Electrode Evaporation Effects on Air Arc Behavior

A numerical study of the effects of copper and silver vapours on the air arc behavior is performed. The commercial software FLUENT is adapted and modified to develop a twodimensional magneto-hydrodynamic （MHD） models of arc with the thermodynamic properties and transport coefficients, net emission coefficient for the radiation model of 99% ai-1% Cu, 99% air-1% Ag, and pure air, respectively. The simulation result demonstrates that vaporization of the electrode material may cool the arc center region and reduce the arc velocity. The effects of Ag vapour are stronger compared to those of Cu vapour.     

A study of Reduced-Rank stap

This paper starts with the discussion of the principle of Reduced-Rank (RR) Space-Time Adaptive Processing (STAP). It is followed by a dedication of the upper bound performance of all eigen-based RR methods provided by Cross Spectral Method (CSM) under the condition of a given processor rank and an identical secondary sample size. A performance comparison between two RR STAP processors with prefixed structure and CSM is performed by the means of simulations. It is shown that the performance of time pre-filtering followed by jointly localized STAP structure (i.e. 3DT-SAP) is very close to the upper bound and thereby it is an effective RR approach.     

一种圆柱共形数字阵列天线波束跟踪与指向技术

针对圆柱形布阵的数字阵列天线,分析基于多重信号分类(multiple signal classification,MUSIC)算法的 测角跟踪算法和基于线性约束最小方差(linear constrained minimum variance,LCMV)的波束指向算法,提出将2 种 算法联合使用的方法;并分析通道误差对MUSIC 和LCMV 算法精度的影响。结果表明,该方法为高速飞行器圆柱 共形数字阵列天线工程化研制提供了理论依据。     

盐+碱协同对多孔碳电极材料电化学性能的影响

超级电容器作为一类新兴的能量存储转换器件,因其充放电速度快、寿命长和安全环保的特点而受到推崇。其中,用于超级电容器的电极材料一直是人们的研究重点,综合原料来源、价格和制备工艺等因素,多孔碳电极材料成为首选。盐模板法和KOH化学活化法都是制备多孔碳电极常用的方法,前者产物的孔结构以介孔为主,但操作复杂;后者活化产物比表面积大,可以精确控制多孔碳电极的孔径分布和孔体积,但该法活化后的多孔碳多以微孔为主。若将两者结合,形成优势互补,协同构建合理的碳材料结构,有助于提升多孔碳电极的电化学性能。以锂电负极行业的固废——针状焦的生焦粉为原料,利用模板和化学活化相结合的方法制备电极材料,探索盐（KCl）和碱（KOH）的添加比例对碳电极材料电化学性能的影响。研究结果表明,两种方法相结合制备得到的多孔碳样品的碳结构以表面缺陷较多的无定型碳为主。随着KOH加入量的增加,无定型结构的碳增加,但是加入过量的KOH并不能提高无定型碳的含量。三电极测试分析发现,样品PC-2表现出优异的电容性能,在1 A·g^-1的电流密度下,质量比电容达到266.9 A·g^-1;在10 A·g^-1的高电流密度下,容量保持率高达79.4%。该电极材料的内阻仅为0.67 Ω,并且双电层电容性能有极短的响应时间。当m(生焦粉)∶m(KCl)∶m(KOH)=1∶3∶2时,KCl和KOH的协同活化效果达到了最佳,显著提高了碳电极材料电荷的传输能力,且能有效地缩短电解质离子在材料内部的扩散路径,表现出较快的充放电速度。     

碲镉汞环孔p-n结反常特性分析

在HgCdTe 环孔p-n结器件的研制过程中,经常会出现一些反常现象,如负的开路电压和负的光电压等.现对上述现象进行理论分析,并通过大量实验对上述反常现象进行了验证.     

FY-2C卫星太阳电池阵在轨性能分析

风云二号气象卫星(C星)在轨工作近六年,该卫星电源系统采用BSFR太阳电池阵,这是空间电源工程首次在地球静止轨道上应用。母线电流遥测数据分析表明,太阳电池阵在同步轨道四年衰降约11%。     

Phase change memory alloys: GST cell array characterization using picosecond ultrasonics

Phase change random access memory alloys (PRAM or PCM) are a class of non-volatile memory that is thought as viable alternatives to flash memory technology or to supplement other memory technologies depending on the end applications and its key performance requirements. Ge₂Sb₂Te₅ alloy (GST) is the most widely used chalcogenide material for PCM application, and has many unique properties, including strong temperature-dependent film properties, low thermal conductivity, and high electrical resistivity. Picosecond ultrasonics was used to make non-contact, non-destructive measurements of GST films on blanket wafers and directly on product wafers. On-product wafer measurements were made on various via array (0.5 μm and 1 μm between cell edges with CD size from 250 to 800 nm). Measurements have shown excellent correlation to cross-section SEM and were consistent with CMP polish times for both blanket and pattern wafer measurement. Excellent repeatability based on extensive measurements demonstrates the capability and reliability of picosecond ultrasonic technology. Picosecond ultrasonic measurements also provide rapid characterization across the whole wafer at production-worthy throughputs.     

O2,金属电极/YSZ界面的电化学研究

本文利用交流阻抗和直流极化的电化学方法，比较了200～500℃氧在Pt、Ag、Au、Ag－Pd四种化学镀电极上的扩散，350～600℃氧在金属电极／YSZ界面的电化学反应速度以及阴阳电荷传递系数；计算了350～600℃四种电极的界面阻抗；研究了400℃时O2在Ag－Pd电极界面的交换电流密度Io与氧分压Po2的定量关系．     

碱性锌空气电池的新发展

碱性锌空气电池具有较高的质量比能量和质量比功率,工作电压平稳,成本低廉,受到世界的广泛关注。介绍了碱性锌空气电池的工作原理和优点及其应用领域;论述了碱性锌空气电池发展所要解决的问题;分析了目前国内外的发展现状;并展望了其发展前景。