Evolution of microstructure and properties of internal nitride dispersion strengthened alloy before nitriding

Internal nitride dispersion strengthened superalloy is a new type of high performance superalloy for combustion chamber. The background and development of this alloy were firstly introduced. And then the microstructure and properties of NS163 which is a typical internal nitride dispersion strengthened alloy were investigated. The results show that the microstructure of NS163 is simple in the temperature range of 900??1250??, which is composed of austenite matrix and MC carbide. The recrystallization behavior of the cold- rolled sheet under the test condition was studied systematically. It is found that the solid solution temperature of the finished product should be 1200??, and after solid solution at 1200??, the sheet has 5 grade average grain size, excellent cold workability and low tensile strength at high temperature. The above results can help to optimize the microstructure of NS163 alloy sheet before nitriding and provide a basis for the evaluation of the strengthening effect of the alloy after internal nitriding.     

The extrapolated fully implicit scheme for the diffusion equation

The numerical solution of the diffusion equation with homogeneous boundary conditions is discussed with emphasis on the L-stable Lawson-Morris method (LMM) derived by the extrapolation of the fully implicit backward difference method. This type of scheme is particularly suitable when there is an initial/boundary discontinuity. In this paper, a scheme which improves the accuracy of LMM is proposed and discussed.     

Measuring the human body's microclimate using a thermal manikin

The human body is surrounded by a microclimate, which results from its convective release of heat. In this study, the air temperature and flow velocity of this microclimate were measured in a climate chamber at various room temperatures, using a thermal manikin simulating the heat release of the human being. Different techniques (Particle Streak Tracking, thermography, anemometry, and thermistors) were used for measurement and visualization. The manikin surface temperature was adjusted to the particular indoor climate based on simulations with a thermoregulation model (UCBerkeley Thermal Comfort Model). We found that generally, the microclimate is thinner at the lower part of the torso, but expands going up. At the head, there is a relatively thick thermal layer, which results in an ascending plume above the head. However, the microclimate shape strongly depends not only on the body segment, but also on boundary conditions: The higher the temperature difference between the surface temperature of the manikin and the air temperature, the faster the airflow in the microclimate. Finally, convective heat transfer coefficients strongly increase with falling room temperature, while radiative heat transfer coefficients decrease. The type of body segment strongly influences the convective heat transfer coefficient, while only minimally influencing the radiative heat transfer coefficient.     

Buckling analysis of the shell of a refuge chamber in a coal mine under uniform axial compression

A stiffened cylindrical shell is normally used in refuge chambers of a coal mine.Based on the method of application and shape characteristics of a refuge chamber,we simplified its shell as an orrhotrop...     

阀室引压管放电烧蚀失效分析

近年来,我国油气管道沿线阀室遭受的交、直流电干扰日益严重,由此引发的阀室引压管放电烧蚀问题逐渐凸显,亟需开展相关研究来弄清阀室引压管放电烧蚀的规律和机制。为此,以西气东输天然气管道某阀室引压管的放电烧蚀为例,搭建了实验室放电烧蚀平台,采用实验室模拟实验、微观分析以及现场测试相结合的方法,对该阀室引压管放电烧蚀的规律和机制进行了研究。结果表明:(1)当两根引压管间的交直流电压差大于4 V且存在接触引弧时便可以观察到明显的放电现象;(2)随着引压管间电压差和回路电流的增大,其能量升高,引压管放电烧蚀越严重;(3)直流放电烧蚀情况下阴、阳极呈现出明显不同的烧蚀形貌,阳极区烧蚀更加严重,其烧蚀坑呈现凹坑且烧蚀坑中没有明显的烧蚀产物沉积,阴极区烧蚀深度较浅,表面沉积一层烧蚀产物,而交流放电烧蚀情况下阴阳极烧蚀区域形貌基本一致,无明显差异。结论认为:该阀室的引压管放电现象是一种弧光放电,可以通过固定引压管、增大引压管间距以及阀室的交直流排流等措施来避免该现象的发生。     

Electrostatic K-Feldspar/Na-Feldspar and Feldspar/Quartz Separation: Influence of Feldspar Composition

This article aims at contributing to the possibility of electrically separating K-feldspar/Na-feldspar and quartz/feldspar, investigating the behavior of mixtures composed of K-feldspar, Na-feldspar, and quartz concentrates. The findings highlight the importance of preheating the material and of interparticle contact. Tests conducted on binary mixtures of K-feldspar/Na-feldspar, K-feldspar/quartz, and Na-feldspar/quartz showed that it is possible to achieve satisfactory results in the separation of these species, by triboelectrical charging of the material, preheated to temperatures above 100°C, using a free fall chamber. Tests carried out on ternary mixtures have demonstrated that additional pretreatment with HF solutions improves the results.     

Numerical study on erosion of a pipe bend with a vortex chamber

Abrasive erosion at bend is a common issue in gas–solid pneumatic system. Vortex chamber design is one of the specialized designs that offers promising prospect at reducing erosion. The performance of design is still relatively unknown in the literature. The aim of this work is to study the effect of basic erosion variables such as the flow Reynolds number, the particle Stokes number, and the vortex chamber size. The results show that the vortex chamber always reduces the erosion in comparison to the common radius bend, and it is more effective at higher Reynolds number. Increasing the chamber size reduces the erosion but the most significant reduction happens when the chamber size to the pipe diameter ratio is increased from 1 to 1.25. The chamber size influences the erosion differently at different Reynolds number. Trends describing these effects were obtained through trial-and-error approach. The particle Stokes number has nonunique effect on erosion. Increasing Stokes number through increasing Re increases the erosion while increasing Stokes number through decreasing Re_p decreases the erosion.     

A Low‐Cost Method to Evaluate Absorber Reflectivity Using an Antenna with a Small Radiating Aperture and Frequency‐Domain Instrument

We propose a way to measure the absorber reflectivity at a low cost. Only one simple antenna with a small radiating aperture and a frequency‐domain instrument are utilized. The previously used equation for calculating the reflectivity of an absorber is inaccurate, and, therefore, a new equation is derived based on multiple reflection analysis and three test models. Notably, the reflection coefficient of the antenna is included in the derived equation. The accuracy of the proposed method is proven through simulation and measurements. It can be easily applied to a product examination by absorber manufacturers and customers owing to its advantages of simplicity, cost effectiveness, and non‐cutting examination.     

Comparison of different peeling systems for kiwifruit (Actinidia deliciosa,cv Hayward)

Galicia (N.W. Spain) produces 60% of Spanish kiwifruit (Actinidia deliciosa) and 5–20% of these are ‘destrío’ fruits, which do not reach market size and the appropriate form. These rejected fruits can be processed into products, thus increasing their added value. The processing of kiwifruit always includes a peeling operation, which can be performed by different systems. The most suitable conditions for caustic peeling and thermal peeling were established. Then, the two peeling systems were compared with manual peeling with the aim of selecting the best system to remove the peel of the ‘destrío’ kiwifruit. The fruits, once harvested, were stored in a cold chamber at 0 °C. Before processing or marketing kiwifruits, it is necessary to remove them from storage in cold chamber and storage at room temperature. In this study, different storage times at room temperature before peeling kiwifruits were also tested. The best system for peeling the kiwifruit was thermal peeling as this system resulted in the lowest weight loss and preserved the green colour characteristic of the kiwifruit. The best time for peeling the kiwifruit was after 8 days of storage at room temperature, after being removed from the cold chamber.