铵盐体系香波泡沫性能的研究

研究了两种铵盐型阴离子表面活性剂与烷基单乙醇酰胺、烷基二乙醇酰胺等复配体系在不同水硬度条件下的泡沫性能 ;考察了乳化硅油、羊毛脂、十八醇、珠光剂、香精、阳离子表面活性剂及聚合阳离子化合物等添加剂在香波体系中不同水硬度条件下对发泡性能的影响。实验条件下所有体系的稳泡性均较好 ,LSA与AESA复配后泡沫力增大 ,其中AE SA含量需 <1 0 % ;含烷基单乙醇酰胺香波体系的泡沫性能优于含烷基二乙醇酰胺的 ;羊毛脂和乳化硅油对香波泡沫的影响较大 ,而其它添加剂对香波泡沫的影响不大。     

冰箱用聚氨酯泡沫塑料的密度分布机理及配方优化

对冰箱用聚氨酯泡沫塑料的密度分布机理进行了探讨,为配方和工艺优化提供了有价值的参考,并通过对密度分布的研究来解决冰箱泡沫的其他性能缺陷。     

茂金属乙烯/苯乙烯假无规共聚物(ESI)的研究进展

乙烯／苯乙烯假无规共聚物（ESI）是一类新型的茂金属聚合物，通常苯乙烯质量分数可达80％，随苯乙烯的质量分数增加，ESI由半晶态的弹性体材料过渡到非晶态的热塑性塑料，笔者综述了近年来国外茂金属乙烯－苯乙烯假无规共聚物（ESI）研究与开发的新进展，重点介绍了ESI的物理性能，合成工艺，共混性能，填充性能，膜塑性能及发泡性能，并论述了ESI的应用现状和发展趋势。     

Biomimetic Polymer Nanostructures by Injection Molding

The nanometer scale topography of self‐assembling structural protein complexes in animals is believed to induce favorable cell responses. An important example of such nanostructured biological complexes is fibrillar collagen that possesses a cross‐striation structure with a periodicity of 69 nm and a peak‐to‐valley distance of 4–6 nm. Bovine collagen type I was assembled into fibrillar structures in vitro and sedimented onto solid supports. Their structural motif was transferred into a nickel replica by physical vapor deposition of a small‐grained metal layer followed by galvanic plating. The resulting inverted nickel structure was found to faithfully present most of the micrometer and nanometer scale topography of the biological original. This nickel replica was used as a die for the injection molding of a range of different thermoplastic polymers. Total injection molding cycle times were in the range of 30–45 seconds. One of the polymer materials investigated, polyethylene, displayed poor replication of the biological nanotopographical motif. However, the majority of the polymers showed very high replication fidelity as witnessed by their ability to replicate the cross‐striation features of less than 5 nm height difference. The latter group of materials includes poly(propylene), poly(methyl methacrylate), poly(L ‐lactic acid), polycaprolactone, and a copolymer of cyclic and linear olefins (COC). This work suggests that the current limiting factor for the injection molding of nanometer scale topography in thermoplastic polymers lies with the grain size of the initial metal coating of the mold rather than the polymers themselves.

     

气辅注射工艺参数对气体穿透能力的影响

以某轿车后车门杂物箱盖为例，利用Moldflow软件和正交实验法，评价气体辅助注射成型的主要工艺参数对气体穿透能力和气辅零件质量的影响，并给出一组优化后的工艺参数。     

Computer simulation of the filling process in gas‐assisted injection molding based on gas‐penetration modeling

Gas‐assisted injection molding can effectively produce parts free of sink marks in thick sections and free of warpage in long plates. This article concerns the numerical simulation of melt flow and gas penetration during the filling stage in gas‐assisted injection molding. By taking the influence of gas penetration on the melt flow as boundary conditions of the melt‐filling region, a hybrid finite‐element/finite‐difference method similar to conventional‐injection molding simulation was used in the gas‐assisted injection molding‐filling simulation. For gas penetration within the gas channel, an analytical formulation of the gas‐penetration thickness ratio was deduced based on the matching asymptotic expansion method. Finally, an experiment was employed to verify this proposed simulation scheme and gas‐penetration model, by comparing the results of the experiment with the simulation. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2377–2384, 2003     

聚合物系的挥发分脱除——起泡脱挥机理及模型

聚合物系的挥发分脱除(以下简称脱挥)是聚合物生产中的关键工艺之一。本文对国外有关聚合物系脱挥领域的文献作了综述,介绍了聚合物脱挥的基本概念,重点描述了起泡脱挥传质中气泡的成核、生长、破裂,气泡合并、凝聚的机理以及它们的表达式,并介绍了几种起泡脱挥的模型。     

用硫铁矿焙烧粉尘制硬质塑料管的研究

用硫酸厂硫铁矿焙烧后的粉尘掺入聚氯乙烯中，用挤出成型法挤制硬质聚氯乙烯塑料管，以扩大聚氯乙烯塑料的用途。     

Evaluation and characterization of ammoniumpolyphosphate–pentaerythritol‐based systems for intumescent coatings

Intumescent coatings are increasingly used as a method of passive fire protection on steel constructions. By forming a carbon network and releasing a blowing agent, the thin intumescent film swells 100‐fold at elevated temperatures. The highly insulating foam effectively prevents the load bearing steel from reaching its critical temperature at which it looses its mechanical properties and collapses. The role of the carbon donor in intumescent coatings has been studied. Comparison in temperature development, foaming ratios, and rheological behavior has been performed between formulations containing pentaerythritol (penta), di–penta, and tri–penta. A simulated fire test, in which the temperature development during intumescence was studied, showed that the formulations containing penta were considerably more efficient in keeping a low temperature throughout the process. A more rapid temperature development was displayed when using di–penta and tri–penta as the carbon donor. Rheometer tests indicate that penta formulations enter the intumescent process at a lower temperature and stays in it for a longer time than di–penta and tri–penta formulations. Furthermore, the crossover temperature and maximum phase angle are shifted towards higher temperatures by replacing penta with di–penta and with tri–penta in the formulations, respectively. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 748–753, 2007     

阻燃性软质聚氨酯泡沫塑料的研制

以自制的聚醚多元醇为原料，加入经粉碎并表面处理的三聚氰胺和阻燃剂Ｔ２０１制得阻燃性软质聚氨酯泡沫塑料。系统地考察了配方中的两种阻燃剂用量，特种聚醚多元醇和泡沫密度对泡沫塑料阻燃性和物理性能的影响。