改性活性炭的表面特性及其对苯酚的吸附性能

研究了表面改性对活性炭吸附苯酚性能的影响。研究发现,硫酸氧化可增加活性炭表面酸性基团的含量,提高了活性炭的表面亲水性,降低pHPZC值,因而对吸附水中的苯酚的性能产生明显影响,降低了对苯酚的吸附。     

Modeling the large‐strain constitutive behavior of polycarbonate under isothermal and anisothermal conditions

The tensile behavior of polycarbonate was studied at large strains below the glass‐transition temperature. Experiments were carried out at a series of constant temperatures and also under conditions of falling temperatures. The specimens necked with a natural draw ratio of approximately 2, and the study was mainly focused on the necked material. Isothermal experiments revealed an elastic mechanism that initiated beyond the natural draw ratio. A model consisting of an Eyring process and two Gaussian elastic mechanisms was found to be applicable to both the isothermal and anisothermal stress‐relaxation and stress–strain results. The same model also produced reasonable estimates of the stresses generated during the necking process. In addition, a simple relationship between the isothermal and anisothermal stress relaxation was demonstrated. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2105–2116, 2005     

单束纤维增强树脂基复合材料的热水老化性能研究

在96℃水中,对开芙拉29(Kevlar29),开芙拉49(Kevlar49)和聚苯撑苯并唑(PBO)纤维束增强的环氧树脂和双马树脂基复合材料进行老化实验后,再在60℃下进行干燥脱水处理。实验测定了吸水和脱水阶段的含水率及热水老化试样和干燥试样的弯曲性能。结果表明:在热水作用下,复合材料的弯曲强度和模量随热水老化时间的延长呈下降趋势,纤维与树脂基体间的界面发生破坏;再干燥脱水后,材料的弯曲强度和模量恢复,但仍低于未老化试样的性能,纤维与树脂基体间的界面破坏情况也类似。     

热处理前后丙烯腈／溴乙烯共聚纤维的热性能和阻燃性能研究

分析了热处理前后丙烯腈／溴乙烯共聚纤维的热性能与溴乙烯含量、升温速率或热处理时间的关系，并对纤维的阻燃性与溴含量或热处理时间关系进行了研究。结果表明，溴含量的增加或热处理时间的延长对热稳定性和阻燃性的提高有较大影响，而且经热处理后纤维的阻燃性与溴无关。     

Effects of individuals' locus of control and computer self-efficacy on their e-learning acceptance in high-tech companies

High-tech companies encounter intense competition in today's global economy. With rapid changes in working environments, high-tech employees must learn quickly and effectively to solve difficult problems and increase their productivity. Many large high-tech companies have recently implemented electronic learning (e-learning) for employee training. However, e-learning systems are expensive and often underutilised. Therefore, understanding the factors associated with acceptance to e-learning are of priority concern. By integrating locus of control, computer self-efficacy and technology acceptance model (TAM) into one model, this study examines the feasibility of the extended TAM to explain employee acceptance of e-learning systems. Data were collected from 223 employees at five high-tech companies located in the Hsinchu Science Park, Taiwan. Analytical results indicate that locus of control had significant direct effects on perceived usefulness and perceived ease of use. Computer self-efficacy had significant direct effects on perceived ease of use and behavioural intention to use. Overall, analytical results provide strong support for using the extended TAM to explain user acceptance of e-learning systems. The research and practical implications of findings are discussed.     

Adaptive training interfaces for less-experienced,elderly users of electronic devices

A great number of complex electronic devices are now part of our everyday lives. While many of us learn to handle these products by trial and error; others, especially older users with little experience in using electronic devices, need support. In order to allow the user maximum flexibility in terms of learning time and location, a training programme is presented which is implemented as part of the software embedded in the product itself. Particular focus is placed on the effect of adaptive training on learning. In this study, the training versions differed in their ability to adjust their complexity to the user's experience (adaptive user interface complexity) and their capability to support the learner by prompting them during the learning process (adaptive training advice). The results show that the adjustment of complexity had a positive effect on users’ experience: elderly users who trained with an adaptive interface were more successful in learning to use a mobile phone. Adaptive training advice, however, was found to have no significant effects on learners’ success and reduced their self-efficacy. This work offers guidelines on how to design integrated training applications for electronic devices that successfully help elderly users with little prior experience.     

Nitrogen transformations during hydrolysis and nitrification of urea

Nitrogen transformations occurring in ten soils fertilized with urea were determined during incubation in the laboratory for four weeks. Urea was applied at one rate, but with different placement methods. Urea was applied in solution, as prills with a 1 cm grid spacing and as prills with no spacing. Unfertilized soils and soils amended with KNO₃ solution were included as controls.Nitrite accumulated in the majority of soils treated with urea, and the maximum nitrite concentration measured was directly related to initial soil pH. Cumulative gaseous N losses as percentages of applied N were: NH₃, 0-59.6; N₂, 0-4.9; N₂O, 0-9.9; KMnO₄-N, 0-1.3; CH₃ONO, 0-<0.1. No gaseous N evolution was detected in control treatments. Gaseous N losses were correlated with soil pH (NH₃) maximum NO ₂ ^- concentration (N₂, N₂O, KMnO₄-N) and organic C content (N₂, N₂O). Fertilizer placement effects were generally not significant and were small in comparison with differences between soils.

---

Resumo Foram determinadas, durante incubação em laboratório por quatro semanas, as transformações do nitrogênio ocorridas em dez solos fertilizados com uréia. A uréia foi aplicada a um só nivel, mas com diferentes métodos de aplicação: em solução e em grânulos com 1 cm de espaçamento de grade e em grânulos sem espaçamento. Solos não fertilizados e solos corrigidos com solução de KNO₃ foram incluidos como controles.O nitrito acumulado na maioria dos solos tratados com uréia e a concentração máxima de nitrito medido foram diretamente relacionados ao pH inicial do solo. As perdas cumulativas de N gasoso tomadas em percentagens de N aplicado foram: NH₃, 0-59.6; N₂, 0-4.9; N₂O; 0-9.9; KMnO₄-N, 0-1.3; CH₃ONO, 0-<0.1. Não foi detectada liberação de N gasoso nos tratamentos de controle. As perdas de N gasoso foram relacionadas com o pH do solo (NH₃), concentração máxima de NO ₂ ^- (N₂, N₂O, KMnO₄-N) e teor de C orgânico (N₂, N₂O). Efeitos da aplicação de fertilizante não foram de um modo geral significativos e foram pequenos em comparação com as diferenças entre os solos.

     

Preparation,morphology, and mechanical properties of elastomers based on α,ω‐dihydroxy‐polydimethylsiloxane/polystyrene blends

α,ω‐Dihydroxy‐polydimethylsiloxane/polystyrene (PDMS/PS) blends were prepared by the solution polymerization of styrene (St) in the presence of α,ω ‐dihydroxy‐polydimethylsiloxane (PDMS), using toluene as solvent and benzoyl peroxide (BPO) as initiator. The PDMS/PS blends obtained by this method are a series of stable, white gums, which were vulcanized to elastomers at room temperature with methyl‐triethoxysilicane (MTES). The use level of MTES was far more than the necessary amount used to end‐link hydroxy‐terminated chains of PDMS, with the excess being hydrolyzed to crosslinked networks, which were similar to SiO₂ and acted as filler. Investigations were carried out on the elastomeric materials by extraction measurement, swelling measurement, and scanning electron microscopy. The extraction data show that at each composition the amount of soluble fraction is less than expected and the difference between experimental and theoretical values becomes more and more significant as PS content increases. This is mainly due to the grafting of PS onto PDMS and the entanglement of PS in the interpenetrating polymer network (IPN), which consists of either directly linked PDMS chains or chains linked via PS grafts and is formed by free radical crosslinking of PDMS during the radical polymerization of St. PS grafted on PDMS is insoluble and PS entangled in the IPN is difficult to extract. Both render the soluble fraction to be less than expected. As the St content in preparing PDMS/PS blends increases, the probability of grafting PS onto PDMS also increases, which may subsequently produce a higher crosslinking level of PDMS networks that linked via PS grafts by radical crosslinking. As a result, not only the amount of insoluble PS increases but also PS entangled in the IPN is more difficult to extract. Scanning electron microscopy demonstrates that the elastomer system has a microphase‐separated structure and a certain amount of PS remains in the PDMS networks after extraction, which is in accordance with the extraction data. Moreover, the mechanical properties of the elastormeric materials have been studied in detail. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 3542–3548, 2004     

Composites based on eucalyptus tar pitch/castor oil polyurethane and short sisal fibers

Polymeric materials are being developed with renewable resources to promote industrial progress with environmentally friendly technologies. For this reason, polyurethane samples were prepared with 4,4′‐diphenylmethane diisocyanate (NCO/OH = 1), eucalyptus tar pitch (biopitch), castor oil as a polyol, and dibutyltin dilaurate as a catalyst. These materials were reinforced with different contents of short sisal fibers (0, 2.5, 5.0, 7.5, and 10.0%) and were prepared by resin‐transfer molding. The composites were characterized by IR absorption spectroscopy, thermal analysis (thermogravimetry and differential scanning calorimetry), impact resistance, scanning electron microscopy, and water absorption resistance. These materials showed hydrophobic characteristics, despite the addition of sisal fibers. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3797–3802, 2003     

税收电子数据分析在煤炭企业税源管理工作中的研究与实践

随着信息技术的不断发展,利用先进技术成果挖掘和提炼税收电子数据信息,深化数据分析,为税源管理特别是重点税源管理工作服务,已经成为了现代税收发展的潮流。它是信息管税、风险控制的重要组成部分,也是各级税务机关、专家和学者在税源管理方面面临的重要课题之一。以朔州市国家税务局煤炭企业税收管理信息系统建设为背景,研究税收数据分析在税源管理工作中作用和意义。