基于Hyper Mesh的商用车驱动桥壳有限元分析

驱动桥壳是汽车的重要部件之一,应具有足够的强度和刚度。先利用UG建立桥壳的几何模型,然后在Hyper Mesh中进行网格划分、加载和约束,对驱动桥壳进行有限元分析计算,最后提出改进方案。     

Optimal hole shape for minimum stress concentration using parameterized geometry models

The goal of this work is to obtain optimal hole shape for minimum stress concentration in two-dimensional finite plates using parameterized geometry models. The boundary shape for a hole is described by two families of smooth curves: one is a “generalized circular” function with powers as two parameters; the other one is a “generalized elliptic” function a and b are ellipse axes) with powers as two parameters and one of the ellipse axes as the third parameter. Special attention is devoted to the practicability of parameterized equations and the corresponding optimal results under the condition with and without the curvature radius constraint. A number of cases were examined to test the effectiveness of the parameterized equations. The numerical examples show that extremely good results can be obtained under the conditions with and without curvature radius constraint, as compared to the known solutions in the literature. The geometries of the optimized holes are presented in a form of compact parametric functions, which are suitable for use and test by designers. It is anticipated that the implementation of the suggested parameterized equations would lead to considerable improvements in optimizing hole shape with high quality.     

双边开关磁阻直线电动机的设计

介绍了双边开关磁阻直线电动机(LSRM)的组成、工作原理及其尺寸设计方法,给出了LSRM样机的尺寸设计结果,并采用有限元法分析LSRM磁场分布规律,进行磁场分段计算,从而得到了最大电感、最小电感和相绕组匝数。测试结果表明,该LSRM样机启动力较大且出力不受电流方向影响,但也存在出力有脉动和噪声较大等问题,该问题可通过优化结构设计和控制算法解决。     

Thermodynamic studies on the complete phase diagram of aqueous two phase system containing polyethylene glycol dimethyl ether 2000 and di-potassium hydrogen phosphate at different temperatures

The liquid-liquid equilibrium of polyethylene glycol dimethyl ether 2000 (PEGDME₂₀₀₀)+K₂HPO₄+H₂O system has been determined experimentally at T=(298.15,303.15,308.15 and 318.15) K. The liquid-solid and complete phase diagram of this system was also obtained at T=(298.15 and 308.15) K. A nonlinear temperature dependent equation was successfully used for the correlation of the experimental binodal data. Furthermore, a temperature dependent Setschenow-type equation was successfully used for the correlation of the tie-lines of the studied system. Moreover, the effect of temperature on the binodal curves and the tie-lines for the investigated aqueous two-phase system have been studied. Also, the free energies of cloud points for this system and some previously studied systems containing PEGDME₂₀₀₀ were calculated from which it was concluded that the increase of the entropy is the driving force for formation of aqueous two-phase systems. Additionally, the calculated free energies for phase separation of the studied systems were used to investigate the salting-out ability of the salts having different anions. Furthermore, the complete phase diagram of the investigated system was compared with the corresponding phase diagrams of previously studied systems, in which the PEGDME₂₀₀₀ has been used, in order to obtain some information regarding the phase behavior of these PEGDME₂₀₀₀+salt+water systems.     

The geometric element transformation method for mixed mesh smoothing

The geometric element transformation method (GETMe) is a geometry-based smoothing method for mixed and non-mixed meshes. It is based on a simple geometric transformation applicable to elements bounded by polygons with an arbitrary number of nodes. The transformation, if applied iteratively, leads to a regularization of the polygons. Global mesh smoothing is accomplished by averaging the new node positions obtained by local element transformations. Thereby, the choice of transformation parameters as well as averaging weights can be based on the element quality which leads to high quality results. In this paper, a concept of an enhanced transformation approach is presented and a proof for the regularizing effect of the transformation based on eigenpolygons is given. Numerical examples confirm that the GETMe approach leads to superior mesh quality if compared to other geometry-based methods. In terms of quality it can even compete with optimization-based techniques, despite being conceptually significantly simpler.     

Algorithm,software, and hardware optimizations for Delaunay mesh generation on simultaneous multithreaded architectures

This article focuses on the optimization of PCDM, a parallel, two-dimensional (2D) Delaunay mesh generation application, and its interaction with parallel architectures based on simultaneous multithreading (SMT) processors. We first present the step-by-step effect of a series of optimizations on performance. These optimizations improve the performance of PCDM by up to a factor of six. They target issues that very often limit the performance of scientific computing codes. We then evaluate the interaction of PCDM with a real SMT-based SMP system, using both high-level metrics, such as execution time, and low-level information from hardware performance counters.     

Finite Element Analysis of 6300 Deep Groove Ball Bearing

Rolling bearing is widely used in mechanical support, its general components are the inner ring, outer ring, the ball, retainer etc.. Now many companies in developed countries and university in the rolling bearing as the research object, and has made great progress in design theory, the experiment method and production technology etc. We will use the finite element ANSYS to establish the model of deep groove ball bearing. Through the contact analysis, we can get the contact stress between the rings and balls, strain, contact state, penetration, sliding distance and the friction stress distribution. These values are compared to the theoretical values with Hertz theory, and they have better consistency, provide the good theoretical basis for the optimization design of rolling bearings.     

Impacts of essential elements of management on IT application maturity — A perspective from firms in China

This paper explores the impacts of essential elements of management on IT application maturity (ITAM). A game theoretical model is established to show that a firm's IT application maturity should match with its essential elements of management. In order to further validate the analytical result, a data set with 137 firms was collected via a survey instrument. Using reliability and factor analysis on the dataset, a four-dimension measurement construct of IT application maturity is proposed together with a three-dimension measurement construct of essential elements of management. Empirical analysis is then conducted to address research questions on the impacts of essential elements of management on IT application maturity. It is found that while a firm's strategic cooperation capability has no significant effect on IT application maturity, its internal coordination capability positively influences all four dimensions of IT application maturity. For the firm's execution capability, although it shows no significant effect on the overall IT application maturity, it does positively affect the technology and man-machine synergy dimensions of IT application maturity. The findings of this study offer practical guidance for organizations to better align their IT application maturity with essential elements of management.     

A parallel preconditioned conjugate gradient solution method for finite element problems with coarse–fine mesh formulation

The object of this paper is a parallel preconditioned conjugate gradient iterative solver for finite element problems with coarse-mesh/fine-mesh formulation. An efficient preconditioner is easily derived from the multigrid stiffness matrix. The method has been implemented, for the sake of comparison, both on a IBM-RISC590 and on a Quadrics-QH1, a massive parallel SIMD machine with 128 processors. Examples of solutions of simple linear elastic problems on rectangular grids are presented and convergence and parallel performance are discussed.     

Simulation and fabrication of piezoresistive membrane type MEMS strain sensors

Two piezoresistive (n-polysilicon) strain sensors on a thin Si₃N₄/SiO₂ membrane with improved sensitivity were successfully fabricated by using MEMS technology. The primary difference between the two designs was the number of strips of the polysilicon patterns. For each design, a doped n-polysilicon sensing element was patterned over a thin 3 μm Si₃N₄/SiO₂ membrane. A 1000×1000 μm² window in the silicon wafer was etched to free the thin membrane from the silicon wafer. The intent of this design was to fabricate a flexible MEMS strain sensor similar in function to a commercial metal foil strain gage. A finite element model of this geometry indicates that strains in the membrane will be higher than strains in the surrounding silicon. The values of nominal resistance of the single strip sensor and the multi-strip sensor were 4.6 and 8.6 kΩ, respectively. To evaluate thermal stability and sensing characteristics, the temperature coefficient of resistance [TCR=(ΔR/R₀)/ΔT] and the gage factor [GF=(ΔR/R₀)/] for each design were evaluated. The sensors were heated on a hot plate to measure the TCR. The sensors were embedded in a vinyl ester epoxy plate to determine the sensor sensitivity. The TCR was 7.5×10⁻⁴ and 9.5×10⁻⁴/°C for the single strip and the multi-strip pattern sensors. The gage factor was as high as 15 (bending) and 13 (tension) for the single strip sensor, and 4 (bending) and 21 (tension) for the multi-strip sensor. The sensitivity of these MEMS sensors is much higher than the sensitivity of commercial metal foil strain gages and strain gage alloys.