长链脂肪族氧化胺对合成纤维的抗静电作用

研究了题示表面活性剂对涤纶和丙纶的抗静电性能,探讨了不同结构的脂肪族氧化胺的抗静电效果和环境湿度、上油量对其抗静电性的影响。认为:氧化胺在低湿(30%RH)条件下也能保持良好的抗静电作用;二甲基十二烷基氧化胺在同类物中的抗静电性最佳(比电阻为0.95×10~8Ω);氧化胺作丙纶油剂的抗静电组分,可提高丙纶的加工性能和成品质量;氧化胺在纤维上的上油量(0.06%)相当低时也显示了较好的抗静电作用。     

Transition phenomena of polymers in mixed solvents in the vicinity of theta conditions: Effect of preferential adsorption

Viscosimetric measurements were obtained with the ternary systems polystyrene/dioxane/methanol, polystyrene/benzene/methanol and poly(methyl methacrylate)/dioxane/cyclohexane, changing the solvent mixture composition at constant temperature. The polystyrene and poly(methyl methacrylate) systems exhibit a transition phenomenon with solvent-mixture composition in which the polymer is just above the theta condition. In the case where two theta conditions occur ((θ-intra, θ-inter) the transition point is closely related to the intramolecular theta conditions. Moreover the intramolecular theta conditions vary with the molecular weight in the region of molecular weights where the preferential adsorption also varies. This variation induces a variation of the transition point with molecular weight which obeys a formula analogous to that giving the variation of the preferential adsorption with molecular weight.     

Copper ⇌ Alkali Ion Exchange of Alkali Aluminosillcate Glasses in Copper-Containing Molten Salt: I, Monovalent Copper Salt, CuCl

Cu⁺⇌ R⁺ (R = Li, Na, and K) ion exchange experiments were conducted for 20R₂O·10Al₂O₃·70SiO₂ glasses in molten CuCl at 550°C in air and nitrogen atmospheres. The depth profiles of the copper incorporated into glasses were determined with an electron microprobe X-ray analyzer. The total amount of diffusing copper, M _t, strongly depended on the type of alkali ion in the glass and the ion-exchange atmosphere; i.e., M _t increased with increasing cationic size in the order Li < Na < K and M _t was greater in air than in nitrogen. The Cu ⇌ R⁺ ion exchange kinetics are discussed in detail.     

Light-sensitive elastomers modified by 4-(N-dimethylmaleimido)-benzenesulphenyl chloride

New light-sensitive polymers were prepared by modification of four different elastomers with 4-(N-dimethylmaleimido)-benzenesulphenyl chloride (DMI-BSCI). Polydienes modified by DMI-BSCI form block copolymers. These polymers show a strong increase of the glass transition temperature T_g whereby the T_g increase of modified poly(octenamer) is much smaller. Higher modified polydienes have two T_g. Modified poly(octenamers) show a melting temperature dependence T_m on the content of trans double bonds which is characteristic of statistical copolymers. The ratio of rate constants with which trans- and cis-structures in poly(octenamer) are occupied by DMI-BSCI, is

$\text{k}{}_{\mathrm{trans}}\text{k}{}_{\mathrm{cis}}\text{= 0.34}$

     

Phase separation in polymer blends comprising copolymers: 6. Effect of molecular architecture of block copolymers

To study the effect of the molecular architecture of a copolymer on its miscibility with corresponding homopolymers a series of block copolymers of styrene and isoprene with diblock, triblock and four-arm star architectures have been prepared and the morphologies of the blends of the copolymers and polyisoprene with different molecular weights have been examined by electron microscopy. The results show that miscibility varies in the sequence diblock>triblock>four-arm star copolymers. This sequence is in the opposite direction to the variation of the architectural complexity of the block copolymers, i.e. the more complex is molecular architecture, the greater is conformation restriction in microdomain formation and the less is solubility of homopolymer in corresponding domains.     

型钢翼缘狗骨式削弱在型钢混凝土节点的作用

为了防止地震时型钢混凝土节点核心区发生剪切破坏以及梁柱连接焊缝发生脆性断裂,提出对型钢混凝土节点核心区附近梁端型钢的上、下翼缘采取狗骨式削弱,并系统研究翼缘削弱对提高型钢混凝土节点抗震性能的作用.研究表明,由于在梁端型钢翼缘采取狗骨式削弱,不仅能够将塑性铰控制在梁型钢削弱的位置,从而有效地降低了节点核心区所受的剪力以及梁柱连接焊缝的应力;而且能够改善节点塑性铰区的转动能力和抗剪性能,提高节点的延性和耗能能力.     

新型纤维素基螯合纤维的制备与吸附性能

为了发展水处理的途径,制备了β-环糊精改性的新型纤维素基螯合纤维.运用原子吸收光谱和紫外光谱考察了其对模拟水样中重金属离子(Cu2+)和有机染料(中性红)的吸附性能.实验结果表明,螯合纤维对Cu2+吸附率达6.24 mg/g,符合Langmuir吸附模型;对中性红也具有较强的包结能力.该鏊合纤维水处理能力强,制备简单,操作简便,有潜在的应用价值.     

预应力片材加固负载RC梁受弯承载力分析

分析有初始弯矩作用时,预张纤维片材粘贴加固混凝土梁中加固材料相对该处混凝土滞后应变或超前应变的计算方法和纤维片材中有效预应力的取值;对预应力FRP粘贴加固梁构成的复合截面,分析各种可能应变组合下的受弯极限状态,给出两大弯曲破坏类型(分别由片材拉断和混凝土压碎引发)的界限判别条件和极限承载力计算表达式.试验分析表明,极限承载力试验值与计算值比值的均值为0.99,变异系数为0.047.     

双洞口配筋砌块砌体框支墙梁试验

为研究双洞口配筋砌块砌体框支墙梁地震前后的受力模式,在拟动力子试验前后进行了底层框架配筋砌块短肢砌体剪力墙结构三层足尺模型的竖向力静载试验.试验结果表明:托梁与上部墙体表现出良好的协同工作能力,其工作模式为拉杆拱.通过对其在拟动力试验前后的受力模式进行了比较,可知带洞口配筋砌块砌体框支墙梁结构体系在墙体受到一定损伤时,并不会使墙梁的受力机理发生明显改变.     

CFRP加固钢筋混凝土梁滞后应变计算方法

为了系统研究从零负载状态到满负载状态各个阶段CFRP片材加固梁滞后应变的计算方法,在充分考虑加固梁不同负载状态及受压区混凝土非线性本构关系的基础上,分别建立了不同负载贴片加固梁考虑混凝土抗拉作用时的滞后应变计算公式及不考虑混凝土抗拉作用时的简化计算公式.试验数据和对比分析结果表明:"考虑混凝土抗拉作用"公式的计算结果与试验数据吻合良好,计算误差<8%,明显优于现有文献的计算方法;"不考虑受拉区混凝土抗拉作用"公式的计算结果在混凝土开裂前和试验值相差较大,但对已裂加固梁的计算误差与"考虑混凝土抗拉作用"公式的计算误差接近.为简化计算,对未裂和已裂混凝土梁贴片加固时的滞后应变可分别采用"换算截面"公式和"不考虑混凝土抗拉作用"公式进行计算,两种简化方法的误差均不会超过10%.