Scale‐up and Spouting of Two‐Dimensional Beds

The objective of this paper is to present an analysis on the scale‐up procedure of two‐dimensional spouted beds. The task was carried out with three different beds measuring 0.15, 0.30 and 0.80 in width. The conditions of scale‐up were studied through geometrical similitude analysis. Some parameters of scale were adimensionalised, tested and validated in order to propose relationships capable of predicting values of dependent properties. Those relationships should be followed in a prototype of an equipment of industrial scale. The study permitted the development of correlations to predict values of maximum pressure drop, minimum spout velocity and maximum height of spouting.     

正确处理三种关系,促进测量学教学健康发展--非测绘专业测量学的教学研究

结合教学实践，对如何正确处理好教学与科研、传统技术与新技术、传统教学与多媒体教学之间的关系进行了研究，并得出正确处理好这三种关系是促进测量学教学健康发展和提高教学质量的有效途径的结论。     

A Simple Experimental Technique to Measure Tortuosity in Packed Beds

In this article, a simple and inexpensive experimental technique easy to build in laboratory, for the measurement of tortuosity of a packed bed of inert particles, is described. Experimental values of the tortuosity were obtained with four different packed beds of sand. The experimental results obtained are in good agreement with the theoretical values of tortuosity in a porous media; and the data reported showed the tortuosity to increase with decrease in the void fraction of the packed bed as expected.     

浅谈语文教学中的形象思维

形象思维足语文教学内容的一个重要组成部分,是语言表达的基础.语文课应该重视对学生形象思维的培养与训练.     

物理化学课程教学方法探讨

物理化学课程的教学有它自身的特点,根据其特点从多方面、多视角探索了物理化学课程教学的教学方法,并在实践中获得了良好的教学效果。     

大学教学价值取向的生存论反思

在生存论看来，以实存论为基底的大学教学价值取向，遗忘了追问人的生存意义。实际上，生存意义是在欲、技、道的游戏中生成的。大学教学价值向“寻求意义”的转向，实质上是“理智培育”、“技术培训”、“情感培养”三类传统价值取向在当代的共同表现形式．而非彼此对立。     

Design development of a static sunshade using small scale modeling technique

The rising global demand for energy has triggered emphasis on conservation of energy. Buildings are one of the important energy consuming sectors. Passive solar architecture encompasses a wide range of strategies and options resulting in energy efficient building design and increased occupant's comfort. Passive solar design, aiming at increasing direct solar gains during winter period and to avoid overheating during summer period should make use of specific shading devices over energy efficient window. The static sunshades are most effective for solar control inside the buildings.Countries like India have composite climate, which can be classified under summer, winter and rainy season. Depending on the seasonal requirements, this paper introduces a new geometry of a static sunshade, designed by calculating the sun angles for the two dates. The static sun shading design methodology is validated with the help of small scale modeling experimentation technique, carried out in Pilani, Rajasthan (India). Although insulating materials can be used as a part of a building structure, its feasibility should be checked before particular application. In the present paper, the two small-scale experimental models of actual construction material with varying static sunshades, i.e. horizontal and the proposed one have been constructed and analyzed with the models of insulating material (Polyurethane Foam [PUF]). Depending upon the solar intersection over south facade wall, sunlit area and shaded area have been correlated with temperature inside the models to decide the effectiveness of the proposed sunshade.     

Green Tax Reforms and Computational Economics A Do-it-yourself Approach

The double or even triple dividend hypothesis of green tax reforms has beena major issue of dispute in both the scientific community and the politicalarena during the last decade. Theoretical analysis has provided a number ofimportant qualitative insights to the debate but lacks of actual policyrelevance due to very restrictive assumptions. Applied research that takes thestep from stylized analytical to complex numerical models usually comes as ablackbox to non-expert modelers. This paper aims at bridging the gap betweenstylized theoretical work and numerical analysis. We develop a flexible,interactive simulation model which is accessible underhttp://brw.zew.de. Users can specify their own green tax reforms andevaluate the induced economic and environmental effects. Based on illustrativesimulations, we demonstrate the usefulness of our do-it-yourself approach fora better understanding of the double (triple) dividend hypothesis.     

冶金烧结强化盘式钻头齿圈的试验研究

在分析盘式钻头齿圈失效机理的基础上,提出了齿圈表面堆焊耐磨合金强化和镶嵌硬质合金齿圈强化两种方法。通过试验研究和对比分析,确定了采用冶金混合烧结固齿法镶嵌硬质合金齿圈强化盘式钻头。进一步的试验研究表明:采用冶金混合烧结固齿法镶嵌硬质合金齿圈来强化盘式钻头齿圈,其结合情况非常好;硬质合金齿圈的硬度、耐磨料磨损的能力和耐冲击磨料磨损的能力在烧结后都有进一步的提高,说明采用冶金混合烧结固齿法镶嵌硬质合金齿圈来强化盘式钻头齿圈是可行的。     

多媒体技术在化学教学中应用的探讨

文中介绍了多媒体教学的发展及多媒体课件、文献资料和仿真实验等教学的基本形式;分析了多媒体教学所具有的信息量丰富、表现力多样化、交互性较强和内容更新快的特点;讨论了多媒体教学可提高教学效率、提高学生理解能力、减轻教师负担和因材施教的优越性;提出了在教学中应用多媒体技术时,应以学生为主体,教师为主导,为学习者提供认知帮助是关键而有效策略的教学思想。