四倍频Nd：YAG激光在高压氢气中的喇曼频移研究

利用Nd:YAG固体激光器四倍频输出(266nm)在高压H₂中的受激喇曼散射获得多波长的激光输出。当泵浦能量一定时,通过改变H₂压力得到了最佳的能量输出,299nm波长的激光能量为3mJ,341nm波长的激光能量输出为6.1mJ,398nm波长的激光能量输出为2.8mJ,239nm波长的激光能量输出为0.8mJ,同时在477nm,595nm,218nm,200nm波段也有能量输出。     

震源延迟叠加技术及应用效果

延迟叠加爆炸是针对高分辨率和深层地震勘探而提出来的一种激发方式。这种激发方式能在保证地震分辨率的前提下有效提高地震波能量 ,在地震波的入射角范围内 ,有效克服非球形炸药激发引起的地震波传播的方向性。应用弹性波动力学对多级延迟爆炸进行理论研究 ,结合实际试验资料 ,研究了延迟爆炸情况下激发参数对地震波能量、主频、频宽等的影响。从几何地震学出发 ,分析了不同时间激发的地震波在地下空间中的干涉情况 ,对其能量传播的方向性进行了研究。理论分析和试验效果表明 ,延迟叠加震源与相同药量的普通震源相比 ,激发地震波的主频高 ,频带宽 ,增强了下传能量 ,降低了次生干扰 ,在高分辨率和深层地震勘探中具有明显的优势。     

Optical scattering in beef steak to predict tenderness using hyperspectral imaging in the VIS-NIR region

The objective of this research is to develop a non-destructive method for predicting cooked beef tenderness using optical scattering of light on fresh beef muscle tissue. A hyperspectral imaging system (λ = 496–1,036 nm) that consists of a CCD camera and an imaging spectrograph, was used to acquire beef steak images. The hyperspectral image consisted of 120 bands with spectral intervals of 4.54 nm. Sixty-one fresh beef steaks, including 44 strip loin and 17 tenderloin cuts, were collected. After imaging, the steaks were cooked and Warner-Bratzler shear (WBS) force values were collected as tenderness references. The optical scattering profiles were derived from the hyperspectral images and fitted to the modified Lorentzian function. Parameters, such as the peak height, full scattering width at half maximum (FWHM), and the slope around the FWHM were determined at each wavelength. Stepwise regression was used to identify 7 key wavelengths and parameters. The parameters were then used to predict the WBS scores. The model was able to predict WBS scores with an R = 0.67. Optical scattering implemented with hyperspectral imaging shows limited success for predicting current status of tenderness in beef steak.     

退火炉保护气氛的安全控制

钟罩室退火护采用微压氢气作为保护气体，炉内压力的监控是保证安全生产不可忽视的必要手段，该文针对该公司选用的国产钟罩式退火护作了简要介绍，对国产钟罩式退火炉压力监控系统作了分析，指出了存在的缺陷，提出了改进措施。     

爆炸预处理提高D级船板(WD钢)模拟CGHAZ韧性的研究

运用示波冲击和维氏硬度试验、扫描电镜断口和电子探针能谱分析、图象仪测定等手段研究了爆炸预处理对WD钢模拟CGHAZ韧性的影响，发现爆炸预处理具有显著提高WD钢大线能量(50kJ／cm)模拟CGHAZ韧性的效果，提高幅度达118％，其原因在于细化原奥氏体晶粒，生成了较多的先共析多边铁素体，软化了组织。     

Influence of zero-loss filtering on electron optical phase contrast

Complex scattering amplitudes are used to calculate the phase contrast of colloidal gold particles. Comparison of measurements of the phase contrast intensity at the centre of the gold particle as a function of defocus for unfiltered and zero-loss filtered images demonstrates the increase in phase contrast achieved by zero-loss filtering even for a thick carbon substrate film. The granulation of amorphous germanium films is measured by the spatial rms (root mean square) values of image intensity in a defocus series.     

Influence of Two Salicylate Components on the Particle Size of an Oil-in-Water Emulsion with Nonionic Surfactants

This paper reports a study undertaken using techniques of static and dynamic light scattering to investigate the influence of sodium salicylate and methyl salicylate on droplet size of oil-in-water emulsions. The rates of changes were measured by determining the size and distribution of the oil droplet in the material. All emulsions showed a bimodal size distribution; the mean diameters and polydispersity were calculated from intensity. These data were analyzed with nonlinear regressions and bootstrap methodology. An amount of methyl salicylate component induced a decrease of mean diameter and standard deviation. On the contrary, sodium salicylate entailed the growth of all droplet populations and coalescence for the highest concentration.     

Numerical simulation and error analysis for thermal diffusivity measurements using laser-induced thermal grating technique

The laser-induced thermal grating technique has been used to determine the thermal diffusivity of liquids and liquid mixtures. But the dynamic behaviour of the transient thermal grating has not yet been thoroughly investigated, and the systematic errors, which result from the departures from one-dimensional heat conduction, have scarcely been studied quantitatively. In this paper. a three-dimensional numerical simulation and results of the transient thermal grating technique are presented, which enable a good understanding of the dynamic behaviour of the transient thermal grating. The results of this simulation are important for the proper design of the experimental setup to keep the systematic errors for the diffusivity measurement small. Based on the simulation method, the systematic errors were analyzed quantitatively. Here, the following effects were studied: (I) sample thickness, (2) intersection angle, (3) absorption, (4) Gaussian beam intensity distribution and focusing of heating laser beam, and (5) heating pulse duration and laser power. This error analysis makes it possible to specify the criteria for optimum measuring conditions, to correct the measured thermal-diffusivity values for systematic errors, and to estimate the accuracy of the measurements.     

影响DT岩石粉状铵梯炸药爆速的因素探索

文章从ＤＴ岩石粉状铵梯炸药的原材料细度，复合油相，混药时间，投料顺序，混药药温，装药密度等方面，探讨了该炸药爆速的影响因素。