电镀塑料制品对结构设计及成形工艺的要求

为保证电镀塑料制品的质量,提出了符合电镀要求的塑料制品设计原则,并且指出在注塑成形时,对塑料经过充分干燥,采用较高的注塑温度,较低的注射压力和较慢的注射速度,是使镀层获得良好结合强度的先决条件。     

A Constraint-Based Approach for Deriving 3-D Structures of Cyclic Polypeptides

This paper presents an hybrid algorithm for deriving 3-D structures of cyclic polypeptides. The algorithm combines constraint-based techniques with the most widely used methods for non-cyclic polypeptides. The empirical results demonstrate that the proposed hybrid algorithm outperforms traditional methods especially with respect to running times.     

MOLDFLOW在产品注塑分析中的应用研究

由于产品的注塑成型过程非常复杂，而注塑的计算机模拟能比较准确的预测产品的质量和存在的问题。本文介绍了Moldflow软件MPI／Stress中的MPI／Cool、MPI／Flow、MPI／Warpage模块的作用，并以标准齿轮为例进行了冷却、模流和翘曲分析，分析和讨论了影响产品质量的主要原因和问题。     

Process Modeling for Precision Forming of Discrete Parts – State of the Technology and Critical Issues

This paper presents an overview on the application of FE simulation as a virtual manufacturing tool in designing manufacturing processes for precision parts. The processes discussed include forging, sheet metal forming and hydroforming. Determination of reliable input parameters to simulate a process is a key element in successful application of process simulation for process design in all the mentioned areas. These issues are discussed in detail. Practical examples of application of FE simulation are presented for improvement of the existing metal forming process and/or designing new metal forming process for manufacturing discrete precision parts in forging, sheet metal forming and hydroforming.     

Stresses in bent copper tubing: Application to fatigue and stress-corrosion cracking failure mechanisms

The residual and applied stresses in u-bent copper tubing are addressed in the context of both cyclic fatigue and stress-corrosion cracking. Failures as a result of fatigue and stress corrosion cracking in u-bent copper tubing have been observed to initiate at nonintuitive locations when only the applied stresses on the component are considered. This paper presents both qualitative classical and quantitative finite-element stress analysis results for the forming of u-bends. The resulting residual stress distributions are compared to fracture patterns generated by both fatigue and stress-corrosion cracking mechanisms.     

金属板材无模成形加工轨迹生成的研究

介绍了一种采用快速原型制造原理的金属板材无模成形技术．根据快速成形技术中分层制造的思想，从板材无模成形的技术特点出发，采用基于STL文件的金属板材无模成形的加工轨迹生成方法，通过构造STL文件的等距模型并对其进行切片，得到加工轨迹。     

Al-Si合金在凝固过程中颗粒和枝晶组织的演变

通过改变和控制浇注温度、冷却速度和半固态保温时间，研究了亚共晶Al-Si合金在不同凝固条件下初生相形貌的演变。结果表明．浇注温度对初生相形貌的影响最大。当浇注温度在液相线附近，冷却速度为0．3℃／s，并在半固态状态下保温1～5min的条件下，初生相为理想的颗粒状组织。随着浇注温度和冷却速度的提高，初生相由颗粒状向枝晶组织演变。此外，添加晶粒细化剂有利于颗粒组织的形成。在试验的基础上，采用改进的Cellular Automaton(MCA)模型进行计算机数值模拟，研究了Al-Si合金在凝固过程中初生相的演变机制。     

贵州水城观音山铁矿成矿构造体系分析

文章应用地质力学的理论和方法，通过对贵州水城观音山铁矿区内结构面力学性质的鉴定，将区内构造形迹划分为三种类型的构造体系，并在此基础上，通过对矿区内矿床的控矿构造型式进行分析，确立了属于威宁弧形构造的北西构造带为成矿期构造体系。     

金属粉末喷射成型技术与应用

提出了金属粉末成型工艺原理和粉末高速钢喷射成型技术的工艺过程、组织结构、工艺特点及其在新产品开发、工具、模具制造中的应用。     

几种新型的多选择性天线分集

基于发射端和接收端都具有完整的信道状态信息假设 ,提出了 3种新型的用于多发送天线多接收天线的天线分集技术 :多选择分集、多选择反相分集和扩展的多选择反相分集技术 ,并对其进行了性能仿真。这 3种方案较之传统的选择性分集只需增加非常小的硬件复杂度 ,就能显著提高信噪比性能 ,达到降低功耗 ,提高系统性能的目的