Isothermal crystallization behavior of hybrid biocomposite consisting of regenerated cellulose fiber,clay, and poly(lactic acid)

Quantitative analysis of isothermal crystallization kinetics of PLA/clay nanocomposite and PLA/clay/regenerated cellulose fiber (RCF) hybrid composite has been conducted. The crystallization rate constant (k) according to Avrami equation was higher in PLA/clay nanocomposite than in PLA/clay/RCF hybrid composite at the same crystallization temperature. The equilibrium melting temperature obtained by Hoffman–Weeks equation was almost same in both composites, whereas stability parameter was greater in hybrid composite than in nanocomposite. Activation energy of hybrid composite for crystallization was larger than that of nanocomposite. The value of nucleation parameter (K_g) and surface free energy (s_e) of hybrid composite were larger than nanocomposite, indicating that hybrid composite has a less folding regularity than nanocomposite. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effect of Li+ ions on structure,properties, and actuation of cellulose electro‐active paper actuator

We have reported an electro‐active paper actuator from regenerated cellulose. After dissolving cellulose fibers with a solution of lithium chloride in N,N‐dimethylacetamide, cellulose was regenerated by combining distillation of cellulose solution along with washing with the mixture of deionized water, isopropyl alcohol, and running water. However, the effect of Li⁺ ions on structure, properties, and the actuation behavior of the actuator was not studied. This article describes the changes in these parameters when the Li⁺ ions are removed by subjecting it to different running water exposure time. The structure and properties of cellulose electro‐active paper and its actuation behavior were studied. As Li⁺ ions content reduced from 4354.17 to 10.26 ppm by increasing the exposure time of running water, crystallinity, Young's modulus, and bending displacement decreased. Details about the investigation have been explained. This elimination of ions is important to increase the piezoelectric effect in EAPap by decreasing the ion migration effect. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

溶胶-凝胶法制备磷钨酸-硅胶催化合成苹果酯

采用溶胶-凝胶法制备了一系列磷钨酸-硅胶催化剂(PW/SG),考察了该催化剂催化乙酰乙酸乙酯与乙二醇液相缩合制备苹果酯的反应性能。实验结果表明,PW质量分数为40%时的PW/SG催化剂表现出最佳的催化活性;40%PW/SG催化剂制备苹果酯的最佳工艺条件为:n(乙酰乙酸乙酯)∶n(乙二醇)=1∶1.2,催化剂用量占反应物质量的0.36%,带水剂环己烷用量占反应物体积的30%,反应温度383K,反应时间90min;在此条件下,乙酰乙酸乙酯的转化率可达95.5%,苹果酯的选择性大于97%;催化剂稳定性实验表明,经5次重复使用,40%PW/SG催化剂的活性基本保持不变,乙酰乙酸乙酯转化率稳定在95.0%左右。     

常用浆种在纤维中底板抄造中的应用分析

本文介绍了常用几种浆板在纤维中底板中的应用。     

一株秸秆纤维素降解菌株的筛选及其降解特性

纤维素是自然界一种最重要的可再生资源,本文从玉米地土壤中分离出 1 株产纤维素酶能力较强的菌株J-N3。以羧甲基纤维素为唯一碳源的分离培养基和刚果红染色法进行初筛,再将筛选到的菌株进行液体发酵培养并测定酶活。结合形态学特征与分子生物学鉴定结果得知,菌株J-N3为芽孢杆菌属( Bacillus)。并对其酶学性质进行初步研究,得到酶最适pH为6.0时,最适反应温度为50 ℃。玉米秸秆经菌株 J-N3处理20 d 时,秸秆失重率及纤维素分解率分别达到26.22%、31.01%。     

细菌纤维素的功能化改性研究进展

细菌纤维素(BC)是微生物生长过程中产生的以葡萄糖为基本骨架的结构性碳水化合物,具有高纯度、高聚合度、高结晶度、高持水性、高抗张强度和良好的机械强度,在功能材料领域显示了巨大的应用潜力.综述了近年来BC合成菌种筛选的研究现状;分析了BC在透气、吸湿排汗、力学性能和染色与脱色性能调控方面的进展情况;重点总结了BC基材料在抗菌、防紫外线、防辐射、防静电、拒水拒油、导电和传感等功能化改性方面的研究进展;最后,指出BC大规模高效成模和成型技术、差异化高功能BC材料制备技术是未来的重点研发方向.     

Thermoplastic Starch Nanocomposites Reinforced with Cellulose Nanocrystal Suspensions Containing Residual Salt from Neutralization

Sulfuric acid-catalyzed hydrolysis of cellulose commonly isolates cellulose nanocrystals (CNCs). Neutralizing the reactant solution with sodium hydroxide facilitates efficient downstream processing, but residual salt remains in the product. This study examines the reinforcing effects of CNCs from suspensions that contain residual salt on the mechanical properties of thermoplastic starch nanocomposites. By reinforcing starch films with up to 5 wt% CNCs, stiffness and strength are improved by 118% and 79%, respectively, indicating a good dispersion of CNCs in the starch matrix. Compared to nanocomposites incorporating salt-free CNCs, the remaining salt has no significant impact on the material's mechanical performance. The results indicate great potential of CNCs containing residual salt as biobased, low-cost nanofiller in hydrophilic polymer matrices.     

Facile Deposition of Silver Nanoparticles on Photonic Cellulose Nanocrystals Films: A Study on Solvent Stability and Post Antibacterial Activity

Cellulose nanocrystals (CNCs) incorporated with silver nanoparticles (AgNPs) photonic films have drawn considerable attention due to their plasmonic chiroptical activity. However, the exploitation of some fundamental properties for practical use such as the affinity analysis of metal nanoparticles attached to the surface of photonic films according to the solvent compatibility and antibacterial activity under physical conditions has yet not been studied. Hence, a facile process of in situ deposition of AgNPs into the chiral structure of CNC films is proposed. CNC photonic films, cross-linked by glutaraldehyde are prepared. This interaction generated the solvents-stable photonic film with a considerable amount of unreacted aldehyde functional groups that facilitates the reduction of Ag salt to AgNPs. The formed AgNPs in the photonic films show excellent stability over immersion in various polar and non-polar solvents. The post-solvent treated photonic films display excellent contact-based antibacterial behavior against gram-negative Escherichia coli.     

细菌纤维素合成过程中的影响因素

研究了接种量、pH值、培养液深度、培养液表面积和发酵时间等因素对形成细菌纤维素膜的产量、厚度及比表面积的影响。结果表明:接种量在7%、初始pH值在5～6范围内细菌纤维素的产量最大;厚度主要取决于发酵时间和初始pH值;培养液表面积对单位面积细菌纤维素产量有比较大的影响;膜的比表面积与发酵时间的长短无关。     

大豆蛋白/粘胶共混纤维的结构与性能

采用湿法纺丝制备大豆蛋白/粘胶共混纤维,分析测试了共混纤维的结构形态与物理机械性能的关系,并与其他类型的蛋白质改性纤维进行了比较。实验结果表明共混纤维的力学性能与蛋白质比例有关,随着蛋白质质量分数的增加,纤维的强度降低;共混纤维的截面形状和黏胶纤维相似,但表面沟槽更为明显。