广义物质平衡计算在凝析气藏开采动态预测中的应用

从经济的角度考虑 ,对小型凝析气藏衰竭式开采动态的预测往往不必或不值得进行数值模拟研究。常规物质平衡 (黑油 )计算方法只局限于黑油和干气藏 ,应用于凝析气藏则存在很大的误差。Walsh提出的广义物质平衡计算方法 ,可用于包括黑油、干气藏、挥发油气藏和凝析气藏在内的所有油气藏。文中将一个小型凝析气藏衰竭式开采动态的数值模拟结果与广义物质平衡计算结果进行了对比 ,结果表明 ,Walsh方法简便、应用更广泛 ,可用于规模较小、不适合进行数值模拟研究的凝析气藏的现场开发优化。     

螺旋管簧的可靠性优化设计

讨论了螺旋管簧的可靠性优化设计问题。在基本随机变量的概率特性已知的情况下，采用二阶矩法和可靠性优化设计方法对螺旋管簧进行了可靠性优化设计。通过计算机程序可以直接实现螺旋管簧的可靠性优化设计，迅速准确地得到螺旋管簧的可靠性优化设计信息。     

Mesh‐independent p‐orthotropic enrichment using the generalized finite element method

This paper is aimed at presenting a simple yet effective procedure to implement a mesh‐independent p‐orthotropic enrichment in the generalized finite element method. The procedure is based on the observation that shape functions used in the GFEM can be constructed from polynomials defined in any co‐ordinate system regardless of the underlying mesh or type of element used. Numerical examples where the solution possesses boundary or internal layers are solved on coarse tetrahedral meshes with isotropic and the proposed p‐orthotropic enrichment. Copyright © 2002 John Wiley & Sons, Ltd.     

转向柱管承载能力的试验研究

在分析转向柱管花键部位应力集中情况的基础上,通过对某厂生产的转向柱管扭转破坏的试验研究,得到如下结论:①转向柱管的承载能力与其外花键齿与方向盘中心内花键齿之间的非接触区长度有关,以花键端部过渡圆弧的直径大小为宜;②安装方向盘总成时所施加在安装螺母上的拧紧力矩在70N.m左右时,转向柱管的承载能力最大。     

A note on calculating autocovariances of long-memory processes

In this paper, we consider a method (splitting) for calculating the auto- covariances of fractional integrated processes (ARFIMA) and generalized integrated processes (GARMA). The splitting method does not require any restriction on the autoregressive roots, and allows fast calculation of the autocovariances of these processes.     

T-stress in orthotropic functionally graded materials: Lekhnitskii and Stroh formalisms

A new interaction integral formulation is developed for evaluating the elastic T-stress for mixed-mode crack problems with arbitrarily oriented straight or curved cracks in orthotropic nonhomogeneous materials. The development includes both the Lekhnitskii and Stroh formalisms. The former is physical and relatively simple, and the latter is mathematically elegant. The gradation of orthotropic material properties is integrated into the element stiffness matrix using a “generalized isoparametric formulation” and (special) graded elements. The specific types of material gradation considered include exponential and hyperbolic-tangent functions, but micromechanics models can also be considered within the scope of the present formulation. This paper investigates several fracture problems to validate the proposed method and also provides numerical solutions, which can be used as benchmark results (e.g. investigation of fracture specimens). The accuracy of results is verified by comparison with analytical solutions.     

利用UTD修正的MoM-PO混合算法研究

介绍了利用矩量法(MoM)和物理光学(PO)混合方法处理复杂线体结构的电磁散射问题，提出利用pulse基函数对线电流进行展开，使得处理复杂线体结构问题变得简化，并推导出一般的矩阵方程。然后针对PO在阴影区域失效等问题，利用UTD(一致性几何绕射)对该简化模型结构下的PO区域电流进行了修正，使得其应用范围得到扩展、计算精度得到提高。文中的实例结果与传统的MoM很好的一致，从而说明了该方法的有效性和精确性。     

Inference for pth‐order random coefficient integer‐valued autoregressive processes

Abstract. A pth‐order random coefficient integer‐valued autoregressive [RCINAR(p)] model is proposed for count data. Stationarity and ergodicity properties are established. Maximum likelihood, conditional least squares, modified quasi‐likelihood and generalized method of moments are used to estimate the model parameters. Asymptotic properties of the estimators are derived. Simulation results on the comparison of the estimators are reported. The models are applied to two real data sets.