发展我国冻干蔬菜产业大有可为

本文介绍了真空冷冻干燥食品的发展现状、特点及其工艺流程 ,着重讨论了发展冻干食品工业的广阔前景     

某微型起爆器引起的一起误爆事故分析

该文分析某微型起爆器引起的一起误爆事故，指出该起爆器设计上的缺陷及其对作业安全的威胁，提出防患建议。     

MKR──一种有效的增量式概念获取系统

本文对示例式学习的ＩＤ５Ｒ算法进行了深入的研究并作了进一步的改进，提高了其计算效率．并提出一种适合于增量式学习的抗干扰机制，拓广了算法的适用范围．     

Real-World Robotics: Learning to Plan for Robust Execution

In executing classical plans in the real world, small discrepancies between a planner's internal representations and the real world are unavoidable. These can conspire to cause real-world failures even though the planner is sound and, therefore, proves that a sequence of actions achieves the goal. Permissive planning, a machine learning extension to classical planning, is one response to this difficulty. This paper describes the permissive planning approach and presents GRASPER, a permissive planning robotic system that learns to robustly pick up novel objects.     

反向回转双激振器振动机控制同步的理论研究

本文对两激振器作反向回转的振动机控制同步进行了理论研究和计算机仿真。推导出了考虑质心偏移时两主轴的转矩差方程，在此基础上建立了控制系统的数学模型，设计了具有鲁棒性的非线性变结构滑模控制器．仿真结果表明，控制同步不仅可以消除由质心偏移、电机特性差等原因引起的稳态相位差，同时还能大大降低瞬态相位差，从而使机体的振动方向保持不变，减小起、制动过程中机体的摇摆振动．     

填料萃取塔液泛速度的计算

介绍了三种有代表性的填料萃取塔的液泛速度计算公式，并通过它们用于三种典型的液-液实验体系和两种不同填料的计算结果的比较，对这些公式的适用范围进行了讨论。     

Review: Modified Atmosphere Packaging and its effects on the microbiological quality and safety of produce

Modified Atmosphere Packaging and related technologies are increasingly used to extend shelf-life of fresh produce. This paper reviews the effect of such technology on the spoilage microbiological flora and food-borne pathogens which may be present in produce and also on the organoleptic properties of the product.     

Machine assignment and part-families formation using group technology

The conventional way of solving the group technology (GT) problem is to start from an assignment of parts to machines and try to find a partitioning of machine cells and part families. The similarity between parts is measured based on commonality of the machines assigned to them. However, parts are assigned to machines based on their operation requirements and the operation capabilities of machines. Similarity between parts should be based on their required operations. In this paper, the authors attempt to solve or facilitate solving the GT problem at the assignment level. An algorithm for assigning parts to machines is provided which utilizes the types of operations required by parts and applies GT principles in producing the assignment. This leads to better partitioning of machine cells and part-families. Furthermore, operation sequences required by parts in determining the similarity between parts have been considered. An algorithm to form part-families based on the operation sequence similarity coefficient has been developed. The resulting families are then used by the assignment algorithm to produce machine assignments to part-families. The use of the algorithm is demonstrated by examples.     

落脚河水电站引水发电系统的调节保证计算分析

水轮发电机组在运行中遇到启动、正常停机、增减负荷、事故甩负荷等工况变化时，经常会引起引水发电系统的水力过渡过程，所以在设计中必须通过调节保证计算以选择合适的导叶调节规律及其调节时间，从而优化压力引水系统的运行工况，使水电站的水工建筑物布置既经济合理又安全可靠。