金刚石薄膜异质外延的研究进展

主要介绍金刚石薄膜在Si上异质外延的研究状况。综述了外延金刚石薄膜的偏压形核 ,SiC过渡层的影响及一些实验参数对外延薄膜质量的影响等 ,并论述了发展方向     

Sensitizing Mechanism and Adsorption Properties of Dye—Sensitized TiO2 Thin Films

The dye-sensitized TiO2 complex films were prepared by the dye coat onto TiO2 surfaces,and the sensitizing mechanism and adsorption properties of the dye-sensitized TiO2 complex films were inverstigated.The influence of the application conditions of dye adsorbed on TiO2 films on the amount of dye adsorption was discussed.Experimental results show that the concentration,the temperature of dye solutions and the dipping time of TiO2 films in the dye solutions have a significant influence on the amount of dye adsorption.Cell test indicates that the conversion efficiency of light to electricity increases with the amount of dye adsorption.     

无明胶重铬酸盐全息记录软片的正性光抗蚀特性

对无明胶重铬酸盐全息记录软片（ＮＧＤ）的光正性抗蚀特性进行了分析研究，通过对溶解度的分析及红外光谱的测定，首次提出ＮＧＤ是一种新型的紫外正性光抗蚀材科，给出了实验及分析结果。     

Sputter deposition technology as a materials engineering

Sputter deposition is currently being widely used in the microelectronics industry for the production of silicon integrated circuits. Recently interest has been focused on sputter deposition as a new materials processing technique. The highly energetic sputtered atoms enhance crystal growth and/or sintering during film growth. This results in lowering of the growth temperature of high temperature materials including cubic diamonds. Single crystals of complex ceramics materials could be prepared by sputter deposition through epitaxial growth process. Atomically controlled deposition using multi-target sputter enables to make man-made superlattice including high-T _C superconductors of layered perovskite. At present sputter deposition is one of key materials technologies for the coming century.     

Petri net based process scheduling: A model of the control system of flexible manufacturing systems

In this paper, we propose a class of algorithms for the sub-optimal solution of a particular class of problems of process scheduling, particularly focusing on a case study in the area of flexible manufacturing systems (FMSs). The general class of problems we face in our approach is characterized as follows: there is a set of concurrent processes, each formed by a number of temporally related tasks (segments). Tasks are executable by alternate resource sets, different both in performance and costs. Processes and tasks are characterized by release times, due dates, and deadlines. Time constraints are also present in the availability of each resource in resource sets. It has been proven that such a problem does not admit an algorithm for an optimal solution in polynomial time. Our proposed algorithm finds a sub-optimal schedule according to a set of optimization criteria, based on task and process times (earliness, tardiness), and/or time independent costs of resources. Our approach to process scheduling is based on Timed Coloured Petri Nets. We describe the structure of the coordination and scheduling algorithms, concentrating on (i) the general-purpose component, and (ii) the application-dependent component. In particular, the paper focuses on the following issues: (i) theautomatic synthesis of Petri net models of the coordination subsystem, starting from the problem knowledge base; (ii) the dynamic behavior of the coordination subsystem, whose kernel is a High Level Petri net executor, a coordination process based on an original, general purpose algorithm; (iii) the structure of the real-time scheduling subsystem, based on particular heuristic sub-optimal multi-criteria algorithms. Furthermore, the paper defines the interaction mechanisms between the coordination and scheduling subsystems. Our approach clearly distinguishes the mechanism of the net execution from the decision support system. Two conceptually distinct levels, which correspond to two different, interacting implementation modules in the prototype CASE tool, have been defined: theexecutor and thescheduler levels. One of the outstanding differences between these levels is that the executor is conceived as a fast, efficient coordination process, without special-purpose problem-solving capabilities in case of conflicts. The scheduler, on the other hand, is the adaptive, distributed component, whose behavior may heavily depend on the problem class. If the scheduler fails, the executor is, in any case, able to proceed with a general-purpose conflict resolution strategy. Experimental results on the real-time performance of the kernel of the implemented system are finally shown in the paper. The approach described in this paper is at the basis of a joint project with industrial partners for the development of a CASE tool for the simulation of blast furnaces.     

Growth and characterization of hot-wall epitaxial CdTe on (111) HgCdTe and CdZnTe substrates

Thin CdTe films were deposited by hot-wall epitaxy (HWE) on (111) HgCdTe and CdZnTe substrates at temperatures from about 140 to 335°C. X-ray rocking curves were used to show that crystal quality of the CdTe (111)B films improved as substrate temperature increased from 140 to about 250°C. Rocking curve values for full width at half maximum (FWHM) decreased from 2–4 degrees at 140–150°C to less than 100 arc-s at 250°C, and a FWHM of 59 arc-s was the lowest value observed near 250°C. The FWHM of the HWE CdTe was found to be insensitive to growth rate below about 400Å/min, but increased to four degrees at 1250Å/min. X-ray diffraction confirmed that films grown on the B-face at higher temperatures were epitaxial, but contained a significant volume fraction, 35% to 50%, of rotational in-plane twins. Electron microscopy confirmed a coarse twin density, and photoluminescence spectra showed an absence of excitonic emission in the HWE films. Simultaneous growth on two (111) HgCdTe substrates with different surface polarities between 230°C and 335°C showed that deposition rate on the A-face decreased relative to that on the B-face as temperature increased. Films grown on the B-face exhibited better surface morphologies than those grown on the A-face.     

Review: Modified Atmosphere Packaging and its effects on the microbiological quality and safety of produce

Modified Atmosphere Packaging and related technologies are increasingly used to extend shelf-life of fresh produce. This paper reviews the effect of such technology on the spoilage microbiological flora and food-borne pathogens which may be present in produce and also on the organoleptic properties of the product.     

有限缓冲区FMS的特征分析与托盘配置

本文研究了Ｊｏｂ－Ｓｈｏｐ型有限缓冲区ＦＭＳ的运行特性及托盘优化配置问题，给出了系统的分析模型及托盘优化算法。本文的结果对系统的分析与设计具有重要的实际意义。     

Advancing controlled release packaging through smart blending

Researchers from Rutgers University and Clemson University have collaborated to develop a concept of using smart blending to generate functional packaging films for the controlled release of active compounds such as antimicrobials, antioxidants and flavour compounds to extend the shelf‐life of food. In this paper, literature results are reviewed to justify the significance of controlled release packaging (CRP) and the research gaps for further development are identified. A major research gap is the lack of packaging materials that can provide the release of active compounds at rates suitable for a wide range of food packaging applications. Smart blending is a promising technology for bridging this research gap. To fully realize the potentials of smart blending, a systematic approach for developing CRP using smart blending is also presented. Copyright © 2005 John Wiley & Sons, Ltd.     

柔性纤维混凝土的疲劳特性研究

将柔性纤维掺入水泥混凝土可以大幅度提高混凝土的弯曲疲劳等路用性能,并通过试验建立了柔性纤维混凝土的疲劳方程.结果表明,柔性纤维不但能使混凝土的强度提高,更主要的是可以在重交通条件下,可成倍地提高混凝土的弯曲疲劳寿命.