三维精细积分法地震正演及边界条件

 将任意差分精细积分法用于三维波动方程地震正演，关键在于如何消除数值计算中有限波场区域边界引起的边界反射。文中采用Berenger给出的电磁波完全匹配层吸收边界条件，推导出三维波动方程任意差分精细积分法地震正演的完全匹配层吸收边界条件计算公式，并给出了完全匹配层吸收边界条件算例。计算结果表明，此方法压制边界反射效果明显。三维波动方程地震正演模拟实例表明，完全匹配层吸收边界条件的任意差分精细积分法为复杂区地震波传播规律研究提供了一种实用的正演模拟工具     

Accumulation of amplified target DNAs using thiol/biotin labeling, S1 nuclease, and ferrocene-streptavidin-magnetic system and a direct detection of specific DNA signals with screen printed gold electrode

Combinations of PCR-based amplification platform using 5′ thiolated and biotinylated specific primers, S1 nuclease-PCR products treatment, ferrocene-streptavidin (Fc-Stv)-magnetic binding for DNA accumulation, and screen printed gold electrode for the DNA allocation, were applied to Hoechst 33258-induced DNA aggregation and signals induction system for direct signals detection and DNA quantification in food samples. Thiolated and biotinylated at each 5′ terminus enabled DNA purification through S1 nuclease treatment for primers and non-specific DNA elimination and enabled DNA trapping with a ferrocene-streptavidin-magnetic system. This facilitated the accumulation of target DNAs at higher concentration, resulting in enhanced signals. After allocation of DNA on the surface of gold electrode via thiol binding, intensity of DNA signals through these treatments could be measured directly after being induced by Hoechst 33258. Wider amplitude changes in anodic current peaks between negative and positive samples (increasing from 3.70 to 10.10 μA) compared with those applied with no treatment combinations (decreasing from 3.92 to 1.23 μA) were observed. This enhancement of the signals allowed a greater efficiency of DNA quantification. When this combination was used for GMOs content estimation in reference samples, results revealed an improved accuracy from 66% to 96%. The combined biosensor system, although more costly than the standard Hoechst 33258/carbon electrode system, provided an alternative choice for DNA quantification, offering labor-free immobilization of probe onto electrode surface, easy test administration, and efficient semi-quantitative test without expensive instruments.     

Diffusion-controlled size-selective chloride ion sensing in the presence of bromide ion using a thin, nanoporous, plasma-polymerized coating on an Ag/AgCl electrode

We have developed a diffusion-controlled size-selective method for sensing chloride ion in the presence of bromide ion, based on a thin, nanoporous, plasma-polymerized coating of hexamethyldisiloxane on an Ag/AgCl electrode. Sub-nanometer-sized pores responsible for a highly cross-linked polymer network in the plasma-polymerized coating allowed diffusion-controlled permeation of chloride ion while blocking the larger bromide ion. An electrode coating of thickness greater than 70 nm enabled chloride detection in the concentration range 1-10 mM in the presence of 0.63 mM bromide ion. Advantages of this approach are: (1) simple design compared with ionophore-based strategies and (2) compatibility with microfabrication and mass production processes.     

Bi3+对纳米MnO2水热合成的影响研究

在中性和酸性条件下，以MnO2作为锰源，通过水热合成了纳米MnO2，通过XRD和TEM对产物进行的观察表明，在酸性条件下，向溶液中添加一定量的Bi^3 ，产物的晶型由α型向γ型转化，产物形貌由针状、丝状向颗粒状转变。     

分割电极片状压电致动器——(二)位移特性及狭缝宽度对其影响的实验研究

研究了悬臂梁式分割电极片状压电致动器的位移特性。理论分析表明，分割电极狭缝宽度会减小致动器自由端的位移输出，但当狭缝宽度小于致动器电极宽度的１０％时，可忽略狭缝宽度的影响。致动器端部位移的测试结果大于理论计算值。与现有磁头悬浮臂尺寸相近的致动器，在２０Ｖ～５０Ｖ的电压驱动下均可获得１μｍ～２μｍ的致动位移。对９８５０道／厘米的密度磁盘，该位移能覆盖至少一个磁道宽度，满足磁头定位两级伺服系统对第二级致动器位移的基本要求。     

型煤发展的回顾与展望

煤炭科学研究总院建院以来型煤研究工作的进展状况、主要成果,并对几项工业型煤技术进行了概述和评价,还对今后型煤研究方向提出了建议。     

大断面交岔点失稳分析及治理

通过工程地质调查、室内围岩物化分析和力学试验 ,深入研究了围岩变形力学机制和破坏机理 .根据新奥法施工原理 ,采取了有针对性的综合治理措施 ,将围岩复杂的变形力学机制转化为单一的变形力学机制 ,使该工程得到了有效治理 .取得的技术经验推广应用于该矿井其它失稳破坏工程 ,均获得了圆满成功     

人工接地装置设计方法分析

本文系统地论述了人工接地装置的设计方法,修正了现有文献中有关论述的缺点和错误,提出了通过迭代求解方程组来设计人工接地装置的新方法。     

A new approach to the mechanism of chlorine evolution: Separate examination of the kinetic steps using ac impedance on a rotating thin ring electrode

In the absence of a bulk diffusion effect, it is shown for the first time that the impedance spectra for the chlorine evolution reaction on a rotating thin ring electrode comprise three consecutive semicircles in the capacitive half of the complex plane. The first (highest frequency) semicircle is due to the charge-transfer resistance for chloride discharge and the simultaneous chlorine adsorption coupled to the double-layer capacitance. The second semicircle (around 5 Hz) is due to the adsorption and desorption of a chlorine intermediate. The third (lowest frequency, around 0.5 Hz) semicircle is due to the relaxation of surface oxygen species. The impedance data allow the steps of the overall reaction to be examined individually. On a Pt surface the rate of chloride discharge and simultaneous chlorine adsorption (the admittance of the first semicircle) is first order with respect to chloride concentration and has a potential-dependence close to 58 mV/decade. The rate of the adsorption and desorption process (the admittance of the second semicircle) is second order with respect to chloride concentration, and has a potential dependence close to 30 mV/decade. The time constant for the adsorption/desorption processes is ca 20 ms, independent of electrode potential in the range studied. These features are consistent with a mechanism in which a faster discharge reaction (Cl⁻ Cl_ad + e) is followed by a slower surface combination reaction (2Cl_ad → Cl₂), but inconsistent with mechanisms in which ion + atom desorption is predominant, the initial chloride discharge is slow, or a unipositively charged chlorine species is involved.