沙袋充填度与稳定性的试验研究

沙袋筑坝在工程中愈来愈广泛的应用，需要解决的问题也很多，笔者对不同尺寸沙袋的充填度进行了讨论，提出了极限充填度和最佳充填度的概念；通过对不同尺寸充沙沙袋在水泥抹面和沙袋布为底面的水槽中所得的试验资料的分析，得出了充沙沙袋的失稳流速。     

An investigation of the unstable region for dense phase conveying in sliding bed flow

For fine powdered materials, capable of being conveyed in dense phase, a conveying region exists in which instability in flow and pipeline blockage can occur if the pressure gradient available is insufficient to maintain a minimum value of solids loading ratio. A reduction in material flow rate can also lead to pipeline blockage in this region. Conveying trials under-taken with cement are used to illustrate the nature of the problem.     

基于SHARC数字脉压系统的设计与实现

详细介绍了采用两片浮点DSP ADSP21062实现某舰载雷达所需要完成的舰速补偿、反异步干扰和脉冲压缩的系统研制。通过采用分段匹配滤波的方法，极大地节约了时间和空间。与完成同样功能采用单片TMS320C6701的设计相比，本设计具有外围电路简单、系统调试容易等优点。     

考虑弯道环流影响的平面二维水流泥沙数学模型

弯道环流是影响断面流速和含沙量分布的重要因素。本文提出了通过求解立面二维弯道环流运动的方法,在平面二维水流泥沙数学模型中考虑弯道环流的作用。该方法适用范围广,增加计算工作量不太大。     

A simple correlation for gas bubbles rising in power‐law fluids

Recently, the author (Rodrigue, 2001 a, b) proposed a generalized correlation for the steady rise of gas bubbles in uncontaminated viscous Newtonian fluids of infinite extent. It is the purpose of this note to show that this model can be modified for inelastic non‐Newtonian power‐law fluids. Using data taken from six different studies, it is shown that the modified model can predict quite nicely the bubble velocity for these non‐Newtonian inelastic fluids.     

Prediction of axial velocity profiles and solids hold-up in a rotary kiln

Axial bed depth profiles were experimentally measured in a rotary kiln containing ilmenite particles under steady state and transient conditions. The variables include feed rate of solids, inclination and rotational speed of the kiln. and dam height. The variation of the axial velocity with kiln axis was estimated. The semi-experimental model proposed by Perron and Bui (1990) was modified to include the effect of the variables of the present study. The mean residence time of solids was estimated from the fractional hold-up and expressed in terms of the process variables. The transients induced by a step change in any of the operating conditions were measured as variation of discharge rate of solids with time.     

外焊缝自动跟踪系统

介绍了外焊缝自动跟踪系统的组成及工作原理，简述了传动部分ＧＴＲ－ＰＷＭ调速系统，给出了系统的硬件电路。该跟踪器具有结构简单，体积小，性能稳定等特点，在生产线上获得了成功的应用。     

低速爆轰管对黑火药的点传火性能研究

文章采用中心点火管结构的实验装置研究了黑火药的点传火性能。用低速爆轰 (L VD)中心点火管来点燃黑火药时 ,1# ～ 3# 大粒黑药的传火速度为 70 0 m· s-1～ 80 0 m· s-1数量级 ,燃烧波宽度在 3.1ms～ 3.5 ms,最大压力峰值 :1# 为 36 .4 MPa,2 # 为 2 4 .0 MPa,3# 为 38.0 MPa。用普通中心点火管点燃黑火药时 ,2 # 、3# 和钝化 2 # 大粒黑的传火速度分别为 6 1.2 m· s-1、6 8.2 m·s-1和 4 0 .1m· s-1,最大燃烧波宽度分别为 9.2 ms、6 .3ms和 9.5 ms。燃烧波表明 ,L VD中心传火管与普通中心传火管相比较 ,在传火管的不同位置处 ,前者的 P- t曲线一致性远高于后者。     

利用短周期地脉动推断深层地基S波速度

从二维随机波场的相关理论出发，提出了如何从短周期地脉动（频率＞０．５Ｈｚ）时域信号中计算Ｒａｙｌｅｉｇｈ波弥散曲线，进而反演深层地基剪切波（Ｓ波）速度的理论方法和分析技术，并结合实测信号的分析结果，探讨了该方法的可行性和实用性。