一种简易可靠的射频激光调制器

采用ＰＩＮ电调衰减器、ＴＬ４９４等元件组成了射频（ＲＦ）大功率ＣＯ２激光调制器，调制频率、占空比和调制度单独可调。给出了电路的工作原理和测试结果。     

光栅衍射法测量超短光脉冲的宽度

本文详细阐明了光栅衍射法测量超短光脉冲宽度的原理。测量了ＴＥＡ－Ｎ２激光器泵浦的短腔染料激光器输出的光脉冲的宽度。其结果与用条纹相机测得的结果一致。     

激光诱导激波在氮气中的传播

实验观察了强激光脉冲击穿氮气诱发激波及其传播过程，用爆炸波模型讨论了激波的产生和传播，给出了激波传播的基本规律，对实验结果作出了满意的解释。     

白丰梯级水库实用电力优化调度图的研制——变动目标水位控制法的研究

在分步设计及大量计算的基础上，提出了一套考虑因素相对全面、指导 性强、易于操作的梯级水库电力实用优化调度图。该调度图继承了传统时历法调度图直观、 简明的优点，又具有其特有的优化功能。该方法以汛末蓄满水库为标准，确定典型来水过程 的预调度线和初始目标；以获得梯级电站最大长期调峰收益为目标，以变动目标水位控制为 核心，开发出调度图长系列操作通用程序模块，并以此模块作为寻优计算的手段。提出了水 库长期运行与短期实时调度有机结合，以及模拟计算、水位偏差最优反馈、来水预报、目标 水位寻优等多种实用处理技术。     

液氮温区同轴脉冲管制冷机的实验研究

脉冲管制冷机冷头朝上布置可以使制冷机与超导器件的耦合更方便 ,但对G -M型脉冲管制冷机 ,重力会对这种布置方式产生不利影响。对双向进气型脉冲管制冷机 ,直流和耦合传热会共同影响脉冲管制冷机的性能。介绍了液氮温区G -M型同轴脉冲管制冷机的实验结果 ,主要研究了蓄冷器温度分布和重力对脉冲管制冷机性能的影响     

Thermal shock and thermal fatigue study of ceramic materials on a newly developed ascending thermal shock test equipment

A test equipment was designed to study thermal shock and thermal fatigue of ceramic materials subjected to fast heating (ascending). The equipment was designed to generate thermal stress in a test specimen by heating one surface of it by an oxy-hydrogen flame while cooling the opposite surface. The sample cracked when thermal stress exceeded its mechanical strength. The in situ crack formation was detected by an acoustic emission system coupled to the set up. The hot zone temperature was measured by an infra red pyrometer. The equipment was also designed to run thermal fatigue test cycles in automatic mode between two selected temperatures. The temperature and thermal stress distribution in the test specimen were modelled using finite element software. The effect of temperature distribution of the top and bottom surfaces on thermal stresses was studied. It was observed that the thermal stress is very sensitive to the temperature distribution on the top surface and maximum near the periphery of the top surface. This was in agreement with the experimental results in which the cracks were originated from the periphery of top surface. It was also observed that the failure temperature was higher for thicker samples.     

燃气空调的优势及对燃气和电力调峰的意义

分析了天然气季节性调峰的各种手段，指出燃气空调的技术经济优势，以及发展燃气空调对于电力和燃气系统季节性调峰的作用。     

Change of characteristics of desulfurization and denitrification by combustion flue gas composition and electrode configuration under pulsed corona discharge

Laboratory-scale and parametric experiments of SO₂ and NO_x removal from the simulated combustion gas by pulsed corona discharge have been performed by changing the combustion gas composition and temperature, the electrode configuration of plasma reactor, and the polarity of high-voltage electrode. The following results are obtained: 1) the higher the concentration of H₂O and O₂, the higher the efficiency of desulfurization and denitrification at the same specific input; 2) the pulsed corona discharge with a voltage pulsewidth as short as 200 ns of negative polarity shows the possibility to attain almost 90 percent deSO_x and deNO_x efficiency at the specific discharge input of 20 J/g, which is almost the same as the specific input in the electron-beam process; 3) the deNO_x characteristics show a little temperature dependence in the range of 70 to 130°C, but the deSO_x efficiency increases rapidly in the temperature region below 100°C suggesting the thermochemical dependence of deSO_x reaction; 4) when desulfurization and denitrification proceed, the white dendritic powder deposits on the plasma reactor whose composition is identified to be 49 mol% (NH₄)₂SO₄ and 47 mol% of 2NH₄NO₃ · (NH₄)₂SO₄, and the ratio of SO₂, NO and NH₃ of the deposit is almost equal to that of supplied gas.     

Reducing Average and Peak Test Power Through Scan Chain Modification

Parallel test application helps reduce the otherwise considerable test times in SOCs; yet its applicability is limited by average and peak power considerations. The typical test vector loading techniques result in frequent transitions in the scan chain, which in turn reflect into significant levels of circuit switching unnecessarily. Judicious utilization of logic in the scan chain can help reduce transitions while loading the test vector needed. The transitions embedded in both test stimuli and the responses are handled through scan chain modifications consisting of logic gate insertion between scan cells as well as inversion of capture paths. No performance degradation ensues as these modifications have no impact on functional execution. To reduce average and peak power, we herein propose computationally efficient schemes that identify the location and the type of logic to be inserted. The experimental results confirm the significant reductions in test power possible under the proposed scheme.     

高非线性光纤及其应用

介绍了各种高非线性光纤的原理，并对其在超连续（SC）脉冲的产生和波长变换上的应用作了讨论。