盾构用气泡的性能及对开挖土体改良效果影响

随着土压平衡式盾构在我国地铁建设中的推广应用,气泡作为一种优良的土体改良剂,已经得到广泛的采用。但是,我国对盾构用发泡剂的研究开发处于起步阶段,对盾构用气泡的基本性能及其对开挖土体的改良效果缺乏研究,造成土压平衡式盾构中气泡应用的浪费。作者通过室内试验,对气泡的基本性能进行了研究,并在现场试验中研究了气泡性能对开挖土体的改良效果;得出了气泡改良开挖土体的主要影响因素,对盾构用气泡在实际中的应用具有指导意义。     

Toward an understanding of how red phosphorus and expandable graphite enhance the fire resistance of expandable polystyrene foams

Flame retardant expandable polystyrene (EPS) foams were prepared by coating method. Red phosphorus (RP) and expandable graphite (EG) were chosen as the flame retardants to be coated on the surface of expanded PS beads. By the presence of 33 phr RP/EG with a mass ratio of 1:1, the limiting oxygen index of EPS foam could reach up to 26.9%, with V-0 rating obtained in UL-94 test. The peak heat release rate could also decrease to 180.67 kW/m², which was 72.9% lower than that of neat EPS sample. Thermogravimetric analysis revealed an obvious increase of thermal stability and residue char amount by the presence of RP and EG. From the observation and analysis of char residue, it could be proposed that there existed a significant synergistic effect between RP and EG. RP could be oxidized and further react with graphite by the presence of oxygen at high temperature, forming isolated char layer and releasing nonflammable gases. Moreover, P radicals were generated at high temperature and could capture the radicals formed during the combustion of polystyrene and eliminate the burning chain reactions.     

Effect of gas-phase tortuosity on the mechanical properties of low-density polyolefin open-cell foams at low- and high-strain rates

This paper describes the mechanical behavior in compression, at both low- and high-strain rates, of several low-density open-cell polyolefin-based foams with different gas phase interconnectivities and different levels of gas-phase tortuosity. The mechanical properties of the open-cell polyolefin foams have been compared with two different references: an open-cell low tortuous foam based on flexible polyurethane and closed-cell polyolefin foams. One the one hand, at low-strain rates, it has been observed that the mechanical performance is controlled by the open-cell content and the properties of the polymeric matrix, being the influence of tortuosity small. On the other hand, the influence of the level of tortuosity is critical to high-strain rates. In fact, it has been demonstrated that open-cell polyolefin foams with high tortuosity (HT) present an unexpected mechanical behavior, showing excellent mechanical properties, which are even similar to that of closed-cell polyolefin materials with the same chemical composition. Therefore, low-density polyolefin foams with HT have a unique mechanical performance strongly influenced by the strain rate. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48468.     

Enhanced airborne sound absorption effect in poly(vinylidene fluoride)/(K0.5Na0.5)NbO3-nanofiber composite foams

Introducing electrical conductive function to discharge local piezoelectric effect is found effective for improving airborne sound absorption performance. In this work, instead of conductive fillers, a composite with two piezoelectric materials with opposite piezoelectric responses was explored aiming at enhanced sound absorption effect. Open-cell poly(vinylidene fluoride)/(K_0.5Na_0.5)NbO₃ (PVDF/KNN)-nanofiber composite foams were proposed and investigated for airborne sound absorption purpose. Structural and thermal analyses showed that the KNN nanofibers were well dispersed in the PVDF matrix and enhanced the degree of crystallinity of polar phase of PVDF. Significantly enhanced airborne sound absorption over a broad frequency range was observed in the PVDF/KNN-nanofiber composite foams, with increasing KNN nanofibers. One possible mechanism for the improved sound absorption with the piezoelectric KNN nanofibers with positive piezoelectric coefficient added in the PVDF matrix with negative piezoelectric coefficient is that electrical discharge could be facilitated for energy dissipation with the opposite charges generated through the piezoelectric effects in the two phases with opposite polarity. The experimental results show that the open-cell PVDF/KNN-nanofiber composite foams are promising for broadband airborne sound absorption application, and our analysis shed a light on the strategy in designing piezoelectric composite foam with high sound absorption performance.     

Improving the flame retardancy of polypropylene foam with piperazine pyrophosphate via multilayering coextrusion of film/foam composites

A series of 16-layer polypropylene/flame retardant (PP/FR) film/foam composite structures were produced by microlayer coextrusion. A highly branched PP was used in the foam layers to increase strain hardening and cell stability, while the PP used in the film layers was a high shear viscosity grade to confine bubble growth. In addition to improved tensile properties, the PP/FR composite film/foams exhibited five times the compression modulus of PP/FR composite foams at each FR loading level. The thermal stabilities of the composites were investigated, exhibiting three step decompositions. The FR particles were effective in decreasing flammability by forming intumescent char. The PP/FR-film/foam-20 showed self-extinguishing behavior in a modified vertical burn test, while the PP/FR-foam-20 sample continued to burn. Cone calorimetry demonstrated that PP/FR film/foams had lower heat release than PP/FR foams due to the unique alternating film/foam structure of PP/FR film/foams. Scanning electron microscopy imaging of the residual chars from fire testing that the PP/FR composite film/foams showed a more continuous protective char surface when compared with PP/FR composite foams at each FR concentration. The combined data indicate that the formation of a surface film on top of a foam ensures a robust intumescent fire protective barrier for partly foamed materials and shows a new way toward lightweight materials with improved fire safety performance. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48552.     

线性富磷化阻燃剂在聚氨酯泡沫中的应用研究

通过界面聚合法合成了一种线性富磷化阻燃剂（LPRFR）,将LPRFR与可膨胀石墨（EG）复配制备了阻燃聚氨酯泡沫（RPUF）,使用红外光谱分析仪、核磁共振分析仪对阻燃剂LPRFR的化学结构进行了表征,并通过极限氧指数仪、锥形量热仪、扫描电子显微镜和红外光谱分析仪对RPUF的燃烧性能、微观形貌和化学结构进行了分析。结果表明,仅10 %（质量分数,下同）的LPRFR 与8 %EG复配后,RPUF的极限氧指数（LOI）便达到26.1 %;LPRFR和EG能大幅降低RPUF的热释放速率,并提高基体的成炭能力; LPRFR参与了燃烧过程中的成炭反应,形成了含P—O—C及P=O结构的高质量炭层,有效隔绝了氧气和热量;LPRFR是一种对于聚氨酯泡沫阻燃性能优异的新型阻燃剂。     

Design and synthesis of foam glasses from recycled materials

Recycling has emerged as an environmental key point due to the diminishing of natural resources and the generation of ever-increasing amounts of industrial solid wastes. Glass wastes are among the materials that attract great interest in the recycling concept. This work presents the results of foams production from four series of compositions. The first series comprises powders of a sodium-calcium-silicate sheet glass cullet as the main component, an alkali-earth aluminosilicate glass as an additive, and a reagent grade silicon carbide (SiC) powder as gassing agent. In the second series, the glass cullet was used in combination with fly ashes (FLA) as main components, while SiC waste from abrasive paper served as foaming agent. In the third and fourth series, carbonates (calcite and dolomite) were used for foaming powder mixtures composed of sheet glass cullet and FLA, and powdered cathode ray tube panel glasses, respectively. All the processing parameters, including the main components, the nature and content of foaming agents are shown to play a crucial role on the foaming ability and final properties of the glass foams.     

高温型α-淀粉酶对膨化米粉冲调性的影响

研究了在双螺杆挤压系统下应用高温型α-淀粉酶制备和改善膨化米粉冲调性能的工艺和方法,并比较了加酶挤压前后DE值、结块率、黏度、色泽的变化。结果显示,在挤压过程中添加高温型α-淀粉酶,可以提高原料淀粉的降解程度,产品在冲调复水时,膨化米粉的结块率降低。通过响应面优化实验,得到了添加高温型α-淀粉酶制备膨化米粉最佳挤压工艺条件:挤压温度136.2℃,螺杆转速100 r/min,加酶量36.35 u/g。在此条件下所得膨化米粉与未加高温淀粉酶的米粉比较,产品DE值由1.06上升到13.58,结块率由32.0%下降到11.25%,冲调后的黏度由113.9 mPa.s下降到88.6 mPa.s,产品色度△E值与对照样基本一致,冲调性得以改善。     

阻燃聚氨酯软质泡沫塑料中氯含量的测定

叙述了阻燃聚氨酯软质泡沫塑料中氯含量的测定方法:在助燃剂存在下,氧瓶燃烧使聚氨酯软质泡沫塑料中的有机氯转化为HCl,用稀NaOH吸收,使用硫氰酸汞分光光度法测定聚氨酯软质泡沫塑料中阻燃剂的氯含量。该方法简单快捷、精确度高,回收率为99.64%～102.41%。     

Foaming of EPDM with water as blowing agent in injection molding

Chemical foaming of elastomers is state of the art and preferred to the more complex systems engineering of physical foaming, yet, many commonly used chemical blowing agents often are hazardous. In current investigations, we introduced water bound to carrying substances (silica, carbon black) into elastomer compounds. A stable, reproducible foaming process can be implemented using water as physical blowing agent. In first tests, the average cell diameters in injection molded elastomer parts exceed the average cell diameters of chemically foamed parts. Yet, varied amounts of blowing agent can reduce the cell diameters. Furthermore, nucleating agents and water carriers are being examined to reduce cell diameters and reach cellular structures and mechanical properties of chemically foamed parts. In conclusion, foaming of elastomers with water is a promising. Yet, further examinations have to cover the effect mechanism of foaming and vulcanization as well as continuous processing and compounding. Rear end of an EPDM part foamed with water carried on silica in injection molding process (mold temperature 195 °C, breathing mold opening 2 mm) © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43613.