钛制容器产品试板压弯角度的探讨

针对钛制容器产品试板弯曲角度按现行标准执行中出现的问题，从力学角度进行探讨，导了了试板压弯对所采用的压头直径与试板厚度和延伸率的关系，即Ｄ〉（１／δ－１）ｔ，并提出了设定试板弯曲压头直径的新思路。     

A NEW HEAT-TREATMENT PROCESS FOR 2014 ALUMINUM ALLOY AND ITS MECHANISM

The plan of heat-treatment process for 2014Al alloy is designed using orthogonal method, the heat-treatment experiments are made and the mechanical properties are tested according to the designed plan. The effect of solid solution temperature, ageing temperature, ageing time on microscopic mechanism of the mechanical properties of the 2014Al alloy is studied using microscope, transmission electron microscope. The best heat treatment process of the 2014Al alloy is developed. The experimental results indicate that the strength σ_b, yield stress σ_(0.2), percentage elongation δ of the alloy reach separately 490～500 MPa, 450～490 MPa, 10～12％ adopting the new heat treatment process. Compared with GB, the strength increases 20～30％, the percentage elongation increases 30～40％. The mechanism of the new heat-treatment process is also discussed.     

试样长度对 13CrMo44钢管力学性能的影响

研究了试样长度对13CrMo44珠光体耐热钢管力学性能的影响，研究结果表明，随着L0升高，该钢管的伸长率下降并满足δ=16.9% 68.2%√F/L0关系，L0较短时，其对钢管的抗拉强度（σb)和屈服强度（σs)没有什么影响；L0较长时，钢管的σb和σs都稍有下降，解释了产生上述现象的原因。     

聚苯硫醚/聚四氟乙烯复合材料的研究

制备并研究了PPS/PTFE合金的热行为、力学性能以及摩擦学性能,并对其微观形态进行了观察。实验结果表明,此合金的耐热性能相对于聚苯硫醚纯树脂有明显的提高,而且聚四氟乙烯的加入可以改善聚苯硫醚的力学性能及摩擦磨损性能。     

外力作用速度对PVC试样拉伸性能的影响

分析了PVC的拉伸过程,讨论了外力作用速度对PVC的影响.结果表明:PVC的拉伸屈服强度随外力作用速度的提高而提高,断裂伸长率却随之下降.     

Crack elongation and its width of large depth reinforced concrete beams

In order to meet the requirement of structural inspection,the crack spacing and crack width at various heights in the tensile zone of six large depth reinforced concrete beams were measured under several loading levels of serviceability state.The effects of the depth of normal section beams on the crack spacing and crack width were analyzed,and the modified model is proposed for calculating the average crack spacing by thinking about the depth of normal section,the reinforcement arrangement and the effective reinforcement ratio.The relationships of crack widths at any position in the tensile zone and at the reinforcement level on the side surface of beam were studied.By theoretical and statistical analysis,a method is proposed to calculate the ratios of crack widths between any position and the reinforcement level on the side surface of large depth reinforced concrete beams.     

不同混纺比甲壳素/长绒棉混纺纱工艺与性能研究

应用东华大学自行研制的小型环锭纺纱整套系统纺出10/90、20/80、30/70、40/60、50/50等5种不同混纺比的19.5 tex甲壳素/棉混纺纱,阐明了各个工序的工艺参数,测定了混纺纱的断裂强度、断裂伸长率、条干CV值和毛羽,分析了混纺比对混纺纱性能的影响.结果表明,10/90甲/棉混纺纱的强伸度最好;20/...     

涤纶低弹网络丝拉伸断裂性能表征

研究在不同的夹持距离、不同拉伸速率条件下涤纶低弹网络丝机械性能 ,从实验结果得知 ,在相同拉伸速率下 ,断裂强力随夹持距离的增加呈对数关系减少。在相同夹持距离下 ,随着拉伸速率的提高 ,平均断裂强力提高 ,断裂伸长增大 ,断裂比功也增大。     

Inhibition and recovery of cucumber roots given multiple treatments of ferulic acid in nutrient culture

Ferulic acid, a frequently cited allelopathic agent, inhibited photosynthesis, leaf expansion, and root elongation of cucumber seedlings grown in aerated nutrient cultures in a growth chamber. Other effects were a reduction in the proportion of radioactivity fixed by photosynthesis translocated to roots, a stimulation in secondary root initiation, and an increase in root-shoot ratios. Inhibition of leaf expansion and root elongation induced by multiple ferulic acid treatments was rapidly lost once ferulic acid was removed from the root environment. The changes in general root morphology, i.e., average root length and root number, associated with ferulic acid treatments, were partially reversed or not affected when ferulic acid was removed from the root environment.Paper No. 11411 of the Journal Series of the North Carolina Agricultural Research Service, Raleigh, North Carolina 27695-7601. The use of trade names in this publication does not imply endorsement by the North Carolina Agricultural Research Service of the products named, nor criticism of similar ones not mentioned.     

Cu-Al-Mn-Zn-Zr记忆合金的显微组织与力学行为

利用金相显微镜、透射电镜、扫描电镜观察和力学性能测试等手段研究了Cu—18．4A1—8．7Mn—3．4Zn—0．1Zr(摩尔分数，％)记亿合金(多晶)在不同温度与组织下变形时的力学行为。实验合金在不同温度下变形时延伸率不同，变形温度(Td)在Ms与Af之间时的延伸率小于变形温度(Td)高于Af时的延伸率。对实验合金施加应力时，最初的变形主要来自应力诱发马氏体，继而发生马氏体变体择优合并，二者对合金的变形都有贡献；变形量更大时，变体界面共格性被破坏，部分马氏体丧失热弹性。少量α相的析出不影响记忆效应，可使延伸率得以提高。