脉冲电化学光整加工的流场及间隙特性

通过系统的试验研究，分析了工作液流场分布、流量、加工间隙等工艺参数对加工质量的影响。研究结果表明：合理控制加工间隙和工作液流场分布，对保证加工表面的质量极为重要；在优选的工艺参数下，可快速获得优质表面。     

热卷箱弯曲辊辊缝及抬起速度探讨

通过分析热卷箱卷取过程中带钢弯曲成形的变形原理,推导出了弯曲辊辊缝的数学模型和辊缝抬起速度模型,并针对实际卷取过程中第1圈“不圆”现象进行了理论分析,提出了增加上弯曲辊速度超前率的解决措施。     

a-C:F:H films prepared by PECVD

Fluorinated amorphous hydrogenated a-C:F:H carbon thin films were deposited using radio frequency plasma enhanced chemical vapor deposition(RF-PECVD) reactor with CF4 and CH4 as source gases and were annealed in a N2 atmosphere. The properties of these films were evaluated by FTIR spectrometry, UV-VIS spectrophotometry and single-wavelength spectroscopic ellipsometry. A correspondence relativity connection between the deposition rate and technology was found. The chemical bonding structures and the content of CHx and CFx in the films are transformed and the optical band gap decreases monotonically with increasing temperature after annealing.The dielectric constant is increased with decreasing content of F in the films and the optical band gap is decreased with decreasing the content of H in the film.     

高频群脉冲电解加工控制系统研究

介绍了高频群脉冲电解加工的控制系统，其核心部件由PMAC运动控制器和PCL-818HD多功能数据采集板构成，主要功能包括控制工具阴极进给、极间加工间隙及短路保护等。实验表明，该控制系统能保证加工的高精度、稳定性及可靠性。     

Investigation of micro-EDM material removal characteristics using single RC-pulse discharges

Similar to EDM, in micro-EDM, intense heat is generated between the workpiece and tool electrode by the discharge through a dielectric medium to result in the formation of a microcrater that is much smaller in size. In this study, a single-spark generator has been developed to study the erosion characteristics from the microcrater size. Using a simple heat transfer model, the efficiency at different discharge condition is also deduced. It is found that at lower-energy (<50 μJ) discharges, the energy required to remove the unit volume of material, defined as the specific energy, is found to be much less than that at higher-energy discharges. Additionally, the ratio of the standard deviation to the measured microcrater size is found to be lower at lower discharge energy, indicating greater consistency in shape and size when the discharge occurs at lower energy. The fundamental erosion mechanism of material is discussed by considering melting and evaporation phenomena using theoretical modeling. The average efficiency of erosion, when estimated to be due primarily to melting or evaporation alone, is found to be up to an order of magnitude higher at lower-energy discharges than that at higher-energy discharges.     

一种应用于故障诊断中的高效推理算法

针对经典联合树推理算法的信息传播共享和推理时间等问题, 提出一种高效联合树推理算法. 该算法基于获得的证据信息和查询节点对原始的网络结构化简, 然后在化简后的网络结构上进行联合树推理. 在信息传递过程中, 该算法可以实现不同证据下的信息共享. 经仿真验证, 高效联合树算法能够在保证准确率的同时, 以更短的时间作出诊断推理. 基于现场收集的数据, 建立水泥回转窑故障诊断系统模型并应用改进的算法实现了精准且快的故障诊断.

     

基于GAP技术的地震信息网络系统改造方案

江苏省地震信息网络系统是全省区域地震数据传输、数据交换、数据存储及信息服务的统一平台。针对网络系统目前存在的问题,提出了改造方案,即通过使用隔离网闸将业务传输系统和互连网进行物理隔离,升级网络关键设备和链路带宽,增加网络安全设备等技术手段,使网络系统达到了安全、稳定运行的目标,既满足了地震信息数据传输、交换、存储及多元化应用等的需求,又符合信息系统三级安全管理要求,可以为地震行业信息网络系统优化建设提供有益参考。     

DFT studies on armchair (5, 5) SWCNT functionalization. Modification of selected structural and spectroscopic parameters upon two-atom molecule attachment

Density functional theory (DFT) studies on adsorption of several gaseous homo- and hetero-diatomic molecules (AB) including H₂, O₂, N₂, NO and CO on external surface of H-capped pristine armchair (5, 5) single-walled carbon nanotube (SWCNT) were conducted. Structures of C₇₀H₁₀ and the corresponding C₇₀H₁₀–AB adducts were fully optimized at the B3LYP/6-311G* level of theory. Calculated HOMO/LUMO energy gaps (E_g), ¹³C NMR chemical shifts and IR/Raman parameters were analyzed and critically compared with available experimental data. Significant changes of carbon NMR atom chemical shifts (up to −100 ppm) and shielding anisotropies (up to −180 ppm) at sites of addition were observed. Functionalized SWCNTs produced IR and Raman spectra different from the pristine nanotube model. The selective changes in vibrational spectra will help in assigning the topology of functionalization at the nanotube wall.     

Modeling of microstrip antennas using neural networks techniques: A review

Artificial neural networks modeling have recently acquired enormous importance in microwave community especially in analyzing and synthesizing of microstrip antennas (MSAs) due to their generalization and adaptability features. A trained neural model estimates response very fast, which is nearly equal to its measured and/or simulated counterpart. Thus, it completely bypasses the repetitive use of conventional models as these models need rediscretization for every minor changes in the geometry, which itself is a time‐consuming exercise. The purpose of this article is to review this emerging area comprehensively for both analyzing and synthesizing of the MSAs. During reviewing process, some untouched cases are also observed, which are essentially required to be resolved for antenna designers. Unique and efficient neural networks‐based solutions are suggested for these cases. The proposed neural approaches are validated by fabricating and characterizing of the prototypes too. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:747–757, 2015.     

松花江依兰航电枢纽平面布置研究

根据1∶100物理模型试验成果,从泄流能力、船闸上下游口门区、连接段通航水流条件以及发电水头等方面,对枢纽不同布置方案进行分析和比较,并在此基础上进行优化,提出了满足主体建筑物正常安全运行要求的优化方案.