采用ZnO灭磁时阀片均流/均能的探讨

从ZnO电阻的非线性特性出发,对采用ZnO作为灭磁电阻时阀片的均流/均能进行理论论述,指出阀片均能性能的好坏主要依赖于阀片自身的特性;分析比较了ZnO阀片的不同选择方法对均流/均能的影响,指出阀片的均流/均能很大程度上取决于可供选择的阀片的库存量.该研究为发电机励磁系统的安全稳定运行提供了有力的保证.     

Stability of large-scale coal-fired MHD channels

Stability of large-scale coal-fired MHD channels is studied by (1) linearized stability analysis, and (2) time-dependent 1-D analysis. The channel length is 15 m with 600 electrode pairs, and the output power ranges from 220.6 MW through 258.7 MW. Linearized stability analyses show that the Faraday channels operated with fixed loading resistance are stable, whereas the two waves of u and u–a (u, a: gas and sound velocity) become unstable in the Faraday channel with fixed loading factor. Two waves of u and u–a are unstable in the diagonal channel with fixed loading current and the u + a wave becomes unstable in the diagonal channel with fixed electrode current. Time-dependent one-dimensional analyses indicate that the Faraday channels with fixed load resistance are smooth without growth of fluctuation. The diagonal channels with fixed electrode current are smooth with no fluctuation, though the linear theory indicates that the u + a wave is unstable. The diagonal channel with fixed load current suffers large disturbance along the latter half of the channel, being consistent with the linearized analysis which indicates that the u - a and u waves are unstable.     

一种新的抖动调制方法

本文在脉冲延迟发生的基础上提供了一种用调相方法实现抖动调制的方案。该采用数字电路，与传统的调频方法比较具有易实现，精度高等优点，并为进一步开发出抖动测试集资打下了基础。     

�±���������͹��ữ���ֳ�ʩ��������Է���

本文介绍了陕北气区陕35井第一次下光油管(即不带封隔器)酸化的施工情况,并结合该地区的地层压力特征分析了光油管酸化施工的可行性及应用限度。     

K202A压缩机电机轴瓦超温的原因及对策

K202A压缩机的电机轴瓦采用的是动压轴承,经常持续升温。其主要原因是由于滑动轴承和轴之间是半液体摩擦,润滑油在轴颈及轴瓦之间没有形成具有足够压力的油膜,造成滑动轴承和轴局部形成半液体摩擦而产生大量的热量,又无法被带走引起的。文章通过验算K202压缩机电机滑动轴承温度,分析影响滑动轴承运行温度的因素,提出在原滑动轴承上开油楔及加装一台齿轮油泵为滑动轴承强制润滑,并且通过联轴器把电机和压缩机连接起来,用压缩机轴瓦托起电机轴,使电机轴颈和轴瓦之间处于液体摩擦状态,可有效地降低滑动轴承的运行温度。     

鄂北地区气测现场解释评价研究

鄂尔多斯盆地鄂北地区现场气测录井由于受多种因素影响,解释符合率相对较低。针对这一问题,在探讨影响气测录井显示因素、识别气测异常的基础上,分析了消除影响因素的途径和校正公式,建立了随钻全烃与全脱全烃的关系式,论述了地面和地层含气量计算方法。在初步评价气显示性质条件下,经统计分析得出了应用4参数——峰面积、校正全烃值、全烃计算值和地层含气量加权分值的解释评价标准,为鄂北地区气测录井解释评价和产能的初步预测探索了一种新模式,不但解决了鄂北地区气测解释符合率低的问题,而且对于深入开展气测录井参数与油气解释评价研究具有一定的参考意义。     

一种新型桩基动测激振设备的研制

论述桩基承载力检测的新激振设备的设计，制作和安装，根据试验和对实际工程中桩基础的应用结果，表明该激振设备工作性能良好，使用方便，测试结果可靠。     

内燃机电站噪声控制

针对150kVA内燃机电站的噪声特点 ,应用噪声控制原理 ,对其进行了控制 ,取得了较好的效果     

振动沉管挤密碎石桩在闸基处理中的应用

振动沉管挤密碎石桩是近十几年来在挤密砂桩和振冲桩的基础上发展起来的地基处理新技术,具有设备简单、操作方便、成本低、施工快、无污染等特点，被工程界广泛使用，积累了一定的工程经验。其在共产主义闸地基处理中的应用即为一例。     

Heat loss and thermoelectric generator design

With the object of evaluating its importance to thermoelectric generator design, heat loss is introduced into the standard thermoelectric generator design theory. The theory for both the constant hot and cold junction temperatures model and the constant heat input model are so modified. The modification is first order and, therefore, is limited to small leg heat-transfer coefficients. Numerical results using representative properties show that significant differences can exist between the optimum geometry and performance of a generator idealized as lossless and those of a generator designed by the modified theory. The largest differences occur with the constant heat input model.