On the ‘curiosity’ of electrical self‐heating,static charge and electromagnetic shielding effectiveness from carbon black/aluminium flakes reinforced epoxy‐resin composites

This paper shows the wide application range (such as electrical self‐heating and electromagnetic shielding effectiveness) of composites consisting of conductive carbon black/aluminum flakes (CBA) filler and epoxy insulative matrix. The effect of CBA content on the network structure of epoxy matrix was investigated in detail. Static electrical conductivity increases linearly with the increase of filler concentration at the interface in epoxy composites. The large decrease of the conductivity as a function of the temperature is analyzed in terms of the negative temperature coefficient of conductivity (NTCC) effect. The influence of viscosity, surface energy and barrier highest energy on the NTCC behaviour in the composite is also considered. Based on these results, a new interpretation is proposed to explain the NTCC phenomena by computing the swelling force among conductive phases. The correlations of conductivity during the temperature cycling and activation energy were analyzed. The effects of dynamic ageing at various temperatures on the resistivity are reported. Current–voltage–temperature characteristics for epoxy with different contents of CBA were examined in detail. A model based on the law of energy conservation is proposed to calculate the specific heat and amount of heat dissipation. The static charge of the epoxy–CBA composites was estimated. The correlation between electromagnetic wave‐shielding effectiveness (EMS), conductivity and frequency of epoxy composites with different filler contents is also discussed. Furthermore, the effect of annealing on EMS of epoxy composites was examined. © 2002 Society of Chemical Industry     

Preparation of Aluminum Nitride Powder from Aluminum Polynuclear Complexes

AIN powder was synthesized from aluminum polynuclear complexes. Basic aluminum chloride and basic aluminum lactate were used as the aluminum polynuclear complexes. These starting materials and glucose were dissolved in water and mixed homogeneously. AIN powder was obtained by calcining after drying and precalcining at 800°C under nitrogen gas flow. Then excess carbon was removed by firing in air. Nitridation in the system was investigated and compared with that in the alumina–carbon black system. It was found that in our reaction system nitridation began and proceeded at lower calcination temperatures above 1200°C than in the alumina–carbon black system. Using aluminum polynuclear complexes, AIN was synthesized through the nitridation of γ-alumina and produced in a very fine and sharp particle size distribution.     

复合型导电塑料的研究进展

介绍了复合型导电塑料的种类。特性与应用，讨论了它们的导电机理及影响导电性的因素。着重全叙述了国内外对添加抗静电剂、导电填料以及共混复合型导电塑料的研究现状与发展趋势。     

Melting aspects of filled compounds in a modular co‐rotating twin screw extruder

In the polymer industry, precompounded materials are widely used. Carefully designed melting experiments were carried out to investigate melting mechanisms in master batched polymer compounds, using an intermeshing co‐rotating twin screw extruder. Calcium carbonate or aluminum powder was master batched with linear low‐density polyethylene (LLDPE). The calcium carbonates, which were used in the compounds, have differences in weight fraction and particle size. The compounds containing filler have higher thermal conductivities and viscosities than neat polyethylene. We observed melting initiation and propagation mechanisms of LLDPE compounds by removal and characterization of polymer compound carcasses in the melting region. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1990–2012, 2006     

钇铝石榴石粉体制备方法综述

综述了目前YAG粉体材料的几种合成方法,包括高温固相法、溶胶-凝胶法、燃烧法、喷雾热解法和化学沉淀法(化学共沉淀法、分步沉淀法和改进的化学共沉淀法),总结了每种方法的优缺点,并对YAG粉体材料新的合成工艺进行了展望。     

Sintering of the Mechanochemically Activated Powders of Hexagonal Boron Nitride

Pressureless sintering of hexagonal boron nitride (BN) was performed using a powder activated by mechano-chemical treatments. Physical properties of the sintered BN bodies depend on the type of starting powder and the conditions of the treatments. The BN body, which was obtained at 2000°C using an appropriate activated powder, was 99 wt% pure and was excellent in mechanical and physical properties, in spite of its low density (1.64 g/cm³).     

Characterization and Sintering Behavior of Alkoxide-Derived Aluminosilicate Powders

Submicrometer SiO₂-Al₂O₃ powders with compositions of 46.5 to 76.6 wt% Al₂O₃ were prepared by hydrolysis of mixed alkoxides. Phase change, mullite composition, and particle size of powders with heating were analyzed by DTA, XRD, IR, BET, and TEM. As-produced amorphous powders partially transformed to mullite and Al-Si spinel at around 980°C. The compositions of mullite produced at 1400° and 1550°C were richer in Al₂O₃ than the compositions of stable mullite solid solutions predicted from the phase diagram of the SiO₂-Al₂O₃ system. Particle size decreased with increasing Al₂O₃ content. The sintered densities depended upon the amount of SiO₂-rich glassy phase formed during sintering and the green density expressed as a function of particle size.     

Effect of filler network on dynamic viscoelastic properties of uncured polymethylvinylsiloxanes filled with silica and carbon black

Dynamic properties of polymethylvinylsiloxane (PMVS) filled with filler‐blends composed of carbon black (CB) and silica (SiO₂) were investigated using an advanced rheometric expansion system. A variety of weight fraction of CB to SiO₂ were 0/100, 10/90, 30/70, 50/50, 70/30, 90/10, and 100/0, and a bifunctional organsilane, bis(3‐triethoxysilylpropyl)tetrasurfane, was used to facilitate the filler dispersion. The results reveal that the incorporation of CB/SiO₂ filler‐blends into PMVS result in a reduced Payne effect. This effect reaches a minimum when the ratio of CB/SiO₂ approaches 1, and then it began to rebound with the ratio increase. Meanwhile, a characteristic Newtonian viscosity plateau appearing in low frequencies also significantly decreases, depending on the amount of CB or SiO₂ added. On the basis of a simplified Fowke model, we ascribe this phenomenon to the deteriorated filler network, which is predominantly induced by the totally different surface activity between CB and SiO₂. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3477–3482, 2006     

脉冲放电高能转化制备纳米粉体

综合介绍了脉冲电流通过细金属丝放电(pulsed wire discharge,PWD)制备纳米粉体的方法.讨论了影响纳米粉体,特别是晶粒尺寸的因素,以防止形成亚微米颗粒.因为达到电压峰值的丝的沉积能相当于丝的汽化能,因此,能夠计算出沉积能.随着所施加的能量增加,气体压力降低,介质气体的热扩散率增大,晶粒尺寸变小.在惰性气氛中,采用PWD工艺,由金属蒸气急冷可制备金属粉体.如果介质气体变为氧气或者氨气,就能制备氧化物、氮化物纳米粒子.要制备双金属合金、双氧化物或氮化物纳米粒子就必需采用双金属丝和不同的介质气体.采用PWD工艺,在有机气体或烟气中,能制备电磁屏蔽和导电浆料和其它用途的钝化纳米粒子.采用丝输送器而实现大量生产纳米粉体的PWD工艺一个实例证明了PWD工艺生产纳米粉体的可行性.     

填料对双组分缩合型室温硫化硅橡胶性能的影响

考察了多种补强填料和半补强(或增量)填料如硅藻土、碳酸钙和氧化铝等对室温硫化(RTV)硅橡胶的机械性能和介电性能的影响。结果表明,采用经六甲基二硅氮烷处理的气相法白炭黑或沉淀法白炭黑作填料时,RTV硅橡胶多方面的性能都有所提高;采用补强填料和半补强填料并用的RTV硅橡胶的性能优于使用单一补强填料的RTV硅橡胶;随着填料用量的增加,RTV硅橡胶的机械性能、相对介电常数和介质损耗因数都有一定程度的提高,但体积电阻率有所降低。