谈谈水泥土挡墙的合理计算

阐述了水泥土挡墙在工程基坑支护中的作用,并结合工程实例,对水泥土挡墙的合理计算模型进行了探讨。     

冷轧工作辊摩擦不稳定分析及其抑制对策

对冷轧机工作辊由于摩擦力引起的垂直、横向振动作了定性分析，指出了它们的危害，提出了预防措施。     

An atomistic-continuum inhomogeneous material model for the elastic bending of metal nanocantilevers

The equivalent elastic modulus of nanocantilever can be obtained using atomistic simulation. However, the use of this modulus to predict the bending of nanocantilever results in significant error compared with direct atomistic simulation. The error originates from the surface effect. In our current work, the nanocantilever is considered as an inhomogeneous continuum material. The distributions of materials parameters at the cross-section, such as atomistic elastic constants, are calculated from atomistic simulations. These atomistic-information-based materials parameters are used as inputs to continuum model. A numerical example case validates the presented model and methodology. To correctly predict the structure-property relations of elemental nano-structures are very important for the design of nano-devices. Our continuum model includes nano-effects and provides another way to study nanomechanics.     

Controller design for flexible structure vibration suppression with robustness to contacts

Model-based feedback control of vibration in flexible structures can be complicated by the possibility that interaction with an external body occurs. If not accounted for, instability or poor performance may result. In this paper, a method is proposed for achieving robust vibration control of flexible structures under contact. The method uses robust linear state feedback, coupled with a state estimation scheme utilizing contact force measurement. Uncertain contact characteristics are modelled by a sector-bounded non-linear function, such that state feedback gains can be synthesized using a matrix inequality formulation of the Popov stability criterion. A separation theorem is used to establish a robust H₂ cost bound for the closed loop system. Experimental results from a multi-mode flexible structure testbed confirm that vibration attenuation and stability can be maintained over a broad range of contact characteristics, in terms of compliance and clearance.     

基于组态王6.5的离心泵微机在线监控系统

离心输油泵是石油化工产品输送的主要设备,微机在线监控系统主要用于炼油厂、乙烯厂、油库、输油管道等油气输送领域离心输油泵运行状态的监测、控制以及检修的预报等。本设计采用操作指导控制系统以及工厂的分布式层次化结构思想,以离心输油泵输入输出轴的振动参数为主要测试参数,并辅以离心输油泵油温、轴瓦温度监测,同时采用ADAM4000智能模块和RS—485网络,通过监控控制仪转换成RS—232信号给计算机,实现所需参数的显示与控制和计算机对离心输油泵的快速启停控制。系统软件基于Windows XP平台,运用北京亚控组态王6.5版开发而成,具有实用、实时、可靠与友好等特点。     

基于嵌入式系统的电机振动分析仪设计

本文介绍了一种利用触控式面板模块工具在WindowsCE系统上开发LabVIEW程序的方法,并将该方法运用到对电机振动测量与分析上,构成了以嵌入式系统为平台的便携式电机振动分析设备。应用LabVIEW软件的强大数学运算功能对振动信号作频谱分析,作为电机故障的预防和诊断依据,具有重要的意义。     

分布式光纤振动传感系统的多级零频点定位研究

为了减少直线结构Sagnac分布式光纤传感系统的定位误差,提出一种多级零频点的优化方法,通过分析直线结构Sagnac分布式光纤传感定位原理,确定固定的采样速率下离散化是造成定位误差大的原因.并分析得出振动信号频域曲线会周期出现多个零频点,进而对振动定位的多级零频点优化方法进行了理论推导,阐明高倍零频点下的定位误差会有效减小.通过实验验证表明,在总长为11.769 km的传感光纤上,优化后的定位方法在不改变采样速率下可保证定位误差提升到±20 m范围内,可以基本满足系统对外界振动信号进行精确定位的要求.     

Dynamic Response Calculation of Spatial Elastic Multibody Systems with High-Frequency Excitation

The objective of this paper is to establish a computationalscheme for dynamic response calculations of a three-dimensionalmultibody mechanical system with impulsive forces, which give rise tohigh-frequency excitations. The finite-element method is employed torepresent the local deformations of three-dimensional beam-like elasticcomponents by either a finite set of nodal coordinates or a truncatedset of modal coordinates. A reduced-order model is obtained by invokinga modal transformation. Both planar and complex modal reduction schemesare established. The developed formulation is implemented into amultibody simulation program that assembles the equations of motion andproceeds with its solution. The computational scheme permits a change inthe basis of the modal space in order to regulate the admittance ofhigher frequencies and to accommodate any change in the kinematicconfiguration. Numerical examples are presented to demonstrate theapplicability of the developed computational scheme.     

低压长袋脉冲袋式除尘器设计与应用

以工业原料尤里卡沥青(EP)为对象，详细论述了低压长袋脉冲袋式除尘器的主要设计环节，着重分析了新型脉冲阀技术。指出了该技术在化肥行业原料干燥、风扫制备等方面的推广应用和发展趋势。