Preparation of ordered mesoporous SiCN ceramics with large surface area and high thermal stability

For the first time, highly ordered two-dimensional (2-D) and three-dimensional (3-D) mesoporous SiCN ceramics with high surface area and high thermal stability were prepared by nanocasting a preceramic polymer solution into mesoporous carbon templates, CMK-3 and CMK-8, respectively. As a negative replica of CMK-3 carbon, the obtained mesoporous SiCN ceramic possessed an ordered 2-D hexagonal mesostructure, which is similar to the structure of SBA-15 silica except for the reduced dimensions. An ordered 3-D cubic mesoporous SiCN ceramic was also fabricated using CMK-8 as a template. The wall of the mesoporous SiCN replicas consisted of an amorphous SiCN ceramic phase, which possessed high thermal stability at high temperature up to 1000 °C. N₂-sorption isotherms revealed that these ordered mesoporous SiCN ceramics have high BET surface areas (up to 472 m² g⁻¹) and narrow pore-size distributions, which was preserved even after a re-treatment at 1000 °C in air. The use of carbon template played an important role in the preparation of mesoporous SiCN replicas and enhanced the thermal stability of the SiCN products. It is expected that many other types of ordered mesoporous ceramics can be prepared from nanoporous carbon by nanocasting method.     

Sulfonated polyimide and poly (ethylene glycol) diacrylate based semi‐interpenetrating polymer network membranes for fuel cells

Semi‐interpenetrating polymer network (semi‐IPN) membranes based on novel sulfonated polyimide (SPI) and poly (ethylene glycol) diacrylate (PEGDA) have been prepared for the fuel cell applications. SPI was synthesized from 1,4,5,8‐naphthalenetetracarboxylic dianhydride, 4,4′‐diaminobiphenyl 2,2′‐disulfonic acid, and 2‐bis [4‐(4‐aminophenoxy) phenyl] hexafluoropropane. PEGDA was polymerized in the presence of SPI to synthesize semi‐IPN membranes of different ionic contents. These membranes were characterized by determining, ion exchange capacity, water uptake, water stability, proton conductivity, and thermal stability. The proton conductivity of the membranes increased with increasing PEGDA content in the order of 10^?1 S cm^?1 at 90°C. These interpenetrating network membranes showed higher water stability than the pure acid polyimide membrane. This study shows that semi‐IPN SPI membranes based on PEGDA which gives hydrophilic group and structural stability can be available candidates comparable to Nafion® 117 over 70°C. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Synthesis and water absorbency of crosslinked superabsorbent polymers

A series of novel copolymer superabsorbents based on monomer acrylamide (AM), potassium methacrylate (KMA), and 2‐hydroxyethyl methacrylate (HEMA) were prepared by copolymerization using ammonium persulfate (APS) as an initiator and N,N‐methylenebisacrylamide (MBA) as a crosslinking agent. The synthetic variables (the monomer concentration, crosslinker concentration, and initiator concentration) were also studied. The experimental results of superabsorbent polymers (SAPs) show a better absorbency in both water and NaCl solutions. The copolymers were characterized by IR spectroscopy. The water retention in the soil was enhanced using the above superabsorbents. The use of SAPs for the growth of groundnut plants was also investigated. SAPs can be considered for water‐managing materials for agriculture and horticulture purposes in desert and drought‐prone areas. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1795–1801, 2002     

Al2O3 coated glass by aerosol deposition with excellent mechanical properties for mobile electronic displays

Al₂O₃ thin film was deposited on Gorilla glass using an aerosol deposition method to improve the mechanical property of cover glass for mobile electronic device. The deposited Al₂O₃ film (approximately 1 μm thick) was a polycrystalline structure and showed a high light transmittance of approximately 90% in the visible light region. The CIE color space (L*a*b) measurement also showed a characteristic corresponding to the acceptable optical range of the cover glass. Further, it was confirmed that the bending strength improved by 10 %, as compared with bare Gorilla glass (from 6970 kgf/cm² to 7704 kgf/cm²), and the Vickers hardness increased to approximately 1700–2000 HV, as compared with that of Gorilla glass (<700 HV). Owing to the improved mechanical properties, the Al₂O₃ thin film exhibited good anti-scratch properties and is expected to be applied to the cover glass of various display products.     

PVdF-HFP/P123 hybrid with mesopores: a new matrix for high-conducting, low-leakage porous polymer electrolyte

Highly conducting porous polymer electrolytes comprised of poly(vinylidene-fluoride-co-hexafluoropropylene) (PVdF-HFP), polyethylene oxide-co-polypropylene oxide-co-polyethylene oxide (P123), ethylene carbonate (EC), propylene carbonate (PC), and LiClO₄ were fabricated. The PVdF-HFP/P123 hybrid polymer membranes were made with a phase inverse method and the electrolyte solution uptake was carried out in glove box to avoid the moisture contamination. It was found that when a small amount of polymer surfactant (P123) was blended into the PVdF-HFP, mesopores with well-defined sizes were formed. Impedance spectroscopy showed that the room temperature conductivity of (PVdF-HFP)/P123 polymer electrolytes increased as the content of P123 increased up to 4×10⁻³ S/cm. Nitrogen adsorption isotherms, electrolyte solution uptake, porosity measurements, and SEM micrographs showed that the enhanced conductivity was due to increase the pore volume, pore density, and electrolyte uptake. The highest conduction was found when the weight ratio of P123 to PVdF-HFP was 70%, when big channels were formed in the hybrid polymer membrane. Furthermore, blending P123 in PVDF-HFP reduced the pore size of polymer membrane, therefore, the solution leakage was also reduced. These polymer electrolytes were stable up to 4.5 V (vs Li/Li⁺) and the performance of the model lithium ion battery made by sandwiching the polymer electrolyte between a LiCoO₂ anode and a MCMB cathode, showed great promise for the use of these polymer electrolytes in lithium ion batteries.     

Conformational disorder in the Brill transition of uniaxially-oriented nylon 10/10 sample investigated through the temperature-dependent measurement of X-ray fiber diagram

X-ray fiber diagram of uniaxially-oriented nylon 10/10 sample has been measured at the various temperatures. The 11th layer line originating from the methylene zigzag sequences became diffuse above the Brill transition region (140-170 °C), while the layer reflections corresponding mainly to the original repeating period of the parent nylon chains were kept almost unchanged. This observation makes us confirm that in the Brill transition region, the conformational disordering occurs in the methylene sequential parts with keeping the repeating period of the whole skeletal chain by still forming the intermolecular hydrogen bonds between the amide groups of the neighboring chains. This conclusion is consistent with the already-reported infrared spectral data. The characteristic X-ray diffraction patterns observed at the various temperatures were reproduced well by a computer simulation technique utilizing the previously-reported molecular dynamics calculation results.     

产业及装饰用聚酰胺纤维产品的应用状况与开发前景

聚酰胺纤维以其强度、耐磨性、弹性恢复率、韧性等优良性能在产业用纺织品和装饰用纺织品方面的应用日趋扩大，如在轮胎帘子布、汽车用纺织品、过滤材料、ＢＣＦ地毯膨体纱、特种和军用纺织品上都开发了新产品，受到了市场的欢迎。面对化纤品种结构和市场需求的不断变化，聚酰胺纤维产品应着眼于其性能特点，发展优势产品，拓宽应用面，在化纤市场中占据一定的位置。     

Retrograde Densification of Calcined and Glass Precursors of Approximate (Bi,Pb)2Sr2Ca2Cu3O10 Stoichiometry

Retrograde densification of pelletized calcines and glasses having an approximate (Bi,Pb)₂Sr₂Ca₂Cu₃O₁₀ starting stoichiometry and sintered at ∼850°C can be described by first-order rate equations. Retrograde densification in the calcine precursors was largely due to the development of open pores, and was approximately proportional to the concentration of the (Bi,Pb)₂Sr₂CaCu₃O₁₀ phase. In the glasses, retrograde densification is mainly caused by porosity accompanying the growth of a needlelike Sr─Ca─Cu─O phase, together with (Bi,Pb)₂Sr₂Ca₂Cu₃O₁₀ and (Bi,Pb)₂Sr₂CaCu₂O₈.     

Macromolecular anchoring layers for polymer grafting: comparative study

Comparative study of efficiency of macromolecular anchoring layers in the grafting of end-functionalized polymers to a surface was conducted. Poly(glycidyl methacrylate) (PGMA) and epoxydized polybutadienes (EPB) were utilized as the primary anchoring films. Amount of the epoxy moieties introduced to the surface was varied via thickness of the modifying polymer layer or amount of epoxy groups in the polymer backbone. Comparison between the grafting of polystyrene and poly(ethylene glycol) to the various macromolecular anchoring layers indicated that grafting ability of a layer was mostly governed by thickness of the interpenetration zone between the two polymers (anchoring and being grafted). In case of low level of the interpenetration, only functional groups at the periphery of the primary polymer layer were available for the grafting. Then, amount of grafted polymer did not increase with total number of epoxy groups in the anchoring film. However, as the thickness of the interpenetration zone increased, higher amount of the functional groups become available for the grafting.