絮凝剂品种对水下不分散混凝土性能影响的比较

通过电荷中和、吸附架桥和表面吸附分析了絮凝剂作用机理 ,运用絮凝机理进一步分析了絮凝剂在水泥体系中的作用以及絮凝剂对流动度的影响 ,从而对掺加JHP (纤维素类 )和Pj (丙烯类 )絮凝剂的水下不分散混凝土性能作了综合比较。掺Pj絮凝剂的混凝土 ,其坍扩度损失大 ,抗分散性能不如掺JHP絮凝剂的好 ;掺JHP絮凝剂的混凝土坍扩度在 3h内损失很小     

Display reflectance: Basics,measurement, and rating

Abstract— In this paper, methods and instruments for measurement and evaluation of reflection characteristics are reviewed as needed for research and development of electronic displays and for material and surface modeling with ray‐tracing and rendering software packages. Contrast under ambient illumination and recognizability under daylight illumination are prime development targets in the electronic‐display field, while computation and synthesis of realistic scenes and objects are pushing the need for physical data in computer graphics applications. Three categories of instruments are available for detailed reflection analysis. They are based on (1) gonioscopic (mechanical) and conoscopic (optical) directional scanning, (2) imaging approaches, and (3) on arrangements with variable source or receiver aperture. The capabilities, advantages, and limitations of these methods are introduced and discussed in order to facilitate appropriate selection of methods and instruments. For illustration purposes we present typical results obtained from commercial electronic display screens. A basis for continued widespread implementation and standardization of reflection metrology as required for objective rating and comparison of electronic‐display screen performance under ambient illumination is provided.     

DVD视盘机的电磁骚扰抑制

本文讨论对DVD视盘机的电磁骚扰的抑制，使其电磁骚扰水平符合有关标准的要求，不成为新的电磁环境中的污染源。     

A versatile data acquisition system for time resolved X-ray scattering using gas proportional detectors with delay line readout

A data acquisition system for time resolved X-ray scattering experiments using linear, quadrant or area gas proportional detectors with delay line readout based on commercially available hardware (National Instruments) is described. The system can easily be configured for recording data from point detectors (e.g. photomultipliers and photodiodes) and/or ancillary data only. Applications involving measurements with two different types of time to digital converters illustrate the features and performances of the system.     

Assessing organo-clay dispersion in polymer layered silicate nanocomposites: A SAXS approach

A SAXS method for the quantitative assessment of the morphology of polymer layered silicate nanocomposites is proposed. Fitting the SAXS patterns, the number of clay layers, the periodicity of the layers in the tactoids, the thickness of the regions interposed between the clay platelets and their distributions can be measured. A good agreement with TEM data was obtained, avoiding the inconsistencies with microscopical observations often reported in the literature.     

Operation of superconducting fault current limiter using vacuum interrupter driven by electromagnetic repulsion force for commutating switch

Using conventional high‐temperature superconducting wire, a model superconducting fault current limiter (SFCL) is made and tested. Solenoid coil using Bi2223 silver sheath wire is so made that inductance is as small as possible and a vacuum interrupter is connected in series to it. A conventional reactor coil is connected in parallel. When the fault current flows in this equipment, superconducting wire is quenched and current is transferred into the parallel coil because of voltage drop of superconducting wire. This large current in parallel coil actuates magnetic repulsion mechanism of vacuum interrupter. Due to opening of vacuum interrupter, the current in superconducting wire is broken. By using this equipment, current flow time in superconducting wire can be easily minimized. On the other hand, the fault current is also easily limited by large reactance of parallel coil. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 164(1): 52–61, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20315     

A small-angle X-ray scattering study of powder compaction

This work demonstrated a novel and potentially important application of two-dimensional small-angle X-ray scattering (2D-SAXS) to investigate powder compaction. SAXS from powder compacts of three materials commonly used for pharmaceutical tabletting exhibited azimuthal variations, with stronger intensity in the direction of the applied compaction force, relative to the transverse direction. This implied that compaction of a (macroscopic) powder could also produce changes on the molecular (nanometre) scale, which can be probed by 2D-SAXS. Two possible explanations for this effect were suggested. A combination of anisometric (i.e. elongated or flattened) granules with anisotropic morphologies could result in azimuthal variation in X-ray scattering due to granule orientation. It is expected that this mechanism would require relatively low packing density, so may operate during die filling. Granule re-orientation appeared less likely at higher packing densities and compaction pressures, however. Under these conditions, the changes in the 2D-SAXS patterns would be consistent with the powder granules becoming relatively flattened in the compression direction, with corresponding changes in their nano-scale morphology. The magnitude of this effect was found to vary between the materials used and increased with compaction pressure. This suggested that 2D-SAXS studies could provide useful information on force-transmission within a compressed powder. Further analysis of the data also suggested differences in the compaction mechanisms (i.e. granule re-orientation, deformation or fragmentation) between the materials studied.     

Distributed Optical Fiber Sensor for Multi-point Temperature Measurement

The distributed optical fiber sensing technology is overviewed, which is based on Raman scattering light theory. Basic operation principle, structure, system characteristics and signal processing are discussed. This structure and method of the signal processing possess of certain spatial resolution, hence will ensure the practicability of system.     

Surface segregation studied by low-energy ion scattering: experiment and numerical simulation

The changes in surface composition of metallic alloys caused by segregation can be very efficiently studied by low-energy ion scattering (LEIS) due to the specific surface sensitivity of this technique. Investigations of single-crystal surfaces of ordered alloys are of particular interest because they provide the possibility to investigate the interplay between segregation effects and the order-disorder phase transition when passing through the transition temperature. Exemplifying these effects for bimetallic alloys we consider in particular the CuAu-system.For the quantitative interpretation of energy and angle resolved LEIS intensity distributions we compare experimental results with those from numerical simulations using the MARLOWE code which we extended with a detailed trajectory analysis. This allows us to apply various discrimination criteria, such as number of collisions, distance of closest approach, identification of the scattering crystal layer, total path length, etc. On this basis structural effects, ion survival probabilities and the influence of thermal vibrations can be studied.We demonstrate this potential by using CuAu(1 0 0) as a special example. The scattering potential parameters were calibrated with elemental single crystals of known structures and the anisotropic Debye temperatures taken from the literature showed good agreement, neutralization was of minor importance in this case. Our procedure could be successfully used for the quantitative analysis of the composition of the first and second layer as a function of temperature. These results are in good agreement with theoretical predictions.     

Intermediate order in tetrahedrally coordinated silicon: evidence for chainlike objects

In this report, we describe the nature of intermediate order in silicon as determined by recent measurements on thin films using transmission electron microscopy (TEM) and Raman scattering. The TEM images show in addition to the expected continuous random network (CRN), the presence of highly ordered quasi-one-dimensional “chain-like objects” (CLO's) that are 1–2 nm wide and tens of nm long that meander and show some evidence of cross-linking with each other. The presence of these objects correlate to a Raman feature centered at 490 cm⁻¹ whose width is 35–40 cm⁻¹, and is used to quantify the heterogeneity in terms of the CLO and CRN (=475 cm⁻¹ scattering) concentrations. The 490 and 35 cm⁻¹ values are consistent with bond angle deviations approaching 0°, and thus reinforces an association with the CLOs. We find that in reference quality a-Si:H (made using pure SiH₄), the CLO concentration is about 5 vol%, while in state-of-the-art material using high H₂ levels of dilution during processing, it increases to about 15%. Increased stability of such material to light-soaking is thus not mediated by a direct volumetric replacement of poor with high-quality components. Rather, an important characteristic of intermediate order in silicon is the low-dimensional aspect of its order, which allows it to influence more total volume than which it is itself composed. Consistent with these and other recent findings, we propose a tensegrity model of amorphous silicon.