复杂不规则刚体转动惯量的测试原理和方法

为了测量复杂不规则刚体转动惯量，采用时间常数法，通过A/D卡PS2129的定时/计数器8253高精度测速、计时，能较好地应用于测量转动惯量。     

加固改造中的结构承重体系转换

从加固改造工程的实践出发 ,探讨了混合结构向框架结构体系转换的方法和构造措施 ,为实际工程提供了新的技术思路     

Equitone Predicate Algebras and Their Applications

Predicates that preserve their values on a larger (extended) body of data are called equitone. An algebra of such predicates is constructed, a system of its generators is specified, and a complete system of transformations of identities is defined. The results obtained are used for construction and investigation of complete classes of compositions of various types and levels of abstractions that are used in logics of partial predicates.     

岩金矿山采空区处理现状及对策

岩金矿山以浅眼留矿法为代表的空场采矿法为主要开采手段，约占50％，每年形成数百万m^3采空区，并绝大多数未进行专门处理。本文介绍数例岩金矿山采空区处理方法及效果与对策，供有关企业参考。     

Powder Deposition in Three Parallel-Oriented Dies of Different Shapes

Uniformity of bulk density distribution during the die filling process is required to minimize quality problems, such as distortion and cracking, for powder compacts. Understanding the die filling process is necessary in ensuring a uniform powder deposition. The second-generation pressure deposition tester (PDT-II) was used to investigate the deposition process and final pressure distribution of powder filling in toroidal, cylindrical, and E-shaped dies. All tests were conducted using a spray-dried free-flowing granular powder. The results indicated that for toroidal dies: (1) the area around 0° orientation (the leeward end) had the highest pressure values (1186.7 to 2498.0 Pa), with the average pressure values of the remaining area 353.7-648.0 Pa; (2) the pressure distribution was symmetrical about the centerline parallel to the feed shoe movement direction; (3) the highest feed shoe speed (500 mm/s) led to the most nonuniform pressure distribution among the three speeds; (4) higher feed shoe speed did not always result in higher final pressure values; and (5) the right die tended to have higher final pressure values (215.0 to 2498.0 Pa) than the center die (95.4 to 2052.5 Pa). For E-shaped dies: (1) the final pressure values of the middle leg (308.9 to 760.7 Pa) were higher than those of the left and the right legs (148.9 to 530.3 Pa); (2) the area along the backside had the highest final pressure value (1054.6 to 1303.8 Pa); (3) the pressure distribution was symmetrical about the centerline parallel to the feed shoe movement direction; and (4) neither the center die nor the right die always had higher pressure values than the other one at all locations. Comparison between cylindrical and toroidal dies indicated that: (1) neither of the two die shapes (cylinder and toroid) led to consistently higher or lower final pressure values at all locations and (2) for all three feed shoe speeds, the toroidal die had higher average final pressure values in the 0° orientation.     

焚烧炉控制系统

化工废气、废液焚烧炉是一种常用的环保处理装置，就其工艺详细介绍焚烧炉燃烧过程的控制及其安全联锁措施。     

浅谈引进采掘设备应考虑的几个问题

引进采掘设备是个复杂的工作，它不但牵涉到采矿能力的提高，同时也要考虑相应工艺的配套和设备管理所带来的问题，因此，引进采掘设备必须系统研究。     

钢管打捆包装机的设计

为了提高包装质量，取代原人工打捆，设计开发了钢管打捆包装机，该包装机采用碾拉工艺，通过综合分析拉紧与绞纽组合动作的传动，实现了钢管的打捆包装机械化，使钢管包装质量达到了ISO9000标准要求，同时降低了劳动强度。     

镁基储氢材料的研究进展

本文回顾和总结了近几十年来，特别是近十年来镁基储氢材料的发展情况，重点综述了机械合金化Mg-Ni2合金体系的研究情况及其近期的进展，从储氢材料成份及配比，制造工艺改进以及材料的组织结构对材料性能的影响等各方面进行一定的分析和归纳，对储氢材料研究中出现的问题以及今后的发展方向都作了探讨。     

浅谈计算机在建筑物修复改造鉴定中的应用

计算机应用技术伴随着行业工程技术的发展同步开发。它已广泛应用于建筑工程中。从三个方面分析了计算机在建筑工程中的应用问题：1）在建筑物可靠鉴定领域、工程设计、管理中的应用；2）不足：包括计算机软件的开发受限制，已开发软件的局限性，已有档案资料复用技术水平低，缺乏资料共享、信息库支援；3）发展方向：建立强大信息库，开发全面应用系统，日常使用管理系统，典型问题治理专家系统。并提出未来发展重点－信息库（共享）机制。