提高热镀锌钢管外观质量的方法

分析了热镀锌钢管的镀锌层结构,化学成分,热镀锌台金和工艺操作等对钢管外观质量的影响,并提出了相应的解决措施。     

TiAl合金精密铸件缩孔的定量预测

研究了TiAl合金叶片铸件液态熔池孤立区形成的判定方法及缩孔的预测模型，对缩孔形成过程进行了模拟显示。研究表明，利用这种方法模拟缩孔缺陷可以提高铸件模拟缩孔预测精度。     

Bubble Formation at a Rotating Cylindrical Surface in Cross‐Flowing Liquid

A novel method of gas sparging from a rotating cylinder is proposed, which prevents against formation of large attached gas cavities in cross‐flowing liquids including those flowing downwards. Experimental and theoretical results regarding critical rotation speed necessary to remove the attached cavity, bubble formation process and size distribution of the produced bubbles in a low viscosity system (air‐water) are presented in this study.     

A novel method for camera external parameters online calibration using dotted road line

On board camera is the most important information source for driver assistant application which is based on computer vision. One problem for on board camera is that the external parameters are easy to be changed when moving on the road. Traditional method either calibrates external parameters offline or calibrates external parameters semi-online, which both need human intervention. By observation, it is found that corner connection of dotted road lane can form two groups of parallel lines. Using this geometric characteristics and through theoretical derivation, a novel online camera external parameter calibration method is proposed which focus on the situation when vehicle is moving. The pro of this method is that it maintains relatively high calculation accuracy and more important, it does not require any human intervention in whole calibration process. Experimental and comparison results show that this method is simple and have accurate results which fully meet the requirements of practical application.     

基于自由运动一维标定物的多摄像机参数标定方法与实验

一维标定方法易于实现且标定效率高,为了克服现有一维标定方法的一些不足,本文提出一种用一维标定物标定多摄像机内外参数的方法,首先进行两两标定,在此过程中,假定主点坐标近似已知而仅考虑畸变、焦距、旋转和平移等参数,接着利用基本矩阵及一维标定物上特征点之间的几何约束,估计两摄像机的内外参数,两两标定完成后,采用Dijkstra最短路径法和捆绑调整对多摄像机系统进行全局标定(含主点坐标),仿真和真实实验表明本文的方法是切实有效的.     

Phosphate sorption approach for determining phosphorus requirements of wheat in calcareous soils

Five field experiments involving P application rates from 0 to 66 kg P ha^–1 were conducted on irrigated wheat at Tandojam, Pakistan. The soils belonged to two great soil groups, Torrifluvent and Camborthid. All soils were calcareous. Olsen-P contents ranged from 3.5 to 6.3 mg P kg^–1. Phosphate sorption curves were developed for soils from control (no P) plots at each site. Concentrations of P in solution established by fertilization in the field as estimated from the sorption curves ranged from 0.008 to 0.16mg P L^–1. Actual grain yields were converted to relative grain yields and plotted against corresponding concentrations of P in solution. Yield response to P application was obtained in each experiment. Control plot yields ranged from 57 to 89% of maximum yield of respective experiments. Phosphorus requirements of wheat were 0.032 mg L^–1 for 95% yield as determined from a composite yield response curve. Predicted quantities of P required to attain 0.032 mg P L^–1 ranged from 18 to 29 kg P ha^–1. The results of the study suggest that the P sorption approach can be used as a rational basis for making P fertilizer recommendations for various soil-crop combinations.     

型腔体组件装配尺寸检测技术分析与运用

为解决型腔体组件装配尺寸的检测问题,以某枪型的型腔体组件为例,分析该型腔体组件的结构特点,设计组合型检测装置,实现准确检测目的.归纳总结了型腔体组件装配尺寸检测技术运用过程中检测装置的设计要领,采用设计与被测型腔体组件相匹配的组合型检测装置,有效解决了型腔体组件装配尺寸检测过程中的定位困难、操作繁琐、检测准确性差等问题.该检测技术对确保型腔体组件装配尺寸的检测稳定性、检测可操作性、检测准确性等方面具有现实的指导意义.     

40%毒死蜱微乳剂的高效液相色谱法分析

采用ODS–C18反相色谱柱,用高效液相色谱法测定40%毒死蜱微乳剂制剂含量。方法的相关系数为0.9998,标准偏差为0.0242,变异系数为0.06%,平均回收率为98.6%。     

Predicting external sulphur requirement of alfalfa from sulphate sorption isotherm of Tanzanian soils

For Tanzanian soils dominant in hydrous oxides of iron and amorphous ferri-alumino silicate, a 48-hour (hr) mixing period with the sulphate (SO₄) solution was adequate for a near-equilibrium condition. Although differing in their SO₄ sorption capacity, all the soils sorbed SO₄ at or beyond 1µg ml^–1 sulphur (S) concentration in the supernatant. Hydroxyl (OH) ions were displaced during SO₄ sorption as indicated by a significant positive correlation between the amount of sorbed SO₄ and the difference in pH values determined in 0.1N K₂ SO₄ and 0.1N KCl, i.e. the dpH values.In a greenhouse experiment, alfalfa was grown on eight soils at six adjusted S concentrations. Sulphur deficiency symptoms appeared in the control pots of those soils which were low in native sorbed SO₄, SO₄ sorption capacity and initial soil solution S concentration. Sulphur fertilization increased dry matter (DM) yield as well as response to applied S. The external S concentration, i.e. adjusted S concentration required for 95% of the maximum DM yield, ranged from 0.8 to 8.2µg S ml^–1 with values less than 2.0 on most of the soils. The external S concentration decreased hyperbolically as the SO₄ sorption capacity of the soils increased. The total amount of fertilizer S required to obtain the external S concentration in solution, and at the same time satisfy the SO₄ sorption capacity of the soil at the external S concentration (determined from the sorption isotherm) was defined as the external S requirement for the specified yield level of alfalfa. The external S requirement for 95% of the maximum yield of alfalfa varied from soil to soil due to differences in their capacity and intensity for S nutrition.Part of a thesis by the senior author for the MSc (Agric) degree of the University of Dar es Salaam     

鼠标的组合型腔浇注系统优化设计

本文将注塑系统平衡的理论和数值模拟技术紧密结合起采，研究鼠标组合型腔的浇注系统。如果熔体不能同时到达各浇口并充满各个型腔，将导致压力分布不均匀，使制品的质量下降，以至于出现充不满等问题，本研究对浇注系统优化，得出了一组最佳的浇注系统方案，从而保证熔体能够基本上在同一时间充满型腔，实现熔体的平衡流动。从分析结果可知，要平衡熔体在组合型腔内的流动，分流道的截面形状和尺寸起到非常大的作用。