Microstructure evolution during metal forming processes

Recrystallization and grain growth evolutions during metal forming processes are considered. Coupling between the thermo-mechanical and microstructure processes is realized. Die forging of a rear-axle flange is simulated numerically on the base of the finite element method. Material parameters of the models are obtained experimentally. The influence of interpass and holding times on grain size distributions in the end product is shown.     

Determination of Flow Curves at High Strain Rates using the Electromagnetic Forming Process and an Iterative Finite Element Simulation Scheme

The knowledge of reliable material parameters is an essential requirement for the numerical analysis and planning of forming processes, especially when using high speed forming processes in industry. Therefore, a method was developed and implemented to determine the relationship between yield stress, plastic strain, and strain rate of aluminium alloys at very high strain rates of up to 10,000 s-1 by using the electromagnetic forming process (EMF) of tubular specimens. To determine the associated flow curves, an inverse engineering strategy combining an online measurement technique and multi-physical coupled finite element simulations is used. The results are discussed with regard to the anisotropic behaviour of specific aluminium alloys.     

Simulation of the Forming Behaviour of a Boron Modified P91 Ferritic Steel

The forming behaviour at high temperature of a modified 9%Cr‐1%Mo (P91) ferritic steel containing B and Ti for elevated temperature service was investigated. The microstructure of the as‐received material is mainly martensite at room temperature, but special etching revealed prior austenite grains of about 25 μm in size. Torsion tests were conducted at temperatures in the range 850 to 1250 °C to simulate the hot rolling process under comparable conditions of temperature, strain rate and strain. The deformation data obtained from these tests were correlated with the Garofalo equation with a stress exponent of 4.6 and an activation energy of 315 kJ/mol. This equation was used to predict the formability behaviour for the rolling process and also to determine the maximum forming efficiency and stability of the steel. A temperature of 1200 °C is recommended to conduct the forming process.     

服装设计中分割线的应用

分割线在服装设计中的作用极其重要 ,它既具有造型特点 ,又具有功能特点 ,从分割线的效果阐述了分割线在服装设计中的应用。     

Wave drift force in a two-layer fluid of finite depth

Based on the momentum and energy conservation principles, a compact calculation formula is analytically derived for the wave-drift force on a 2-D body floating in a two-layer fluid of finite depth. In a two-layer fluid, two different wave modes (the surface-wave mode with longer wavelength and the internal-wave mode with shorter wavelength) exist not only in the incident wave but also in the body-scattered wave, and these wave characteristics are properly incorporated in the obtained formula. It is noted that, unlike the single-layer case, the wave-drift force can be negative in the incident wave of surface-wave mode, if the transmitted wave with internal-wave mode is large. Numerical computations are implemented for a Lewis-form body by means of the boundary-integral-equation method with Green’s function for the two-layer fluid problem. The effects of density ratio, interface position, and body motions on the wave-drift force are studied, and some important features are found for two-layer fluids.     

叠前深度偏移中的旅行时并行计算技术

旅行时计算技术是基于波动方程叠前深度偏移方法的核心内容，射线跟踪的数值计算精度和效率直接影响着介质成像质量和实用化。基于三维射线跟踪的微变网络方法和波前重建思路，提出一种适用于三维复杂介质地震波走时的快速算法。但它所需计算量巨大。采用并行计算技术，设计出基于“任务缓冲池”的动态负载平衡策略，在现有的分布式计算机上，实现了三维射线追踪和叠前深度偏移的并行计算。     

ԥ�������С��¶���ͳ��������

豫西地区中、下二叠统太原组、山西组、上石盒子组及下石盒子组煤成气资源丰富，但成煤环境纵向发育与横向变化较大，规律难于把握。因此，开展煤成气源岩沉积环境研究有利于该区煤成气资源的勘探与开发及合理的利用。通过露头、钻井、地震资料及分析、测试资料的综合研究认为：本区中、下二叠统主要沉积了一套浅海碳酸盐岩，海湾-泻湖、潮坪、沼泽、障壁岛(砂质滩、坝)及三角洲相陆源碎屑岩和煤层。从总的沉积特征来看，下二叠统太原组、山西组基本上发育滨、浅海相碳酸盐岩、陆源碎屑岩和煤的混合沉积。上二叠统上、下石盒子组则以海陆交互相陆源碎屑沉积为主，三角洲及三角洲平原沼泽十分发育；沉积环境具有自下而上，自南东向北西方向由海相逐步过渡为陆相的基本特点。其煤成气源岩沉积环境以早二叠世山西期潮坪、泻湖过渡带之滨岸沼泽环境为最佳，其次为中二叠世下石盒子期三角洲平原沉积之平原沼泽环境。     

Failures of retrieval and comparison constrain change detection in natural scenes.

In a change detection paradigm, a target object in a natural scene either rotated in depth, was replaced by another object token, or remained the same. Change detection performance was reliably higher when a target postcue allowed participants to restrict retrieval and comparison processes to the target object (Experiment 1). Change detection performance remained excellent when the target object was not attended at change (Experiment 2) and when a concurrent verbal working memory load minimized the possibility of verbal encoding. (Experiment 3). Together, these data demonstrate that visual representations accumulate in memory from attended objects as the eyes and attention are oriented within a scene and that change blindness derives, at least in part, from retrieval and comparison failure. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

三维合成炮叠前深度偏移

对国际上标准的SEG/EAEG模型进行了三维合成炮叠前偏移研究。与三维单炮叠前深度偏移不同 ,三维合成炮叠前偏移有一个叠前数据的合成过程 ,由于合成后数据量大大减少 ,所以合成炮偏移的计算量要比单炮偏移小得多。阐述了三维合成炮叠前偏移的实现过程 ,给出了相应公式。对SEG/EAEG盐丘模型的一个数据集进行了MPI并行计算 ,取得了良好的成像效果。所作的较多计算表明了三维合成炮叠前偏移的正确性和有效性 ,这为野外实际数据的三维叠前深度偏移提供了另一条有效途径。     

考虑渗流力的基坑涌砂分析

本文根据基坑防渗帷幕周围的地下水渗流特征，分析了渗流力对基坑流砂的影响，提出了按涌砂安全系数进行防渗帷幕埋入深度计算的方法。