中小批量铸铁车间就地技术改造

采用相互兼顾的原则，进行中小批量的铸铁车间就地技术改造，较好地解决了工人劳动强度、作业环境、铸件质量、产量与技改投入的矛盾。     

四异丁氧基镍酞菁的合成及其溶剂效应

4 异丁氧基邻苯二腈与氯化镍在强有机碱 1 ,8 二氮杂双环 (5 ,4,0 )十一碳烯 7催化下反应 ,合成了四异丁氧基镍酞菁 ,产物经FT -IR、元素分析、UV -Vis吸收光谱和1 H NMR表征了结构 ;并研究了其溶剂效应 ,结果表明 :最大吸收峰波数ν与函数 f(n ,ε)存在一定的线性关系 ,线性相关系数为 0 940 2 ,而Bayliss函数项 (n2 - 1 ) /(2n2 +1 )决定了最大吸收波长 (λmax)的位移变化 ;化合物的λmax在不同溶剂中随聚集程度增加 ,发生一定程度的蓝移     

Methane Transport Capacity of Rice Plants. II. Variations Among Different Rice Cultivars and Relationship with Morphological Characteristics

Of the total methane (CH4) emitted from a rice field during the growing season 60–90% is emitted through the rice plants. We determined the methane transport capacity (MTC) of rice plants at different physiological growth stages using an automatic measuring system under greenhouse conditions. A total of 12 cultivars (10 inbred varieties and 2 hybrids) were studied in sets of two experiments and was distinguished into three groups according to the patterns of MTC development. MTC is generally increasing from seedling stage to panicle initiation (PI), but differs in the development from PI to maturity. While the hybrid showed a gradual increase in MTC, the inbred cultivars showed either minor changes in MTC or a drastic decrease from flowering to maturity. Among tall cultivars, Dular showed the highest MTC, followed by B40; the lowest MTC was found in Intan. High-yielding dwarf cultivars showed MTC in the descending order of IR72 > IR52 > IR64 > PSBRc 20. New plant type cultivars showed very low MTC with IR65600 exhibiting the smallest MTC at PI, flowering, and maturity. Hybrids (Magat and APHR 2) showed the largest MTC that continued to increased with plant growth. The MTC patterns were attributed to growth parameters and the development of morphological characteristics of the aerenchyma. These results suggest that in tall, dwarf, and NPT cultivars, increase in root or aboveground biomass during initial growth determines a corresponding increase in MTC. Once aerenchyma has fully developed, further increase in plant biomass would not influence MTC. However, in the case of hybrids, a positive relationship of MTC with root + shoot biomass (r = 0.672, p 0.05) and a total plant biomass including grain (r = 0.849, p 0.01) indicate continuous development of aerenchyma with plant growth, resulting in enhanced MTC. In all cultivars, tiller number, but not height, was linearly related to MTC, indicating that the number of outlets/channels rather than plant size/biomass determines the transport of CH₄. These results clearly demonstrate that rice cultivars differ significantly in MTC. Therefore, the use of high-yielding cultivars with low MTC (for example, PSBRc 20, IR65598, and IR65600) could be an economically feasible, environmentally sound, and promising approach to mitigate CH₄ emissions from rice fields.     

Failure mode and effects analysis using D numbers and grey relational projection method

Failure mode and effects analysis (FMEA) is a widely used risk assessment tool for defining, identifying and eliminating potential failures or problems in products, process, designs and services. Two critical issues of FMEA are the representation and handling of various types of assessments and the determination of risk priorities of failure modes. Many different approaches have been suggested to enhance the performance of traditional FMEA; however, deficiencies exist in these approaches. In this paper, based on a more effective representation of uncertain information, called D numbers, and an improved grey relational analysis method, grey relational projection (GRP), a new risk priority model is proposed for the risk evaluation in FMEA. In the proposed model, the assessment results of risk factors given by FMEA team members are expressed and modeled by D numbers. The GRP method is used to determine the risk priority order of the failure modes that have been identified. Finally, an illustrative case is provided to demonstrate the effectiveness and practicality of the proposed model.     

负摩阻力计算及对桩承载力的影响

探讨了负摩阻力的计算方法及考虑负摩阻力时对桩承载力的验算，对软土层超过１５米，上部堆载大或地下水位大幅度下降地区的桩，尤其是端承桩而言，具有较大的工程实际意义。     

On the preparation and properties of CuZSM-5 catalysts for NO decomposition

Equilibrium exchange isotherms were determined for the exchange of Cu²⁺ with NaZSM-5 at varying Cu(Ac)₂ concentrations in solutions of constant volume and zeolite weight. At low Cu²⁺ levels the solid scavenged all the copper ions. When copper could be detected in the equilibrated solutions, overexchange was observed. The extent of overexchange was higher at pH 6 than at pH 4. These results were analyzed in relation to catalytic activity.On leave from the Central Institute for Chemistry, Hungarian Academy of Sciences, H1525 Budapest, Hungary.     

WALL AND PARTICLE-SHAPE EFFECTS ON HEAT TRANSFER IN PACKED BEDS

The effective radial thermal conductivity and apparent heat transfer coefficient for a packed bed were experimentally determined for beds of spheres, full cylinders and hollow cylinders, for flow rates giving particle Reynolds numbers in the range 100-1000, and for tube to particle diameter ratios of 5-12. Over these ranges the radial Peclet number Pe_r showed significant dependence on solid conductivity, gas flow rate and particle shape, while the wall Biot number Bi showed significant dependence on tube to particle diameter ratio, gas flow rate and particle shape. These dependencies were predicted well by equations incorporating the effects of these variables into individual gas and solid phase parameters, which were then combined to give the effective or lumped parameters     

Peel Adhesion of Poly(Vinyl Chloride) to Nitrile Rubbers

In addition to molecular interaction and physical entanglement of the molecular chains across the interface in poly (vinyl chloride)-nitrile rubber joints, at high temperatures and long contact times interfacial chemical bonds may be formed which seem to couple the two adherends thereby resulting in cohesive failure of the rubber matrix on peeling. This is verified by performing the peel tests at high temperatures, low peel rates and under swollen conditions. Infrared spectroscopic studies of the PVC/NBR blend reveal the formation of chemical bonds at the contact temperatures studied. The peel fracture energy is found to depend on the acrylonitrile content and presence of carboxylic content in the NBR, and the presence of stabilizer and plasticizer in the PVC phase, in addition to the molding and testing conditions.     

CaSO4晶须/聚氨酯弹性体复合材料性能的研究

笔者主要研究了CaSO4晶须对聚氨酯弹性体复合材料热性能和摩擦性能的影响。随Ca-SO4晶须含量的增加，复合材料的起始分解温度被提高，加入CaSO4晶须并未改变聚氨酯弹性体的化学结构，只是减慢了聚氨酯弹性体的热失重速率；随着CaSO4晶须含量的增加，聚氨酯弹性体复合材料的磨耗量降低。分析认为，加入CaSO4晶须后。阻止了聚氨酯弹性体结构的大面积破坏，改变了磨屑的形成机理，使其由纯聚氨酯的大的片状磨屑变为复合材料的小磨屑，从而降低了聚氨酯复合材料的磨损。     

Synthesis and characterization of polyurea microcapsules containing essential oils with antigerminative activity

In this paper we report on the preparation and characterization of polyurea‐based microencapsulated systems, containing essential oils as core materials, for potential applications in controlled‐release formulations of agrochemicals. Microcapsules were synthesized by interfacial polymerization in o/w emulsion between polyfunctional isocyanates and diamines, to investigate the effect of the monomer kind on the morphology and properties of the produced samples. The synthetic conditions that gave the best results were used to microencapsulate four essential oils, able to interfere with the seed germination and radicle elongation of some test plants. The produced samples were characterized, with the aim to analyze their morphology and to verify the effectiveness of essential oil microencapsulation. Moreover, preliminary bioassay based on seed germination and subsequent radical growth were carried out to study the effects of the microencapsulated essential oils. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007