成藏流体历史分析——以黄骅坳陷三马地区为例

应用储集层岩石烃类流体包裹体研究方法，对黄骅坳陷三马地区沙一段油藏进行了重建成藏流体历史的尝试。对包体流体状态的分析表明，成藏流体具有高密度，高矿化度的性质，被捕获时的温度约为110－140℃，成藏流体的主要充注时期在明化镇组沉积期，距今为10－4Ma之前，充注成藏后的小幅度构造抬升中可能使原称油水界面以下的地层水矿化度发生变化，导致现今储集层流体矿化矿比包裹体流体矿化度明显下降。图5表2参6（钟宁宁摘）。     

Mathematical modelling of a reverse flow reactor with catalytic surface dynamics

This paper studies a system of partial differential equations modelling the behaviour of a reverse flow reactor. For the parameters appropriate for the oxidation of ammonia on a Pt/Al₂O₃ catalyst in a typical laboratory set-up, the reactor may be split into regions where approximate formulas that determine its behaviour are deduced. Numerical calculations are presented and can be used to compare with the analytical formulas. The physical insight gained from the asymptotic analysis suggests a new switching strategy which is the subject of numerical experiments. The switching strategy is found to be efficient at minimising the ammonia exiting the reactor after reversal.     

重油催化裂化干气氢提纯技术的开发

石家庄炼油厂和西南化工研究设计院合作开发的中国石化系统第一套利用变压吸附技术进行RFCC干气氢提纯工业试生产装置一年的平稳运行说明：提纯后产品氢纯度达99．9％，回收率大于85％；操作简便灵活；装置负荷弹性裕度大；经济效益显著。实践证明它是一项富有吸引力的新工艺，为重油催化裂化装置的挖潜增效展示了美好的前景。     

��ɫ������������ѡ�꾮Һ����ģʽ

本文应用灰色关联分析方法,对70种不同类型和组成的钻井液,进行了两参数流变模式优选及评价。与现行方法比较的结果表明此方法与现行结果的吻合度高,并有新颖、数据要求量少、结论易于比较等优点。     

煤层防塌钻井液技术

从煤层岩的强度等力学性能和化学结构、密度、亲油亲水性等理化性能综合分析了塔里木盆地依奇克里克区块煤层坍塌的机理，确定了防塌措施，用封堵实验法考查了粒径、温度、封堵剂种类与加量等因素对钻井液封堵防塌性能的影响，优选出的煤层防塌钻井液技术配方，在依西-1井、依南-4井等井的现场应用中取得了较好的煤层防塌效果，井径规则，起下钻，电测，取心，下套管，固井作业均顺利。     

Process optimisation in sunflower oil extraction by supercritical CO2

A continuous process for the extraction of sunflower oil using supercritical CO₂, featuring multiple extractors, one oil separator and three cascaded CO₂ recovery vessels operating at different pressures, was devised and studied. For every single equipment of the plant making up the process a mathematical model was built. Experimental tests—consisting in measurements of oil solubility in supercritical CO₂—were carried out in a laboratory-scale apparatus to characterise the behaviour of sunflower oil in the separation from the supercritical fluid. The mathematical model of the whole process was coded in the commercial gPROMS process modelling environment where both its simulation and optimisation—this latter assuming the overall oil production cost as the objective function—were carried out. The process- and economics-related results are discussed and compared with those obtained with traditional and cold-pressing extraction.     

Histamine determination in tears as an index of safety in use of cosmetic products

To assess ocular irritancy caused by chemical and cosmetic products a reliable method based on evaluation of histamine (Hm) in tears is presented. Hm is measured at picomole levels by HPLC and fluorimetric detection after fluorescamine-HM derivatization. In order to avoid any uncontrolled irritation and stimulation of the conjunctiva during sample collection, a procedure of conjunctiva lavage was developed. A balanced salt solution (50 μl) containing a known amount of Hm-fluorophore as reference standard is instilled in the conjunctiva fornix. After a few seconds 20 μl of tear fluid is collected: 10 μl are immediately analysed and 10 μl after derivatization reaction. In this way it is possible to evaluate tear dilution and to assess Hm content in less than 10 minutes.
In a group of 20 normal subjects Hm has been determined in comparison with that of two volunteers after topical application of 50 μ of 0.2% and 0.4% sodium lauryl sulphate solution. A contact of 30 seconds of the cosmetic ingredient caused an immediate dose-dependent Hm release through a direct cytotoxic damage of cell membranes due to the surfactant action.
Évaluation de l'irritation occulaire due aux cosmétiques par la détermination de l'histamine lacrimale     

A new method of characterization for stratified thermal energy stores

A new method for characterization of stratified thermal energy stores (TES) that integrates both the first law and the second law concerns is presented here. The first law concern is incorporated into a quantity called energy response factor and the second law concern into an entropy generation ratio. A product of these two quantities is at the heart of the TES efficiency definitions. This approach removes the overemphasis of the existing methods either on the first or the second law of thermodynamics which often biases the characterization results. The information about the evolution of the temperature field of the system in time is the prerequisite of the new method. It may be obtained from experiments or from suitable numerical simulations. The current method can be easily integrated into computational fluid dynamic (CFD) simulations and thus facilitate CFD-based design analysis. As an example of such CFD-integrated analysis, a large-scale hot water seasonal heat store is numerically studied to identify the effects of aspect ratio, containment shape, internal structures, and containment size on their efficiency. The results suggest the effectiveness of the new method in deriving useful design insights.     

大庆庆深气田深井快速钻井技术

为加快庆深气田深层天然气勘探开发步伐,进行了钻头选型、复合钻进、井身质量控制、井下复杂情况预防和气体钻井等深井快速技术研究与现场试验,深井机械钻速提高了23.1%,钻井周期缩短了58 d。详细介绍了庆深气田深井快速钻井技术和现场试验情况,并分析了试验效果,对庆深气田深井钻井提出了开展钻头选型试验、完善钻头序列,研制适应硬地层的牙轮钻头,研究营城组地层防塌技术和抗220℃高温水基钻井液体系及水泥浆体系的建议。     

康山金矿地质地球化学特征及其成因

康山金矿产在豫西熊耳山古隆起区的结晶基底太华群和盖层中元古界熊耳群地层接触界面附近，矿体严格受构造破碎蚀变带控制。流体包裹体，稳定同位素等研究表明，成矿物质来自太华群变质岩，成矿流体的性质与变质热液截然不同，而与花岗岩浆热液相近似。该矿床的形成与燕山期发生的同构造－花岗岩浆期热液活动有关，金沉淀成矿阶段有大气水的混入。