A timing controller embedded driver IC with 3.24‐Gbps eDP interface for chip‐on‐glass TFT‐LCD applications

This paper presents a timing controller embedded driver (TED) IC with 3.24‐Gbps embedded display port (eDP), which is implemented using a 45‐nm high‐voltage CMOS process for the chip‐on‐glass (COG) TFT‐LCD applications. The proposed TED‐IC employs the input offset calibration scheme, the zero‐adjustable equalizer, and the phase locked loop‐based bang‐bang clock and data recovery to enhance the maximum data rate. Also, the proposed TED‐IC provides efficient power management by supporting advanced link power management feature of eDP standard v1.4. Additionally, the smart charge sharing is proposed to reduce the dynamic power consumption of output buffers. Measured result demonstrates the maximum data rate of 3.24 Gbps from a 1.1 V supply voltage with a 7.9‐inch QXGA 60‐Hz COG‐LCD prototype panel and 44% power saving from the display system.     

Single display gamut size metric

To measure the relative gamut sizes of wide‐gamut displays, it is herein proposed that the CIE 1931 xy chromaticity diagram be used rather than the nominally perceptually uniform CIE 1976 u′v′ chromaticity diagram. High correlations were found between the area‐coverage ratios in the xy diagram and the volume‐coverage ratios in the CIE 1976 L^*a^*b^* color space for major standard wide‐gamut color spaces. It is also demonstrated herein that performing planimetry in the uniform u′v′ diagram does not yield accurate relative display gamut sizes, even though the large sizes obtained using the u′v′ diagram are often reported regardless of the fact that its uniformity is valid only when the luminance factor is constant. The single display gamut size metric using the xy diagram will facilitate the unbiased development of wide‐gamut displays.     

A wide view auto‐stereoscopic 3D display with an eye‐tracking system for enhanced horizontal viewing position and viewing distance

This paper describes the development of auto‐stereoscopic three‐dimensional (3D) display with an eye‐tracking system for not only the X‐axis (right–left) and Y‐axis (up–down) plane directions but also the Z‐axis (forward–backward) direction. In the past, the eye‐tracking 3D system for the XY‐axes plane directions that we had developed had a narrow 3D viewing space in the Z‐axis direction because of occurrence of 3D crosstalk variation on screen. The 3D crosstalk variation on screen was occurred when the viewer's eye position moved back and forth along the Z‐axis direction. The reason was that the liquid crystal (LC) barrier pitch was fixed and the LC barrier was able to control the only barrier aperture position. To solve this problem, we developed the LC barrier that is able to control the barrier pitch as well as the barrier aperture position in real time, corresponding to the viewer's eye position. As a result, the 3D viewing space has achieved to expand up to 320–1016 mm from the display surface in the Z‐axis direction and within a range of ±267 mm in the X‐axis direction. In terms of the Y‐axis direction, the viewing space is not necessary to be considered, because of a stripe‐shaped parallax barrier.     

Letter: Solution‐processed flexible zinc‐tin oxide thin‐film transistors on ultra‐thin polyimide substrates

In this letter, solution‐processed flexible zinc‐tin oxide (Z_0.35T_0.65O_1.7) thin‐film transistors with electrochemically oxidized gate insulators (AlOx:Nd) fabricated on ultra‐thin (30 µm) polyimide substrates are presented. The AlOx:Nd insulators exhibited wonderful stability under bending and excellent insulating properties with low leakage current, high dielectric constant, and high breakdown field. The device exhibited a mobility of 3.9 cm²/V · s after annealing at 300 °C. In addition, the flexible device was able to maintain the electricity performance under various degrees of bending, which was attributed to the ultra‐thin polyimide substrate.     

Two‐way multi‐view 2‐D/3‐D display combining LC lens and HVxDP panel using novel pixel arrangement

We have developed a two‐way multi‐view 2‐D/3‐D display combining a liquid crystal lens and horizontally and vertically x times‐density pixels (HVxDP) arrangement. The two‐way multi‐view display features the same display resolution in 2‐D and 3‐D modes and a quite small color moiré for landscape and portrait, respectively, when using the HVxDP arrangement. In this paper, we realized suitable 3‐D properties for achieving a good balance between 3‐D moiré and 3‐D crosstalk for landscape and portrait by a two‐way liquid crystal lens with two kinds of focal lengths for the edge part and the center part of the lens.     

Finite‐time asynchronous filtering for discrete‐time Markov jump systems over a lossy network

This paper is concerned with the problem of finite‐time asynchronous filtering for a class of discrete‐time Markov jump systems. The communication links between the system and filter are assumed to be unreliable, which lead to the simultaneous occurrences of packet dropouts, time delays, sensor nonlinearity and nonsynchronous modes. The objective is to design a filter that ensures not only the mean‐square stochastic finite‐time bounded but also a prescribed level of performance for the underlying error system over a lossy network. With the help of the Lyapunov–Krasovskii approach and stochastic analysis theory, sufficient conditions are established for the existence of an admissible filter. By using a novel simple matrix decoupling approach, a desired asynchronous filter can be constructed. Finally, a numerical example is presented and a pulse‐width‐modulation‐driven boost converter model is employed to demonstrate the effectiveness of the proposed approach. Copyright © 2016 John Wiley & Sons, Ltd.     

Composite adaptive dynamic surface control using online recorded data

This paper presents an online recorded data‐based design of composite adaptive dynamic surface control for a class of uncertain parameter strict‐feedback nonlinear systems, where both tracking errors and prediction errors are applied to update parametric estimates. Differing from the traditional composite adaptation that utilizes identification models and linear filters to generate filtered modeling errors as prediction errors, the proposed composite adaptation integrates closed‐loop tracking error equations in a moving time window to generate modified modeling errors as prediction errors. The time‐interval integral operation takes full advantage of online recorded data to improve parameter convergence such that the application of both identification models and linear filters is not necessary. Semiglobal practical asymptotic stability of the closed‐loop system is rigorously established by the time‐scales separation and Lyapunov synthesis. The major contribution of this study is that composite adaptation based on online recorded data is achieved at the presence of mismatched uncertainties. Simulation results have been provided to verify the effectiveness and superiority of this approach. Copyright © 2016 John Wiley & Sons, Ltd.     

Improved exponential observer design for one‐sided Lipschitz nonlinear systems

This paper investigates the exponential observer design problem for one‐sided Lipschitz nonlinear systems. A unified framework for designing both full‐order and reduced‐order exponential state observers is proposed. The developed design approach requires neither scaling of the one‐sided Lipschitz constant nor the additional quadratically inner‐bounded condition. It is shown that the synthesis conditions established include some known existing results as special cases and can reduce the intrinsic conservatism. For design purposes, we also formulate the observer synthesis conditions in a tractable LMI form or a Riccati‐type inequality with equality constraints. Simulation results on a numerical example are given to illustrate the advantages and effectiveness of the proposed design scheme. Copyright © 2016 John Wiley & Sons, Ltd.     

Time‐multiplexed tiled projection system with improved pixel and spatial resolution

We propose two methods to increase the pixel and spatial resolution of Digital Micromirror Devices (DMD)‐based projectors by utilizing the large bandwidth provided by their high pattern rates. By varying the intensity of the illumination for each binary pattern displayed on the DMD, the time required to display an 8‐bit grayscale image can be reduced by up to factor 32 compared to using constant illumination and binary pulse‐width modulation (BPWM). The high image rate projection is then spatially separated by either using a galvanometer scanner or sequentially illuminating the DMD from different directions, thus creating multiple independently addressable projections which are then tiled to form a larger, higher resolution image.     

Development of flexible displays using back‐channel‐etched In–Sn–Zn–O thin‐film transistors and air‐stable inverted organic light‐emitting diodes

We developed flexible displays using back‐channel‐etched In–Sn–Zn–O (ITZO) thin‐film transistors (TFTs) and air‐stable inverted organic light‐emitting diodes (iOLEDs). The TFTs fabricated on a polyimide film exhibited high mobility (32.9 cm²/Vs) and stability by utilization of a solution‐processed organic passivation layer. ITZO was also used as an electron injection layer (EIL) in the iOLEDs instead of conventional air‐sensitive materials. The iOLED with ITZO as an EIL exhibited higher efficiency and a lower driving voltage than that of conventional iOLEDs. Our approach of the simultaneous formation of ITZO film as both of a channel layer in TFTs and of an EIL in iOLEDs offers simple fabrication process.