Zeolite synthesis from paper sludge ash with addition of diatomite

BACKGROUND: This study aimed to investigate the synthesis of zeolites from paper sludge ash (PSA) with added diatomite to remove both NH₄⁺ and PO₄^3? for water purification. The PSA had low Si and significant Ca contents. Four types of diatomite: white (T‐W) and brown (T‐B) from deposits of marine origin in Takanosu, and white (S‐W) and gray (S‐G) from lacustrine deposits in Shonai, were added to NaOH solution to increase the Si content and thereby synthesize zeolites with high cation exchange capacity (CEC). RESULTS: The order of the amounts of Si extracted from the diatomite to the alkali solution was S‐W > T‐W = T‐B > S‐G, which correlates with the amorphous SiO₂ content of diatomite. The original ash without addition of diatomite yielded hydroxysodalite with CEC of about 1.0 mmol g^?1. For all samples, the addition of diatomite to the solution yielded zeolite‐P with a higher CEC, but the addition of excess Si inhibited the synthesis of zeolite‐P, and the CEC of the product was low. A product with high CEC including zeolite‐P was obtained in a solution with around 500 mmol L^?1 of Si concentration, and had the ability to remove both NH₄⁺ and PO₄^3?. CONCLUSION: Diatomite has the potential for used as an additive for the synthesis of high CEC zeolite from PSA. The product with zeolite‐P exhibited relatively high CEC, capacity for NH₄⁺ uptake, and the ability to remove PO₄^3? by precipitation, which is preferable for water purification applications. Copyright © 2008 Society of Chemical Industry     

Mechanical properties and thermal stability of rice husk ash filled epoxy foams

Mechanical properties and thermal stability of epoxy foams filled with white and black rice husk ash were studied. Epoxy foams were prepared from a commercial system and filled with different amounts of both the ashes (0, 6.8, 12.8, 18.0, and 22.7 wt %). The incorporation of both the ashes modified the final morphology of the foam, decreasing the average cell size and increasing the number of cells per volume unit. For all filler percentages used, the specific modulus and strength results showed that the white ash is more effective as reinforcing agent than the black ash. The initial degradation temperature was not affected by the content and type of ash used as the filler. The integral procedure decomposition temperature, weight loss, and char residue results were related to the ash type and atmosphere used in the thermogravimetric analysis. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Composition and morphology of char particles of fly ashes from industrial burning of high-ash coals with different reactivity

A comparative investigation of the composition and the morphology of char particles was conducted: char particles were recovered from fly ashes of two power stations in Russia from burning of high- and low-reactivity high-ash coals; the known results of studies of char particles generated in laboratory conditions from coals characterized according to the ASTM D388-98a standard were also used. The composition of organic and mineral components of different fraction char particles was studied. An inverse correlation between the content of the organic substance and the iron content in char particles was identified. The morphology of the char particles for the three main types (Cenospheric, Network and Solid) and the influence of coal reactivity and temperature on char morphology were investigated. The morphology of the mineral component of char particles of the two varieties of coals was also studied. It was shown that the high-temperature of industrial burning of Ekibastuz coal results in melting of the mineral substance and forming of micron-scale microspheres located in the lamellar porous structure of the carbon matrix.     

Characterization of sintered coal fly ashes

Çan, Çatala?z?, Seyitömer and Af?in-Elbistan thermal power plant fly ashes were used to investigate the sintering behavior of fly ashes. For this purpose, coal fly ash samples were sintered to form ceramic materials without the addition of any inorganic additives or organic binders. In sample preparation, 1.5 g of fly ash was mixed in a mortar with water. Fly ash samples were uniaxially pressed at 40 MPa to achieve a reasonable strength. The powder compacts were sintered in air. X-ray diffraction analysis revealed that quartz (SiO₂), mullite (Al₆Si₂O₁₃), anorthite (CaAl₂Si₂O₈), gehlenite (Ca₂Al₂SiO₇) and wollastonite (CaSiO₃) phases occurred in the sintered samples. Scanning electron microscopy investigations were conducted on the sintered coal fly ash samples to investigate the microstructural evolution of the samples. Different crystalline structures were observed in the sintered samples. The sintered samples were obtained having high density, low water adsorption and porosity values. Higher Al₂O₃ + SiO₂ contents caused to better properties in the sintered materials.     

粉煤灰少熟料水泥的研究

采用复合外加剂充分激发粉煤灰潜在活性，配制出早期强度较高的３２５＃少熟料水泥。本文介绍该水泥的配制原理与方法，分析了代替普通水泥配制建筑砂浆的可行性。     

Heat evolution of high-volume fly ash concrete

In this paper, the results of a laboratory investigation conducted with heat evolution of high-volume fly ash (HVFA) concrete are presented. Heat evolution of concrete was studied by measuring the temperature increase in concrete under adiabatic curing condition. Characteristic of heat evolution of fly ash concrete was found to be strongly dependent on the replacement level of fly ash and dosage of superplasticizer used to maintain workability. It was also found that using fly ash as cement replacement resulted in a reduction on the maximum temperature rise. Increasing the replacement level of fly ash caused lower temperature rise in concrete. Superplasticizer caused a delay in peak temperature rise time; this is taken as an indicator that high-dosage superplasticizer used in concrete caused retardation in hydration of cement. Concretes having similar ingredients showed similar peak temperature rise whether they are superplasticized or not.     

Influence of cage design on precision of tube-trap bioassay for attractants of the onion fly,Delia antiqua

Responses of onion flies,Delia antiqua, to known attractants were measured in the laboratory with a novel tube-trap bioassay. The relative numbers of flies caught in tube traps baited with enzymatic yeast hydrolysate, brewer's yeast, andn-dipropyl disulfide were similar to those obtained previously with cone traps in the field. Changing the shape of the bioassay cage from a cuboid to a cylinder decreased the experimental error obtained from analysis of variance, as did rotating the floor of the circular cage. This bioassay should be useful in evaluating attractants for other insects that orient along the substrate.Diptera: Anthomyiidae.Paper No. 11327 of the Michigan State University Agricultural Experiment Station. Received for publication June 8, 1984.     

转炉煤气风机叶轮故障诊断及处理措施

对转炉煤气风机叶轮故障进行诊断,分析了故障产生的原因,提出了处理措施,延长了设备使用寿命。     

降低锅炉飞灰可燃物的途径

介绍在发电厂锅炉运行过程中降低燃烧低挥发分高热值燃料飞灰含碳量的途径     

无机灰分对餐厨沼渣中有机质热解特性的影响

针对餐厨垃圾厌氧处理所产生的沼渣具有产量大、灰分质量分数高的特点,研究沼渣中无机灰分对其热解过程的影响. 通过热重分析和热裂解?气相色谱质谱联用技术（Py-GC/MS）分析沼渣热解动力学特性及其产物. 动力学分析结果表明,沼渣除灰后,失重速率显著提高,热解起始温度由180 ℃降至160 ℃. 除灰沼渣的总表观活化能比沼渣的略高,原因可能是除灰使沼渣内部孔隙增加,在促进挥发分析出的同时,削弱了部分组分在热解过程中的催化裂解作用. 产物分析结果表明,NaCl能够促进油相产物中烃类向酮类的转化,ZnCl₂通过促进酸类的脱羧作用,使烃类质量分数提高至66.8%;Fe₂O₃和Al₂O₃使烃类物质的质量分数分别提高至66.8%和72.7%,CaO和MgO可以促进酸类脱羧生成酮,使产物中酮类的质量分数高达46.5%和39.4%.