一个具体的业务流程分析实例分析了该方法的有效性。     

光纤黑体腔高温传感器感温腔体的ANSYS分析

为了提高光纤黑体腔式高温传感器感温腔体的辐射性能,使腔体接近于理想黑体辐射状态,计算了腔体的有效发射率。基于ANSYS有限元方法对感温腔进行热辐射分析,讨论了腔底的形状、腔体温度、腔长、材料表面发射率、腔体的不等温分布对有效发射率的影响关系。结果表明,有效发射率会随着腔长的增加而增大,但会存在一个饱和值。同时当腔体处于非等温时,有效发射率随非等温程度近似呈直线下滑。综合分析结果,可以得出感温腔的优化构造参数,对传感器的制作以及提高传感器的测温准确性、分辨力和灵敏度有指导意义。     

An Experimental Approach for the Characterisation of Rigid Porous Media and Unsaturated Conductivity Relations

A laboratory procedure for the characterisation of rigid, porous media is developed and tested. The overall objective of the characterisation is to provide a basis for the choice of a relevant unsaturated conductivity relation. With the proposed procedure, the porous materials are characterised through hydraulic conductivity measurements, saturation-pressure measurements, porosity measurements and air entry pressure measurements. The measurements were conducted using water and a selected non-aqueous phase liquid (n-decane), and two types of homogeneous, rigid porous media of different origin (fritted glass samples with guaranteed homogeneity by the manufacturer, and chalk). The laboratory method successfully characterised the fritted glass samples as homogeneous on basis of calculated tortuosity values, measured bubble pressures and measured pore-size density curves. The contact angle between the liquid and the solid had negligible impact when comparing the drainage of water with the drainage of n-decane, and also when comparingn -decane drainage in dry porous media withn -decane drainage in media where a film of water separated then -decane from the pore wall. Also, the differences in saturated conductivities between n-decane and water in both samples of chalk and fritted glass were well predicted on basis of differences in density and viscosity of the liquids. The laboratory procedure was furthermore used for characterisation of the pore space available for non-aqueous liquid flow in partially water-saturated porous media. Then -decane conductivities in the fritted glass samples partially saturated with water were considerably lower than the n-decane conductivities in the dry fritted glass samples.