瑞雷波勘探的f-k域能量最大模方法

瑞雷波的频散特性已在地震勘探及工程勘察等领域得到了大量应用,但目前存在一些问题亟待解决,例如当层状介质中存在低速层时,提取的频散曲线会发生"之"字形回折,利用传统的基阶模反演不能得到正确的结果.本文主要针对"之"字形频散曲线问题,提出f-k域能量最大模的概念,并成功地将最大模应用于频散曲线的f-k域提取及对地层结构的反演分析.通过反演模拟以及实测数据发现,最大模方法可以较好地解决基阶模反演所不能解决的"之"字形频散曲线反演问题.     

大掺量磷石膏用于路基填料的性能试验研究

为探索磷石膏大掺量、规模化、资源化利用路径,分别以自制固化剂和水泥为胶凝材制备大掺量磷石膏路基填料,开展大掺量磷石膏混合料的击实试验、无侧限抗压强度试验及疏水改性试验,分析大掺量磷石膏与自制固化剂和水泥的适配性、击实特性、强度特性、耐水性能。结果表明,采用水泥或自制固化剂改性磷石膏击实曲线呈单峰变化趋势,且含水率偏低时对大掺量磷石膏混合料的干密度影响较小;相同配比时,固化剂体系大掺量磷石膏混合料7d无侧限抗压强度是水泥体系的1.5倍以上,磷尾砂与自制固化剂的适配性优于黏土,且配比为90%磷石膏+10%固化剂的大掺量磷石膏混合料7d无侧限抗压强度度达3.4MPa,经疏水改性后强度提升至4.2MPa,疏水剂与自制固化剂的复配较好地改善了磷石膏自身亲水特性,提升了其水稳性能。     

Solvent Extraction Calculation Model for Purex Process in Pulsed Sieve Plate Column

A new calculation code PULCO has been developed to simulate the Purex extraction process in a pulsed column. The model for the PULCO code is based on the mass transfer taking place at the interface between dispersed drops and continuous phase fluid. The following physical quantities of the moving drop are included in the model for each period of drop motion in a pulsed column:

1. Mass transfer coefficient from liquid drop to continuous phase

2. Diameter and velocity of moving drop in the pulsed column

3. Holdup of dispersed and continuous phases in the pulsed column

4. Longitudinal dispersion coefficient in the pulsed column.

To establish the validity of the PULCO code, experiments were performed using a 50 mm diameter pulsed column which had a sieve plate section height of 2 m and plates spaced 50 mm apart. The experiments were performed by CY tests with use of unirradiated U and Pu. The experimental concentration profiles fitted well with the calculated concentration profiles.     

A priori risk-informed approach to ensure the compliance with discharge limits for liquid radioactive effluent to be discharged from APR 1400

ABSTRACT

In order to develop a methodology to guarantee the conformance to operational discharge limits for liquid effluent from a NPP at an early stage of design, a risk-informed approach was proposed and its applicability was verified for APR 1400. Existing methodology to calculate risk-based detection limit for a single radionuclide was improved by incorporating a new model to derive more realistic pathway dose factors. A new simple expression was also proposed to adjust risk-based detection limits for multiple radionuclides mixture if necessary. In addition, a new procedure to warrant the compliance with discharge limits by controlling detection limits of only a few principal radionuclides was established in accordance with risk-informed concept. Through case studies for APR 1400 to be commissioned at a hypothetical site, it was shown that calculated pathway dose factors are more realistic for majority of radionuclides. It also turns out that neither present detection limits nor unadjusted risk-based detection limits can be justified when the radionuclide composition is unknown, however further adjustment of detection limits or increasing additional dilution factor resolves the problem. Finally, ten principal radionuclides were identified and shown to be enough for liquid effluent control at APR 1400 from a risk-informed point of view.     

稀土磁性复合微球的制备及表征

以聚乙二醇磁性胶体粒子为种子 ,运用分散聚合法 ,同时掺入稀土离子 ,制备出表面配位有稀土离子的磁性聚苯乙烯微球 ,该微球粒径为 6 0～ 180 nm,考察了稀土磁性微球的形态和结构。并用电镜、原子吸收光谱、红外光谱对其性质进行了表征。     

填料特性对导电性复合材料性能的影响

使用碳纤维与镍粉组成混合填料加入低密度聚乙烯中，研究，材料性能的变化规律，结果发现，以等体积的碳纤维取代镍粉，未必能提高导电能力，其中沥青系碳纤维在大部或全部取代了镍后，电阻率还显著增加，只有当填料总的体积含量显著增加时，导电性才能进一步提高，纤维的加一般增加了拉伸强度，却降低了冲击强度，而且在含量不太高的情况下，含聚丙稀腈碳纤维材料的强度优于含沥青纤维的材料。     

一种改进的基于包对模型的有效带宽测量方法

本文通过分析数据包对的分离时间与背景流量之间的关系,提出了一种改进的基于包对模型测量端到端路径有效带宽的方法(ABwPP),可以直接测量路径的有效带宽而不需已知瓶颈带宽。NS-2上的模拟实验结果表明,该方法是准确有效的。     

基于敏感度因子与故障隔离度的模拟电路测点选择

提出了一种基于类内类间敏感度因子与故障隔离度的新方法对模拟电路测试节点进行优选.计算电路各测点采样数据的类内与类间距离离散度来定义测点敏感度因子,根据敏感度因子大小对待优选测点进行重新排序,利用KNN网络计算重排序测试节点的故障隔离组(度),最后优选出能辨识全部预设故障的最优测试节点集.实验结果证明:新方法得出的最优测点集包含的测点数量更少,该方法可以优选出相比其他文献方法故障诊断效率更高的同等规模的测试节点集合.     

介质周期结构色散特性的严格分析：一种三维边值问题的求解方法

本文以耦合模理论和Ｆｌｏｑｕｅｔ理论为基础，把本征模展开与空间谐波展开巧妙地结合起来，严格分析了斜入射情况下介质周期结构的色散特性－三维边值问题。这种新方法既避免了通常耦合模方法分析此类问题所引入的微扰近似，又比Ｆｌｏｑｕｅｔ方法简单方便。通过对斜入射情况下一些介质结构滤波特性的数值分析，证实了本文方法的有效性，精确性和实用性。     

负色散镜的设计、制备及在掺钛蓝宝石激光谐振腔内的使用

根据钛宝石激光器的要求设计了性能优良的两种负色散镜(NDM1和NDM2)。NDM1同时引入啁啾效应和G-T效应产生大的群延迟色散量以减少光在负色散镜上的反射次数。NDM2仅引入G-T效应产生较小的群延迟色散以补偿腔内自相位调制带来的部分啁啾。选用离子束溅射法制备了这两种负色散镜。用分光光度计测试了它们的透射率。结果表明,所制备的负色散镜的性能与设计性能非常接近。使用这两种负色散镜进行掺钛蓝宝石激光谐振腔内色散补偿实现了飞秒脉冲锁模,获得了15 fs的超短脉冲。