On the ‘curiosity’ of electrical self‐heating,static charge and electromagnetic shielding effectiveness from carbon black/aluminium flakes reinforced epoxy‐resin composites

This paper shows the wide application range (such as electrical self‐heating and electromagnetic shielding effectiveness) of composites consisting of conductive carbon black/aluminum flakes (CBA) filler and epoxy insulative matrix. The effect of CBA content on the network structure of epoxy matrix was investigated in detail. Static electrical conductivity increases linearly with the increase of filler concentration at the interface in epoxy composites. The large decrease of the conductivity as a function of the temperature is analyzed in terms of the negative temperature coefficient of conductivity (NTCC) effect. The influence of viscosity, surface energy and barrier highest energy on the NTCC behaviour in the composite is also considered. Based on these results, a new interpretation is proposed to explain the NTCC phenomena by computing the swelling force among conductive phases. The correlations of conductivity during the temperature cycling and activation energy were analyzed. The effects of dynamic ageing at various temperatures on the resistivity are reported. Current–voltage–temperature characteristics for epoxy with different contents of CBA were examined in detail. A model based on the law of energy conservation is proposed to calculate the specific heat and amount of heat dissipation. The static charge of the epoxy–CBA composites was estimated. The correlation between electromagnetic wave‐shielding effectiveness (EMS), conductivity and frequency of epoxy composites with different filler contents is also discussed. Furthermore, the effect of annealing on EMS of epoxy composites was examined. © 2002 Society of Chemical Industry     

复合型导电塑料的研究进展

介绍了复合型导电塑料的种类。特性与应用，讨论了它们的导电机理及影响导电性的因素。着重全叙述了国内外对添加抗静电剂、导电填料以及共混复合型导电塑料的研究现状与发展趋势。     

Melting aspects of filled compounds in a modular co‐rotating twin screw extruder

In the polymer industry, precompounded materials are widely used. Carefully designed melting experiments were carried out to investigate melting mechanisms in master batched polymer compounds, using an intermeshing co‐rotating twin screw extruder. Calcium carbonate or aluminum powder was master batched with linear low‐density polyethylene (LLDPE). The calcium carbonates, which were used in the compounds, have differences in weight fraction and particle size. The compounds containing filler have higher thermal conductivities and viscosities than neat polyethylene. We observed melting initiation and propagation mechanisms of LLDPE compounds by removal and characterization of polymer compound carcasses in the melting region. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1990–2012, 2006     

Effect of filler network on dynamic viscoelastic properties of uncured polymethylvinylsiloxanes filled with silica and carbon black

Dynamic properties of polymethylvinylsiloxane (PMVS) filled with filler‐blends composed of carbon black (CB) and silica (SiO₂) were investigated using an advanced rheometric expansion system. A variety of weight fraction of CB to SiO₂ were 0/100, 10/90, 30/70, 50/50, 70/30, 90/10, and 100/0, and a bifunctional organsilane, bis(3‐triethoxysilylpropyl)tetrasurfane, was used to facilitate the filler dispersion. The results reveal that the incorporation of CB/SiO₂ filler‐blends into PMVS result in a reduced Payne effect. This effect reaches a minimum when the ratio of CB/SiO₂ approaches 1, and then it began to rebound with the ratio increase. Meanwhile, a characteristic Newtonian viscosity plateau appearing in low frequencies also significantly decreases, depending on the amount of CB or SiO₂ added. On the basis of a simplified Fowke model, we ascribe this phenomenon to the deteriorated filler network, which is predominantly induced by the totally different surface activity between CB and SiO₂. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3477–3482, 2006     

填料对双组分缩合型室温硫化硅橡胶性能的影响

考察了多种补强填料和半补强(或增量)填料如硅藻土、碳酸钙和氧化铝等对室温硫化(RTV)硅橡胶的机械性能和介电性能的影响。结果表明,采用经六甲基二硅氮烷处理的气相法白炭黑或沉淀法白炭黑作填料时,RTV硅橡胶多方面的性能都有所提高;采用补强填料和半补强填料并用的RTV硅橡胶的性能优于使用单一补强填料的RTV硅橡胶;随着填料用量的增加,RTV硅橡胶的机械性能、相对介电常数和介质损耗因数都有一定程度的提高,但体积电阻率有所降低。     

脱硫灰与石灰石粉复合制备沥青填料研究

通过XRD及马歇尔稳定度试验等方法,研究把脱硫灰用作沥青复合填料。试验结果表明,以不大于40%的脱硫灰与石灰石粉复合可制备沥青填料,所制备的沥青混合料各项指标均能满足规范要求,可应用于沥青道路工程,其中以约30%脱硫灰取代石灰石粉所制备的复合沥青填料效果较好。     

乳胶涂料中填料粒径测定与分散剂的选择

介绍了重力沉降法和容量沉降法两种测定乳胶涂料中填料粒径的方法。通过比较粉体粒径结果显示：沉降法比激光法更形象直观，更能代表体系粒径真实情况。以滑石粉、重钙、轻钙粉体为基准，采用不同用量、不同类型的分散剂的容量沉降法进行比较得出：用容量沉降法能定量地对分散剂性能做出评价。     

粉煤灰作橡胶填料的影响因素

以钛酸酯偶联剂为表面处理荆，对粉煤灰进行表面处理，制得橡胶填料，测试了该填料对橡胶的补强作用。实验表明，表面改性后的粉煤灰对橡胶具有较好的补强作用。可完全替代碳酸钙、碳酸镁或陶土，产生较好的补强效果，用来替代部分发黑，可以减少发黑的用量，降低橡胶的成本。     

Efficiency of mineral admixtures in mortars: Quantification of the physical and chemical effects of fine admixtures in relation with compressive strength

This work is the fourth part of an overall project the aim of which was the development of general mix design rules for concrete containing different kinds of mineral admixtures. The two first parts presented the separation and quantification, by means of an empirical model based on semi-adiabatic calorimetry measurements, of the different physical effects responsible for changes in cement hydration (short terms) when chemically inert quartz powders were used in mortars. Part three dealt with an intensive experimental program, presenting and commenting more than 2000 compressive strength measurements. This program concerned 1 day to 6 months old mortars containing up to 75% of inert and pozzolanic admixtures. All these compressive strength results are analyzed in this fourth part and the influence of three effects, namely dilution, heterogeneous nucleation and the pozzolanic effect, are discriminated and quantitatively evaluated. An efficiency concept is proposed in order to take into account the effect of mineral admixture in mortars from both the physical and chemical points of view. It uses an efficiency function ξ(p) that has notable properties: it is independent of time, independent of fineness and independent of the type of mineral admixture.     

SEBS/PP共混材料的研究及其进展

SEBS是一种用途广泛的新型弹性体材料,在常温下具有高弹性,高温下可直接加工成型。由于SEBS具有优异的耐臭氧、耐氧化、耐紫外线和耐候性能等,因此,应用范围广于普通SBS材料。但是,SEBS耐溶剂性和耐油性较差,常通过与其他材料共混改性来增强其加工性能。文章重点概述了苯乙烯-乙烯-丁烯-苯乙烯(SEBS)与聚丙烯(PP)共混材料的微观结构、相容性以及结构与性能的研究进展,介绍了近年国内外SEBS/PP共混改性的研究成果,包括填充油、无机材料、PPO、PC和PA6等改性体系,并比较了这些改性技术对SEBS/PP共混体系微观结构及性能的影响,近年内,SEBS/PP共混材料的理论研究和工程应用会有长足发展。